From 828d719ac1180d9d0862d3ada7f9a7afc65c1035 Mon Sep 17 00:00:00 2001
From: Steve Gotthardt <gotthardt@rockbox.org>
Date: Fri, 13 Jul 2007 04:18:31 +0000
Subject: Changes bass setting to use adaptive bass instead of linear bass. The
 datasheet recommends it and it should stop clipping on bass. Steve Gotthardt.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13867 a1c6a512-1295-4272-9138-f99709370657
---
 firmware/drivers/audio/wm8751.c   | 25 +++++++++++++++++++++++++
 firmware/export/config-gigabeat.h |  3 +++
 2 files changed, 28 insertions(+)

diff --git a/firmware/drivers/audio/wm8751.c b/firmware/drivers/audio/wm8751.c
index 426036aab0..4a17496111 100644
--- a/firmware/drivers/audio/wm8751.c
+++ b/firmware/drivers/audio/wm8751.c
@@ -31,7 +31,11 @@
 
 const struct sound_settings_info audiohw_settings[] = {
     [SOUND_VOLUME]        = {"dB", 0,  1, -74,   6, -25},
+#ifdef USE_ADAPTIVE_BASS
+    [SOUND_BASS]          = {"",   0,  1,   0,  15,   0},
+#else
     [SOUND_BASS]          = {"dB", 1, 15, -60,  90,   0},
+#endif
     [SOUND_TREBLE]        = {"dB", 1, 15, -60,  90,   0},
     [SOUND_BALANCE]       = {"%",  0,  1,-100, 100,   0},
     [SOUND_CHANNELS]      = {"",   0,  1,   0,   5,   0},
@@ -47,7 +51,11 @@ const struct sound_settings_info audiohw_settings[] = {
 #define LOUT2_BITS      (LOUT2_LO2ZC)
 #define ROUT2_BITS      (ROUT2_RO2ZC | ROUT2_RO2VU)
 /* We use linear bass control with 200 Hz cutoff */
+#ifdef USE_ADAPTIVE_BASE
+#define BASSCTRL_BITS   (BASSCTRL_BC | BASSCTRL_BB)
+#else
 #define BASSCTRL_BITS   (BASSCTRL_BC)
+#endif
 /* We use linear treble control with 4 kHz cutoff */
 #define TREBCTRL_BITS   (TREBCTRL_TC)
 
@@ -85,6 +93,18 @@ static int tone_tenthdb2hw(int value)
     return value;
 }
 
+
+#ifdef USE_ADAPTIVE_BASS
+static int adaptivebass2hw(int value)
+{
+    /* 0 to 15 step 1 - step -1  0 = off is a 15 in the register */
+    value = 15 - value;
+
+    return value;
+}
+#endif
+
+
 void audiohw_reset(void);
 
 /* Reset and power up the WM8751 */
@@ -162,7 +182,12 @@ int audiohw_set_mixer_vol(int channel1, int channel2)
 void audiohw_set_bass(int value)
 {
     wmcodec_write(BASSCTRL, BASSCTRL_BITS |
+
+#ifdef USE_ADAPTIVE_BASS
+        BASSCTRL_BASS(adaptivebass2hw(value)));
+#else
         BASSCTRL_BASS(tone_tenthdb2hw(value)));
+#endif
 }
 
 void audiohw_set_treble(int value)
diff --git a/firmware/export/config-gigabeat.h b/firmware/export/config-gigabeat.h
index 5f45bdbff0..6264ab5087 100644
--- a/firmware/export/config-gigabeat.h
+++ b/firmware/export/config-gigabeat.h
@@ -70,6 +70,9 @@
 /* Define this if you have the WM8975 audio codec */
 #define HAVE_WM8751
 
+/* Define this if you want to use the adaptive bass capibility of the 8751 */
+#define USE_ADAPTIVE_BASS
+
 #define BATTERY_CAPACITY_DEFAULT 2000 /* default battery capacity */
 
 #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \
-- 
cgit v1.2.3