From 7cfd418a9bce7d092b671c0ea42520f68f6b6df1 Mon Sep 17 00:00:00 2001 From: Rob Purchase Date: Sun, 11 Oct 2009 21:12:06 +0000 Subject: D2: Reduce binsize a bit by using arrays for the PMU initialisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23120 a1c6a512-1295-4272-9138-f99709370657 --- firmware/drivers/pcf50606.c | 24 +++++---- firmware/drivers/pcf50635.c | 124 +++++++++++++++++++++++++++----------------- 2 files changed, 91 insertions(+), 57 deletions(-) diff --git a/firmware/drivers/pcf50606.c b/firmware/drivers/pcf50606.c index 4ef747fe80..d44718c58b 100644 --- a/firmware/drivers/pcf50606.c +++ b/firmware/drivers/pcf50606.c @@ -54,15 +54,21 @@ int pcf50606_read_multiple(int address, unsigned char* buf, int count) void pcf50606_init(void) { #ifdef COWON_D2 - /* Set outputs as per OF - further investigation required. */ - pcf50606_write(PCF5060X_DCDEC1, 0xe4); - pcf50606_write(PCF5060X_IOREGC, 0xf5); - pcf50606_write(PCF5060X_D1REGC1, 0xf5); - pcf50606_write(PCF5060X_D2REGC1, 0xe9); - pcf50606_write(PCF5060X_D3REGC1, 0xf8); /* WM8985 3.3v */ - pcf50606_write(PCF5060X_DCUDC1, 0xe7); - pcf50606_write(PCF5060X_LPREGC1, 0x0); - pcf50606_write(PCF5060X_LPREGC2, 0x2); + /* Set outputs as per OF - further investigation required. */ + static const char init_data[] = + {PCF5060X_DCDEC1, 0xe4, + PCF5060X_IOREGC, 0xf5, + PCF5060X_D1REGC1, 0xf5, + PCF5060X_D2REGC1, 0xe9, + PCF5060X_D3REGC1, 0xf8, /* WM8985 3.3v */ + PCF5060X_DCUDC1, 0xe7, + PCF5060X_LPREGC1, 0x0, + PCF5060X_LPREGC2, 0x2, + 0}; + + const char* ptr; + for (ptr = init_data; *ptr != 0; ptr += 2) + pcf50606_write(ptr[0], ptr[1]); #endif } diff --git a/firmware/drivers/pcf50635.c b/firmware/drivers/pcf50635.c index c436498670..9ccf5e29e2 100644 --- a/firmware/drivers/pcf50635.c +++ b/firmware/drivers/pcf50635.c @@ -55,56 +55,84 @@ int pcf50635_read_multiple(int address, unsigned char* buf, int count) void pcf50635_init(void) { #ifdef COWON_D2 - /* Configure outputs as per OF */ - pcf50635_write(PCF5063X_REG_DOWN1OUT, 0x13); /* DOWN1 = 1.2V */ - pcf50635_write(PCF5063X_REG_DOWN1CTL, 0x1e); /* DOWN1 DVM step = max */ - pcf50635_write(PCF5063X_REG_DOWN1ENA, 0x1); /* DOWN1 enable */ - pcf50635_write(PCF5063X_REG_DOWN2OUT, 0x2f); /* DOWN2 = 1.8V */ - pcf50635_write(PCF5063X_REG_DOWN2CTL, 0x1e); /* DOWN2 DVM step = max */ - pcf50635_write(PCF5063X_REG_DOWN2ENA, 0x1); /* DOWN2 enable */ - pcf50635_write(PCF5063X_REG_AUTOOUT, 0x5f); /* AUTO = 3.0V */ - pcf50635_write(PCF5063X_REG_AUTOENA, 0x1); /* AUTO enable */ - pcf50635_write(PCF5063X_REG_LDO1OUT, 0x18); /* LDO1 = 3.3V */ - pcf50635_write(PCF5063X_REG_LDO1ENA, 0x1); /* LDO1 enable */ - pcf50635_write(PCF5063X_REG_LDO2OUT, 0x15); /* LDO2 = 3.0V */ - pcf50635_write(PCF5063X_REG_LDO2ENA, 0x1); /* LDO2 enable */ - pcf50635_write(PCF5063X_REG_LDO3ENA, 0x0); /* LDO3 disable */ - pcf50635_write(PCF5063X_REG_LDO4OUT, 0x15); /* LDO4 = 3.0V */ - pcf50635_write(PCF5063X_REG_LDO4ENA, 0x1); /* LDO4 enable */ - pcf50635_write(PCF5063X_REG_LDO5OUT, 0x9); /* LDO5 = 1.8V */ - pcf50635_write(PCF5063X_REG_LDO5ENA, 0x1); /* LDO4 enable */ - pcf50635_write(PCF5063X_REG_LDO6OUT, 0xc); /* LDO6 = 2.1V */ - pcf50635_write(PCF5063X_REG_LDO6ENA, 0x1); /* LDO4 enable */ - pcf50635_write(PCF5063X_REG_HCLDOENA, 0x0); /* HCLDO disable */ - - /* Configure automatic battery charging as per OF */ + static const char init_data[] = + { + /* DOWN1: 1.2V, max DVM step, enabled */ + PCF5063X_REG_DOWN1OUT, 0x13, + PCF5063X_REG_DOWN1CTL, 0x1e, + PCF5063X_REG_DOWN1ENA, 0x1, + + /* DOWN2: 1.8V, max DVM step, enabled */ + PCF5063X_REG_DOWN2OUT, 0x2f, + PCF5063X_REG_DOWN2CTL, 0x1e, + PCF5063X_REG_DOWN2ENA, 0x1, + + /* AUTO: 3.0V, enabled */ + PCF5063X_REG_AUTOOUT, 0x5f, + PCF5063X_REG_AUTOENA, 0x1, + + /* LDO1: 3.3V, enabled */ + PCF5063X_REG_LDO1OUT, 0x18, + PCF5063X_REG_LDO1ENA, 0x1, + + /* LDO2: 3.0V, enabled */ + PCF5063X_REG_LDO2OUT, 0x15, + PCF5063X_REG_LDO2ENA, 0x1, + + /* LDO4: 3.0V, enabled */ + PCF5063X_REG_LDO4OUT, 0x15, + PCF5063X_REG_LDO4ENA, 0x1, + + /* LDO5: 1.8V, enabled */ + PCF5063X_REG_LDO5OUT, 0x9, + PCF5063X_REG_LDO5ENA, 0x1, + + /* LDO6: 2.1V, enabled */ + PCF5063X_REG_LDO6OUT, 0xc, + PCF5063X_REG_LDO6ENA, 0x1, + + /* LDO3 and HCLDO disabled */ + PCF5063X_REG_LDO3ENA, 0x0, + PCF5063X_REG_HCLDOENA, 0x0, + + /* Disable GPIOs */ + PCF5063X_REG_GPIOCTL, 0x0, + PCF5063X_REG_GPIO1CFG, 0x0, + PCF5063X_REG_GPIO2CFG, 0x0, + PCF5063X_REG_GPIO3CFG, 0x0, + + /* IRQ masks (OF values in brackets) */ + PCF5063X_REG_INT1M, 0xff, /* (0x8a enable alarm, usbins, adpins) */ + PCF5063X_REG_INT2M, 0xff, /* (0xff all masked) */ + PCF5063X_REG_INT3M, 0xff, /* (0x7f enable onkey1s) */ + PCF5063X_REG_INT4M, 0xff, /* (0xfd enable lowbat) */ + PCF5063X_REG_INT5M, 0xff, /* (0xff all masked) */ + + /* Wakeup mode */ + PCF5063X_REG_OOCMODE, 0x0, /* onkey falling edge */ + PCF5063X_REG_OOCCTL, 0x2, /* actphrst = phase 3 */ + PCF5063X_REG_OOCWAKE, 0xc1, /* wakeup on adapter, usb, onkey */ + + /* Configure battery charger as per OF */ + PCF5063X_REG_MBCC2, 0xa8, /* Vmax = 4.2V, Vbatcond = 2.7V, long debounce */ + PCF5063X_REG_MBCC3, 0x2a, /* precharge level = 16% */ + PCF5063X_REG_MBCC4, 0x94, /* fastcharge level = 58% */ + PCF5063X_REG_MBCC5, 0xff, /* fastcharge level (usb) = 100% */ + PCF5063X_REG_MBCC6, 0x4, /* cutoff level = 12.5% */ + PCF5063X_REG_MBCC7, 0xc1, /* bat-sysImax = 2.2A, USB = 500mA */ + PCF5063X_REG_BVMCTL, 0xe, /* batok level = 3.4V */ + + /* end marker */ + 0}; + + const char* ptr; + for (ptr = init_data; *ptr != 0; ptr += 2) + pcf50635_write(ptr[0], ptr[1]); + + /* Enable automatic charging, preserving default values */ pcf50635_write(PCF5063X_REG_MBCC1, - pcf50635_read(PCF5063X_REG_MBCC1) | 7); /* auto charge termination & resume */ - pcf50635_write(PCF5063X_REG_MBCC2, 0xa8); /* Vmax = 4.2V, Vbatcond = 2.7V, long debounce */ - pcf50635_write(PCF5063X_REG_MBCC3, 0x2a); /* precharge level = 16% */ - pcf50635_write(PCF5063X_REG_MBCC4, 0x94); /* fastcharge level = 58% */ - pcf50635_write(PCF5063X_REG_MBCC5, 0xff); /* fastcharge level (usb) = 100% */ - pcf50635_write(PCF5063X_REG_MBCC6, 0x4); /* cutoff level = 12.5% */ - pcf50635_write(PCF5063X_REG_MBCC7, 0xc1); /* bat-sysimax = 2.2A, USB = 500mA */ - pcf50635_write(PCF5063X_REG_BVMCTL, 0xe); /* batok level = 3.4V */ + pcf50635_read(PCF5063X_REG_MBCC1) | 7); - /* IRQ masks */ - pcf50635_write(PCF5063X_REG_INT1M, 0x8a); /* enable alarm, usbins, adpins */ - pcf50635_write(PCF5063X_REG_INT2M, 0xff); /* mask all */ - pcf50635_write(PCF5063X_REG_INT3M, 0x7f); /* enable onkey1s */ - pcf50635_write(PCF5063X_REG_INT4M, 0xfd); /* enable lowbat */ - pcf50635_write(PCF5063X_REG_INT5M, 0xff); /* mask all */ - - pcf50635_write(PCF5063X_REG_OOCMODE, 0x0); - pcf50635_write(PCF5063X_REG_OOCCTL, 0x2); /* actphrst = phase 3 */ - pcf50635_write(PCF5063X_REG_OOCWAKE, /* adapter, usb, (rtc) wake */ - (pcf50635_read(PCF5063X_REG_OOCWAKE) & 0x10) | 0xc1); - - /* We don't care about the GPIOs, disable them */ - pcf50635_write(PCF5063X_REG_GPIOCTL, 0x0); - pcf50635_write(PCF5063X_REG_GPIO1CFG, 0x0); - pcf50635_write(PCF5063X_REG_GPIO2CFG, 0x0); - pcf50635_write(PCF5063X_REG_GPIO3CFG, 0x0); #endif } -- cgit v1.2.3