From 60e2cd6de946c0c473c0e9bfde5b7b1d47a5b28f Mon Sep 17 00:00:00 2001 From: Tomasz Moń Date: Thu, 8 Jul 2021 18:23:18 +0200 Subject: DM320: Regorganize LCD and TTB memory layout Do not introduce any change for M:Robe 500 as it uses the two LCD frames in non-obvious way. Sansa Connect and Creative ZVM use only single front framebuffer. Place TTB at DRAM end to minimize memory loss due to alignment. Reserve as little as possible memory for the LCD frames. On Sansa Connect this change extends audio buffer by 858 KiB. Change-Id: I21bdeec4cfba86d71803a39acd651a87e73767e6 --- apps/plugins/plugin.lds | 11 ++++-- firmware/export/dm320.h | 4 +++ firmware/target/arm/tms320dm320/app.lds | 60 +++++++++++++++++++++----------- firmware/target/arm/tms320dm320/boot.lds | 60 +++++++++++++++++++++----------- 4 files changed, 93 insertions(+), 42 deletions(-) diff --git a/apps/plugins/plugin.lds b/apps/plugins/plugin.lds index cc0be3abd5..fac47d8c45 100644 --- a/apps/plugins/plugin.lds +++ b/apps/plugins/plugin.lds @@ -36,7 +36,6 @@ OUTPUT_FORMAT(elf32-littlemips) #elif CONFIG_CPU==DM320 -/* Give this 1 meg to allow it to align to the MMU boundary */ #ifndef LCD_NATIVE_WIDTH #define LCD_NATIVE_WIDTH LCD_WIDTH #endif @@ -45,9 +44,17 @@ OUTPUT_FORMAT(elf32-littlemips) #define LCD_NATIVE_HEIGHT LCD_HEIGHT #endif +#ifdef MROBE_500 +/* Give this 1 meg to allow it to align to the MMU boundary */ #define LCD_FUDGE LCD_NATIVE_WIDTH%32 -#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) +#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) #define LCD_TTB_AREA 0x100000*((LCD_BUFFER_SIZE>>19)+1) +#else +/* must be 16Kb (0x4000) aligned */ +#define TTB_SIZE (0x4000) +#define LCD_BUFFER_SIZE (LCD_NATIVE_WIDTH*LCD_NATIVE_HEIGHT*2) +#define LCD_TTB_AREA (TTB_SIZE + LCD_BUFFER_SIZE) +#endif #define DRAMSIZE (MEMORYSIZE * 0x100000) - STUBOFFSET - PLUGIN_BUFFER_SIZE - CODEC_SIZE - LCD_TTB_AREA diff --git a/firmware/export/dm320.h b/firmware/export/dm320.h index 01f206bfc9..bd6ca15407 100644 --- a/firmware/export/dm320.h +++ b/firmware/export/dm320.h @@ -30,13 +30,17 @@ #if !defined(__ASSEMBLER__) && !defined(__LD__) /* These variables are created during linking (app/boot.lds) */ extern unsigned long _lcdbuf; +#ifdef MROBE_500 extern unsigned long _lcdbuf2; +#endif extern unsigned long _ttbstart; #endif #define TTB_BASE_ADDR (_ttbstart) /* End of memory */ #define FRAME ((short *) (&_lcdbuf)) /* Right after TTB */ +#ifdef MROBE_500 #define FRAME2 ((short *) (&_lcdbuf2)) /* Right after FRAME */ +#endif #define PHY_IO_BASE 0x00030000 #define DM320_REG(addr) (*(volatile unsigned short *)(PHY_IO_BASE + (addr))) diff --git a/firmware/target/arm/tms320dm320/app.lds b/firmware/target/arm/tms320dm320/app.lds index 6ceb512d21..b35ace1ce6 100644 --- a/firmware/target/arm/tms320dm320/app.lds +++ b/firmware/target/arm/tms320dm320/app.lds @@ -14,22 +14,29 @@ STARTUP(target/arm/tms320dm320/crt0.o) #define LCD_NATIVE_HEIGHT LCD_HEIGHT #endif -#define LCD_FUDGE LCD_NATIVE_WIDTH%32 - -#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) - /* must be 16Kb (0x4000) aligned */ #define TTB_SIZE 0x4000 +#define DRAMSIZE (MEMORYSIZE * 0x100000) +#define DRAMORIG CONFIG_SDRAM_START + + +#ifdef MROBE_500 +#define LCD_FUDGE LCD_NATIVE_WIDTH%32 +#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) /* Give this some memory to allow it to align to the MMU boundary. * Note that since there are two buffers (YUV/RGB) it calculates the approximate * memory needed in steps of 1 Meg. */ -#define LCD_TTB_AREA 0x100000*((LCD_BUFFER_SIZE>>19)+1) - -#define DRAMSIZE (MEMORYSIZE * 0x100000) +#define LCD_TTB_AREA (0x100000*((LCD_BUFFER_SIZE>>19)+1)) +#else +#define LCD_BUFFER_SIZE (LCD_NATIVE_WIDTH*LCD_NATIVE_HEIGHT*2) +#define LCD_TTB_AREA (TTB_SIZE + LCD_BUFFER_SIZE) +#endif -#define DRAMORIG CONFIG_SDRAM_START +/* End of the audio buffer, where the codec buffer starts */ +#define ENDAUDIOADDR \ + (DRAMORIG + DRAMSIZE - PLUGIN_BUFFER_SIZE - CODEC_SIZE - LCD_TTB_AREA) #define FLASHORIG 0x00100000 #define FLASHSIZE 0x00800000 @@ -44,10 +51,6 @@ PRO_STACK_SIZE = 0x2000; IRQ_STACK_SIZE = 0x600; FIQ_STACK_SIZE = 0x400; -/* End of the audio buffer, where the codec buffer starts */ -#define ENDAUDIOADDR \ - (DRAMORIG + DRAMSIZE - PLUGIN_BUFFER_SIZE - CODEC_SIZE - LCD_TTB_AREA) - MEMORY { DRAM : ORIGIN = DRAMORIG, LENGTH = DRAMSIZE @@ -105,7 +108,7 @@ SECTIONS *(.rodata*) } > DRAM - .data : + .data : { . = ALIGN(0x4); *(.data*) @@ -142,12 +145,12 @@ SECTIONS } > ITCM /* Program stack space */ - .pro_stack (NOLOAD): + .pro_stack (NOLOAD): { . = ALIGN(0x4); *(.stack) stackbegin = .; /* Variable for thread.c */ - _pro_stack_end = .; + _pro_stack_end = .; . += PRO_STACK_SIZE; _pro_stack_start = .; stackend = .; /* Variable for tread.c */ @@ -193,31 +196,48 @@ SECTIONS pluginbuf = .; . += PLUGIN_BUFFER_SIZE; } > DRAM - + _endsdram = .; +#ifdef MROBE_500 .ttbtable (NOLOAD) : { . = ALIGN (0x4000); _ttbstart = .; . += TTB_SIZE; } > DRAM - + /* The LCD buffer should be at the end of memory to protect against - * overflowing something else when the YUV blitter is fudging the screen + * overflowing something else when the YUV blitter is fudging the screen * size. */ - + .lcdbuffer (NOLOAD) : { _lcdbuf = .; . += LCD_BUFFER_SIZE; } > DRAM - + .lcdbuffer2 (NOLOAD) : { _lcdbuf2 = .; . += LCD_BUFFER_SIZE; } > DRAM +#else + .lcdbuffer (NOLOAD) : + { + . = ALIGN(32); + _lcdbuf = .; + . += LCD_BUFFER_SIZE; + } > DRAM + + /* Place TTB at the end of RAM to minimize alignment losses */ + .ttbtable (NOLOAD) : + { + . = ALIGN (0x4000); + _ttbstart = .; + . += TTB_SIZE; + } > DRAM +#endif } diff --git a/firmware/target/arm/tms320dm320/boot.lds b/firmware/target/arm/tms320dm320/boot.lds index 2db687d533..8b075f43df 100644 --- a/firmware/target/arm/tms320dm320/boot.lds +++ b/firmware/target/arm/tms320dm320/boot.lds @@ -14,22 +14,28 @@ STARTUP(target/arm/tms320dm320/crt0.o) #define LCD_NATIVE_HEIGHT LCD_HEIGHT #endif -#define LCD_FUDGE LCD_NATIVE_WIDTH%32 - -#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) - /* must be 16Kb (0x4000) aligned */ #define TTB_SIZE (0x4000) +/* Bootloader only uses/knows about the upper 32 M */ +#define DRAMSIZE (MEMORYSIZE * 0x100000 / 2) +#define DRAMORIG CONFIG_SDRAM_START+DRAMSIZE + +#ifdef MROBE_500 +#define LCD_FUDGE LCD_NATIVE_WIDTH%32 +#define LCD_BUFFER_SIZE ((LCD_NATIVE_WIDTH+LCD_FUDGE)*LCD_NATIVE_HEIGHT*2) /* Give this some memory to allow it to align to the MMU boundary. * Note that since there are two buffers (YUV/RGB) it calculates the approximate * memory needed in steps of 1 Meg. */ -#define LCD_TTB_AREA 0x100000*((LCD_BUFFER_SIZE>>19)+1) - -/* Bootloader only uses/knows about the upper 32 M */ -#define DRAMORIG CONFIG_SDRAM_START+0x02000000 -#define DRAMSIZE (MEMORYSIZE * 0x80000) +#define LCD_TTB_AREA (0x100000*((LCD_BUFFER_SIZE>>19)+1)) +/* End of the audio buffer, where the codec buffer starts */ +#define TTB_BEGIN (DRAMORIG + DRAMSIZE - LCD_TTB_AREA) +#else +#define LCD_BUFFER_SIZE (LCD_NATIVE_WIDTH*LCD_NATIVE_HEIGHT*2) +#define LCD_TTB_AREA (TTB_SIZE + LCD_BUFFER_SIZE) +#define LCD_BEGIN (DRAMORIG + DRAMSIZE - LCD_TTB_AREA) +#endif #define IRAMORIG 0x00000000 #define IRAMSIZE 0x4000 @@ -59,9 +65,6 @@ PRO_STACK_SIZE = 0x2000; IRQ_STACK_SIZE = 0x400; FIQ_STACK_SIZE = 0x400; -/* End of the audio buffer, where the codec buffer starts */ -#define TTB_BEGIN (DRAMORIG + DRAMSIZE - LCD_TTB_AREA) - MEMORY { DRAM : ORIGIN = DRAMORIG, LENGTH = DRAMSIZE @@ -148,7 +151,7 @@ SECTIONS } > IRAM AT> FLASH _iramcopy = LOADADDR(.iram); - + .ibss (NOLOAD) : { . = ALIGN(0x4); @@ -158,12 +161,12 @@ SECTIONS } > IRAM /* Program stack space */ - .pro_stack (NOLOAD): + .pro_stack (NOLOAD): { . = ALIGN(0x4); *(.stack) stackbegin = .; /* Variable for thread.c */ - _pro_stack_end = .; + _pro_stack_end = .; . += PRO_STACK_SIZE; _pro_stack_start = .; stackend = .; /* Variable for tread.c */ @@ -186,28 +189,45 @@ SECTIONS . += FIQ_STACK_SIZE; _fiq_stack_start = .; } > IRAM - + +#ifdef MROBE_500 .ttbtable TTB_BEGIN (NOLOAD) : { . = ALIGN (0x4000); _ttbstart = .; . += TTB_SIZE; } > DRAM - + /* The LCD buffer should be at the end of memory to protect against - * overflowing something else when the YUV blitter is fudging the screen + * overflowing something else when the YUV blitter is fudging the screen * size. */ - + .lcdbuffer (NOLOAD) : { _lcdbuf = .; . += LCD_BUFFER_SIZE; } > DRAM - + .lcdbuffer2 (NOLOAD) : { _lcdbuf2 = .; . += LCD_BUFFER_SIZE; } > DRAM +#else + .lcdbuffer LCD_BEGIN (NOLOAD) : + { + . = ALIGN(32); + _lcdbuf = .; + . += LCD_BUFFER_SIZE; + } > DRAM + + /* Place TTB at the end of RAM to minimize alignment losses */ + .ttbtable (NOLOAD) : + { + . = ALIGN (0x4000); + _ttbstart = .; + . += TTB_SIZE; + } > DRAM +#endif } -- cgit v1.2.3