From 1ff9ce202dd1868ab1fd5dda727117500e30d82b Mon Sep 17 00:00:00 2001 From: Maurus Cuelenaere Date: Wed, 10 Sep 2008 19:35:15 +0000 Subject: Fix mrobe500 svn:* git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18482 a1c6a512-1295-4272-9138-f99709370657 --- bootloader/mrobe500.c | 564 +++++++++++++++++++++++++------------------------- 1 file changed, 282 insertions(+), 282 deletions(-) mode change 100755 => 100644 bootloader/mrobe500.c diff --git a/bootloader/mrobe500.c b/bootloader/mrobe500.c old mode 100755 new mode 100644 index c71d43d40e..8389d11b4b --- a/bootloader/mrobe500.c +++ b/bootloader/mrobe500.c @@ -1,282 +1,282 @@ -/*************************************************************************** - * __________ __ ___. - * Open \______ \ ____ ____ | | _\_ |__ _______ ___ - * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / - * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < - * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ - * \/ \/ \/ \/ \/ - * $Id: $ - * - * Copyright (C) 2007 by Karl Kurbjun - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY - * KIND, either express or implied. - * - ****************************************************************************/ - -#include "inttypes.h" -#include "string.h" -#include "cpu.h" -#include "system.h" -#include "lcd.h" -#include "kernel.h" -#include "thread.h" -#include "ata.h" -#include "fat.h" -#include "disk.h" -#include "font.h" -#include "adc.h" -#include "backlight.h" -#include "backlight-target.h" -#include "button.h" -#include "panic.h" -#include "power.h" -#include "file.h" -#include "common.h" -#include "rbunicode.h" -#include "usb.h" -#include "spi.h" -#include "uart-target.h" -#include "tsc2100.h" -#include "time.h" -#include "system-arm.h" - -#define MRDEBUG - -#if defined(MRDEBUG) - -extern int line; -#if 0 -struct touch_calibration_point tl, br; - -void touchscreen_get_one_point(struct touch_calibration_point *p) -{ - int data = 0; - int start = current_tick; - while (TIME_AFTER(start+(HZ/3), current_tick)) - { - if (button_read_device()&BUTTON_TOUCHSCREEN) - { - data = button_get_last_touch(); - p->val_x = data>>16; - p->val_y = data&0xffff; - start = current_tick; - } - else if (data == 0) - start = current_tick; - } -} - -#define MARGIN 25 -#define LEN 7 -void touchscreen_calibrate_screen(void) -{ - reset_screen(); - printf("touch the center of the crosshairs to calibrate"); - /* get the topleft value */ - lcd_hline(MARGIN-LEN, MARGIN+LEN, MARGIN); - lcd_vline(MARGIN, MARGIN-LEN, MARGIN+LEN); - lcd_update(); - tl.px_x = MARGIN; tl.px_y = MARGIN; - touchscreen_get_one_point(&tl); - reset_screen(); - printf("touch the center of the crosshairs to calibrate"); - /* get the topright value */ - lcd_hline(LCD_WIDTH-MARGIN-LEN, LCD_WIDTH-MARGIN+LEN, LCD_HEIGHT-MARGIN); - lcd_vline(LCD_WIDTH-MARGIN, LCD_HEIGHT-MARGIN-LEN, LCD_HEIGHT-MARGIN+LEN); - lcd_update(); - br.px_x = LCD_WIDTH-MARGIN; br.px_y = LCD_HEIGHT-MARGIN; - touchscreen_get_one_point(&br); - reset_screen(); - line++; - printf("tl %d %d", tl.val_x, tl.val_y); - printf("br %d %d", br.val_x, br.val_y); - line++; - set_calibration_points(&tl, &br); -} -#endif -static uint8_t bl_command[] = {0xa4, 0x00, 0x00, 0xbb}; -int brightness = 0; - -void mrdebug(void) -{ - int button=0; -#if 0 - use_calibration(false); - touchscreen_calibrate_screen(); - use_calibration(true); -#endif - - while(true) - { -#if 0 - struct tm *t = get_time(); - printf("%d:%d:%d %d %d %d", t->tm_hour, t->tm_min, t->tm_sec, t->tm_mday, t->tm_mon, t->tm_year); - printf("time: %d", mktime(t)); -#endif - button = button_get(false); - if (button == BUTTON_POWER) - { - printf("reset"); - IO_GIO_BITSET1|=1<<10; - } - if (button==BUTTON_RC_VOL_DOWN) - { - brightness = (brightness - 5) & 0x7f; - bl_command[2] = brightness; - spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); - } - else if (button==BUTTON_RC_VOL_UP) - { - brightness = (brightness + 5) & 0x7f; - bl_command[2] = brightness; - spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); - } -// { -// short x,y,z1,z2; -// tsc2100_read_values(&x, &y, &z1, &z2); -// printf("x: %04x y: %04x z1: %04x z2: %04x", x, y, z1, z2); -// printf("tsadc: %4x", tsc2100_readreg(TSADC_PAGE, TSADC_ADDRESS)&0xffff); -// // tsc2100_keyclick(); /* doesnt work :( */ -// line -= 6; -// } - else if (button == BUTTON_RC_HEART) - { - printf("POINT"); - touchscreen_set_mode(TOUCHSCREEN_POINT); - } - else if (button == BUTTON_RC_MODE) - { - printf("BUTTON"); - touchscreen_set_mode(TOUCHSCREEN_BUTTON); - } -#if 1 - else if (button&BUTTON_TOUCHSCREEN) - { - if (button&BUTTON_REL) - continue; - unsigned int data = button_get_data(); - int x = (data&0xffff0000)>>16, y = data&0x0000ffff; - reset_screen(); - line = 9; - printf("BB: %x %d %d", button, x,y); - lcd_hline(x-5, x+5, y); - lcd_vline(x, y-5, y+5); - lcd_update(); - } - else if (button == BUTTON_RC_PLAY) - { - reset_screen(); - } - - else if (button) - { - // if (button&BUTTON_REL) - { - printf("%08x %s\n", button, (button&BUTTON_REL)?"yes":"no"); - } - } - -#endif - } -} -#endif - -void main(void) -{ - unsigned char* loadbuffer; - int buffer_size; - int rc; - int(*kernel_entry)(void); - - power_init(); - lcd_init(); - system_init(); - kernel_init(); - - enable_irq(); - enable_fiq(); - - adc_init(); - button_init(); - backlight_init(); - - font_init(); - - lcd_setfont(FONT_SYSFIXED); - - /* Show debug messages if button is pressed */ -// if(button_read_device()) - verbose = true; - - printf("Rockbox boot loader"); - printf("Version %s", APPSVERSION); - - usb_init(); - - /* Enter USB mode without USB thread */ - if(usb_detect() == USB_INSERTED) - { - const char msg[] = "Bootloader USB mode"; - reset_screen(); - lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2, - (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg); - lcd_update(); - - ide_power_enable(true); - ata_enable(false); - sleep(HZ/20); - usb_enable(true); - - while (usb_detect() == USB_INSERTED) - { - ata_spin(); /* Prevent the drive from spinning down */ - sleep(HZ); - } - - usb_enable(false); - - reset_screen(); - lcd_update(); - } -#if defined(MRDEBUG) - mrdebug(); -#endif - printf("ATA"); - rc = ata_init(); - if(rc) - { - reset_screen(); - error(EATA, rc); - } - - printf("disk"); - disk_init(); - - printf("mount"); - rc = disk_mount_all(); - if (rc<=0) - { - error(EDISK,rc); - } - - printf("Loading firmware"); - - loadbuffer = (unsigned char*) 0x00900000; - buffer_size = (unsigned char*)0x01900000 - loadbuffer; - - rc = load_firmware(loadbuffer, BOOTFILE, buffer_size); - if(rc < 0) - error(EBOOTFILE, rc); - - if (rc == EOK) - { - kernel_entry = (void*) loadbuffer; - rc = kernel_entry(); - } -} +/*************************************************************************** + * __________ __ ___. + * Open \______ \ ____ ____ | | _\_ |__ _______ ___ + * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / + * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < + * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ + * \/ \/ \/ \/ \/ + * $Id$ + * + * Copyright (C) 2007 by Karl Kurbjun + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ****************************************************************************/ + +#include "inttypes.h" +#include "string.h" +#include "cpu.h" +#include "system.h" +#include "lcd.h" +#include "kernel.h" +#include "thread.h" +#include "ata.h" +#include "fat.h" +#include "disk.h" +#include "font.h" +#include "adc.h" +#include "backlight.h" +#include "backlight-target.h" +#include "button.h" +#include "panic.h" +#include "power.h" +#include "file.h" +#include "common.h" +#include "rbunicode.h" +#include "usb.h" +#include "spi.h" +#include "uart-target.h" +#include "tsc2100.h" +#include "time.h" +#include "system-arm.h" + +#define MRDEBUG + +#if defined(MRDEBUG) + +extern int line; +#if 0 +struct touch_calibration_point tl, br; + +void touchscreen_get_one_point(struct touch_calibration_point *p) +{ + int data = 0; + int start = current_tick; + while (TIME_AFTER(start+(HZ/3), current_tick)) + { + if (button_read_device()&BUTTON_TOUCHSCREEN) + { + data = button_get_last_touch(); + p->val_x = data>>16; + p->val_y = data&0xffff; + start = current_tick; + } + else if (data == 0) + start = current_tick; + } +} + +#define MARGIN 25 +#define LEN 7 +void touchscreen_calibrate_screen(void) +{ + reset_screen(); + printf("touch the center of the crosshairs to calibrate"); + /* get the topleft value */ + lcd_hline(MARGIN-LEN, MARGIN+LEN, MARGIN); + lcd_vline(MARGIN, MARGIN-LEN, MARGIN+LEN); + lcd_update(); + tl.px_x = MARGIN; tl.px_y = MARGIN; + touchscreen_get_one_point(&tl); + reset_screen(); + printf("touch the center of the crosshairs to calibrate"); + /* get the topright value */ + lcd_hline(LCD_WIDTH-MARGIN-LEN, LCD_WIDTH-MARGIN+LEN, LCD_HEIGHT-MARGIN); + lcd_vline(LCD_WIDTH-MARGIN, LCD_HEIGHT-MARGIN-LEN, LCD_HEIGHT-MARGIN+LEN); + lcd_update(); + br.px_x = LCD_WIDTH-MARGIN; br.px_y = LCD_HEIGHT-MARGIN; + touchscreen_get_one_point(&br); + reset_screen(); + line++; + printf("tl %d %d", tl.val_x, tl.val_y); + printf("br %d %d", br.val_x, br.val_y); + line++; + set_calibration_points(&tl, &br); +} +#endif +static uint8_t bl_command[] = {0xa4, 0x00, 0x00, 0xbb}; +int brightness = 0; + +void mrdebug(void) +{ + int button=0; +#if 0 + use_calibration(false); + touchscreen_calibrate_screen(); + use_calibration(true); +#endif + + while(true) + { +#if 0 + struct tm *t = get_time(); + printf("%d:%d:%d %d %d %d", t->tm_hour, t->tm_min, t->tm_sec, t->tm_mday, t->tm_mon, t->tm_year); + printf("time: %d", mktime(t)); +#endif + button = button_get(false); + if (button == BUTTON_POWER) + { + printf("reset"); + IO_GIO_BITSET1|=1<<10; + } + if (button==BUTTON_RC_VOL_DOWN) + { + brightness = (brightness - 5) & 0x7f; + bl_command[2] = brightness; + spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); + } + else if (button==BUTTON_RC_VOL_UP) + { + brightness = (brightness + 5) & 0x7f; + bl_command[2] = brightness; + spi_block_transfer(SPI_target_BACKLIGHT, bl_command, 4, 0, 0); + } +// { +// short x,y,z1,z2; +// tsc2100_read_values(&x, &y, &z1, &z2); +// printf("x: %04x y: %04x z1: %04x z2: %04x", x, y, z1, z2); +// printf("tsadc: %4x", tsc2100_readreg(TSADC_PAGE, TSADC_ADDRESS)&0xffff); +// // tsc2100_keyclick(); /* doesnt work :( */ +// line -= 6; +// } + else if (button == BUTTON_RC_HEART) + { + printf("POINT"); + touchscreen_set_mode(TOUCHSCREEN_POINT); + } + else if (button == BUTTON_RC_MODE) + { + printf("BUTTON"); + touchscreen_set_mode(TOUCHSCREEN_BUTTON); + } +#if 1 + else if (button&BUTTON_TOUCHSCREEN) + { + if (button&BUTTON_REL) + continue; + unsigned int data = button_get_data(); + int x = (data&0xffff0000)>>16, y = data&0x0000ffff; + reset_screen(); + line = 9; + printf("BB: %x %d %d", button, x,y); + lcd_hline(x-5, x+5, y); + lcd_vline(x, y-5, y+5); + lcd_update(); + } + else if (button == BUTTON_RC_PLAY) + { + reset_screen(); + } + + else if (button) + { + // if (button&BUTTON_REL) + { + printf("%08x %s\n", button, (button&BUTTON_REL)?"yes":"no"); + } + } + +#endif + } +} +#endif + +void main(void) +{ + unsigned char* loadbuffer; + int buffer_size; + int rc; + int(*kernel_entry)(void); + + power_init(); + lcd_init(); + system_init(); + kernel_init(); + + enable_irq(); + enable_fiq(); + + adc_init(); + button_init(); + backlight_init(); + + font_init(); + + lcd_setfont(FONT_SYSFIXED); + + /* Show debug messages if button is pressed */ +// if(button_read_device()) + verbose = true; + + printf("Rockbox boot loader"); + printf("Version %s", APPSVERSION); + + usb_init(); + + /* Enter USB mode without USB thread */ + if(usb_detect() == USB_INSERTED) + { + const char msg[] = "Bootloader USB mode"; + reset_screen(); + lcd_putsxy( (LCD_WIDTH - (SYSFONT_WIDTH * strlen(msg))) / 2, + (LCD_HEIGHT - SYSFONT_HEIGHT) / 2, msg); + lcd_update(); + + ide_power_enable(true); + ata_enable(false); + sleep(HZ/20); + usb_enable(true); + + while (usb_detect() == USB_INSERTED) + { + ata_spin(); /* Prevent the drive from spinning down */ + sleep(HZ); + } + + usb_enable(false); + + reset_screen(); + lcd_update(); + } +#if defined(MRDEBUG) + mrdebug(); +#endif + printf("ATA"); + rc = ata_init(); + if(rc) + { + reset_screen(); + error(EATA, rc); + } + + printf("disk"); + disk_init(); + + printf("mount"); + rc = disk_mount_all(); + if (rc<=0) + { + error(EDISK,rc); + } + + printf("Loading firmware"); + + loadbuffer = (unsigned char*) 0x00900000; + buffer_size = (unsigned char*)0x01900000 - loadbuffer; + + rc = load_firmware(loadbuffer, BOOTFILE, buffer_size); + if(rc < 0) + error(EBOOTFILE, rc); + + if (rc == EOK) + { + kernel_entry = (void*) loadbuffer; + rc = kernel_entry(); + } +} -- cgit v1.2.3