diff options
Diffstat (limited to 'www/mods/disassemble.t')
-rw-r--r-- | www/mods/disassemble.t | 30 |
1 files changed, 30 insertions, 0 deletions
diff --git a/www/mods/disassemble.t b/www/mods/disassemble.t new file mode 100644 index 0000000000..7b50f18bca --- /dev/null +++ b/www/mods/disassemble.t | |||
@@ -0,0 +1,30 @@ | |||
1 | #define _PAGE_ Disassembling the Archos | ||
2 | #include "head.t" | ||
3 | |||
4 | <p>There are several ways to disassemble the Archos Jukeboxes. | ||
5 | Here is an approach where you don't need to bend any metal parts. | ||
6 | |||
7 | |||
8 | <p><img src="b10.jpg"> | ||
9 | <br> | ||
10 | First, remove the battery covers and unscrew all 8 visible screws: 2 torx screws on the left and right sides, and 2 small philips head screws on the top and bottom. Then you simply lift off the plastic top cover. | ||
11 | <hr> | ||
12 | |||
13 | <p><img src="b5.jpg"> <img src="b6.jpg"> | ||
14 | <br> | ||
15 | Use your thumb nails to compress the thin edge of the rubber while gently pulling the metal plate over it. | ||
16 | <hr> | ||
17 | |||
18 | <p><img src="b7.jpg"> <img src="b8.jpg"> | ||
19 | <br> | ||
20 | Do the same on the side. | ||
21 | <hr> | ||
22 | |||
23 | <p><img src="b9.jpg"> | ||
24 | <br> | ||
25 | You have liberated one end of the Archos from the metal back plate! | ||
26 | Now lightly lift the blue rubber bumbers up from the circuit board on the other end, then slide the Archos out of the back plate. | ||
27 | |||
28 | <p><i>Björn</i> | ||
29 | |||
30 | #include "foot.t" | ||