diff options
Diffstat (limited to 'manual')
-rw-r--r-- | manual/advanced_topics/main.tex | 2 | ||||
-rw-r--r-- | manual/appendix/appendix.tex | 2 | ||||
-rw-r--r-- | manual/configure_rockbox/main.tex | 742 | ||||
-rw-r--r-- | manual/rockbox_interface/main.tex | 3 |
4 files changed, 284 insertions, 465 deletions
diff --git a/manual/advanced_topics/main.tex b/manual/advanced_topics/main.tex index d92c7b3c99..43bca0a1b9 100644 --- a/manual/advanced_topics/main.tex +++ b/manual/advanced_topics/main.tex | |||
@@ -4,7 +4,7 @@ | |||
4 | \subsection{\label{ref:GettingExtras}Getting Extras (Fonts,Languages)} | 4 | \subsection{\label{ref:GettingExtras}Getting Extras (Fonts,Languages)} |
5 | Rockbox supports custom fonts (for the Recorder and Ondio only) and a number of different languages. Rockbox comes with several fonts and languages already included. If new fonts and language files have been created, then they will be found at \url{http://www.rockbox.org/fonts/} and \url{http://www.rockbox.org/lang/}. | 5 | Rockbox supports custom fonts (for the Recorder and Ondio only) and a number of different languages. Rockbox comes with several fonts and languages already included. If new fonts and language files have been created, then they will be found at \url{http://www.rockbox.org/fonts/} and \url{http://www.rockbox.org/lang/}. |
6 | 6 | ||
7 | \subsection{\label{ref:LoadingForts}Loading Fonts (Recorder, Ondio)} | 7 | \subsection{\label{ref:Loadingfonts}Loading Fonts (Recorder, Ondio)} |
8 | Rockbox can load fonts dynamically. Simply copy the .fnt file to the \dap\ and ``play'' them in the directory browser or select \textbf{General Settings {\textgreater} Fonts} from the Main Menu . | 8 | Rockbox can load fonts dynamically. Simply copy the .fnt file to the \dap\ and ``play'' them in the directory browser or select \textbf{General Settings {\textgreater} Fonts} from the Main Menu . |
9 | 9 | ||
10 | If you want a font to be loaded automatically every time you start up, | 10 | If you want a font to be loaded automatically every time you start up, |
diff --git a/manual/appendix/appendix.tex b/manual/appendix/appendix.tex index 63165e823f..b0d1211587 100644 --- a/manual/appendix/appendix.tex +++ b/manual/appendix/appendix.tex | |||
@@ -1,6 +1,6 @@ | |||
1 | \appendix | 1 | \appendix |
2 | \chapter{File formats} | 2 | \chapter{File formats} |
3 | \section{Supported file formats} | 3 | \section{\label{ref:Supportedfileformats}Supported file formats} |
4 | \begin{center} | 4 | \begin{center} |
5 | \begin{tabular}{lll}\toprule | 5 | \begin{tabular}{lll}\toprule |
6 | \textbf{Icon} & \textbf{File Type} & \textbf{Action} \\\midrule | 6 | \textbf{Icon} & \textbf{File Type} & \textbf{Action} \\\midrule |
diff --git a/manual/configure_rockbox/main.tex b/manual/configure_rockbox/main.tex index 36aac5eb8e..f464ee2679 100644 --- a/manual/configure_rockbox/main.tex +++ b/manual/configure_rockbox/main.tex | |||
@@ -16,7 +16,7 @@ This menu offers a selection of sound properties you may change to improve your | |||
16 | \item \textbf{Bass} | 16 | \item \textbf{Bass} |
17 | This emphasises or suppresses the lower (bass) sounds in the track. 0 means that bass sounds are unaltered (flat response). | 17 | This emphasises or suppresses the lower (bass) sounds in the track. 0 means that bass sounds are unaltered (flat response). |
18 | \item \textbf{Treble} | 18 | \item \textbf{Treble} |
19 | This emphasises or suppresses the higher (treble) sounds in the track. 0 means that treble sounds are unaltered (flat response). | 19 | This emphasises or suppresses the higher (treble) sounds in the track. 0 means that treble sounds are unaltered (flat response). |
20 | \item \textbf{Balance} | 20 | \item \textbf{Balance} |
21 | How much of the volume is generated by the left or right channel of the sound. The default, 0, means that the left and right outputs are equal in volume. Negative numbers increase the volume of the left channel relative to the right, positive numbers increase the volume of the right channel relative to the left. | 21 | How much of the volume is generated by the left or right channel of the sound. The default, 0, means that the left and right outputs are equal in volume. Negative numbers increase the volume of the left channel relative to the right, positive numbers increase the volume of the right channel relative to the left. |
22 | \item \textbf{Channels} | 22 | \item \textbf{Channels} |
@@ -42,537 +42,357 @@ This emphasises or suppresses the higher (treble) sounds in the track. 0 means | |||
42 | \end{itemize} | 42 | \end{itemize} |
43 | } | 43 | } |
44 | \opt{h1xx,h300,ipodnano,ipodcolor,ipodvideo}{TODO write for sw-platform} | 44 | \opt{h1xx,h300,ipodnano,ipodcolor,ipodvideo}{TODO write for sw-platform} |
45 | |||
46 | \opt{recorder,recorderv2fm}{ | ||
47 | \item \textbf{Loudness} | ||
48 | Loudness is an effect which emphasises bass and treble. This makes the track seem louder by amplifying the frequencies that the human ear finds hard to hear. Frequencies in the vocal range are unaffected, since the human ear picks these up very easily. | ||
49 | } | ||
50 | |||
51 | \opt{recorder,recorderv2fm}{ | ||
52 | \item \textbf{Auto Volume} | ||
53 | Auto volume is a feature that automatically lowers the volume on loud parts, and then slowly restores the volume to the previous level over a time interval. That time interval is configurable here. Short values like 20ms are useful for ensuring a constant volume for in car use and other applications where background noise makes a constant loudness desirable. A longer timeout means that the change in volume back to the previous level will be smoother, so there will be less sharp changes in volume level. | ||
54 | } | ||
55 | |||
56 | \opt{recorder,recorderv2fm}{ | ||
57 | \item \textbf{Super Bass} | ||
58 | This setting changes the threshold at which bass frequencies are affected by the \textbf{Loudness} setting, making the sound of drums and bass guitar louder in comparison to the rest of the track. This setting only has an effect if \textbf{Loudness} is set to a value larger than 0dB. | ||
59 | } | ||
60 | |||
61 | \opt{recorder,recorderv2fm}{ | ||
62 | \item \textbf{MDB {}- Micronas Dynamic Bass} | ||
63 | The rest of the parameters on this menu relate to the Micronas Dynamic Bass (MDB) function. This is designed to enable the user to hear bass notes that the headphones and/or speakers are not capable of reproducing. Every tone has a fundamental frequency (the ``main tone'') and also several harmonics, which are related to that tone. The human brain has a mechanism whereby it can actually infer the presence of bass notes from the higher harmonics that they would generate.\\ | ||
45 | 64 | ||
46 | \opt{recorder,recorderv2fm}{ | 65 | The practical upshot of this is that MDB produces a more authentic sounding bass by tricking the brain in believing it's hearing tones that the headphones or speakers aren't capable of reproducing. Try it and see what you think.\\ |
47 | \item \textbf{Loudness} | ||
48 | Loudness is an effect which emphasises bass and treble. This makes the | ||
49 | track seem louder by amplifying the frequencies that the human ear | ||
50 | finds hard to hear. Frequencies in the vocal range are unaffected, | ||
51 | since the human ear picks these up very easily. | ||
52 | } | ||
53 | |||
54 | \opt{recorder,recorderv2fm}{ | ||
55 | \item \textbf{Auto Volume} | ||
56 | Auto volume is a feature that automatically lowers the volume on loud | ||
57 | parts, and then slowly restores the volume to the previous level over a | ||
58 | time interval. That time interval is configurable here. Short values | ||
59 | like 20ms are useful for ensuring a constant volume for in car use and | ||
60 | other applications where background noise makes a constant loudness | ||
61 | desirable. A longer timeout means that the change in volume back to | ||
62 | the previous level will be smoother, so there will be less sharp | ||
63 | changes in volume level. | ||
64 | } | ||
65 | |||
66 | \opt{recorder,recorderv2fm}{ | ||
67 | \item \textbf{Super Bass} | ||
68 | This setting changes the threshold at which bass frequencies are | ||
69 | affected by the \textbf{Loudness} setting, making the sound of drums | ||
70 | and bass guitar louder in comparison to the rest of the track. This | ||
71 | setting only has an effect if \textbf{Loudness} is set to a value | ||
72 | larger than 0dB. | ||
73 | } | ||
74 | |||
75 | \opt{recorder,recorderv2fm}{ | ||
76 | \item \textbf{MDB {}- Micronas Dynamic Bass} | ||
77 | The rest of the parameters on this menu relate to the Micronas Dynamic | ||
78 | Bass (MDB) function. This is designed to enable the user to hear bass | ||
79 | notes that the headphones and/or speakers are not capable of | ||
80 | reproducing. Every tone has a fundamental frequency (the ``main tone'') and also several harmonics, which are related to that tone. The human brain has a | ||
81 | mechanism whereby it can actually infer the presence of bass notes from | ||
82 | the higher harmonics that they would generate.\\ | ||
83 | |||
84 | The practical upshot of this is that MDB produces a more authentic | ||
85 | sounding bass by tricking the brain in believing it's | ||
86 | hearing tones that the headphones or speakers aren't | ||
87 | capable of reproducing. Try it and see what you think.\\ | ||
88 | |||
89 | The MDB parameters are as follows. | ||
90 | |||
91 | \begin{itemize} | ||
92 | \item \textbf{MDB enable: } This turns the MDB feature on or off. For many | ||
93 | users this will be the only setting they need, since Rockbox picks | ||
94 | sensible defaults for the other parameters. MDB is turned off by | ||
95 | default. | ||
96 | \item \textbf{MDB strength:} How loud the harmonics generated by the MDB will | ||
97 | be. | ||
98 | \item \textbf{MDB Harmonics}: The percentage of the low notes that is | ||
99 | converted into harmonics. If low notes are causing speaker distortion, | ||
100 | this can be set to 100\% to eliminate the fundamental completely and | ||
101 | only produce harmonics in the signal. If set to 0\% this is the same | ||
102 | as turning the MDB feature off. | ||
103 | \item \textbf{MDB Centre Frequency: }The cutoff frequency of your headphones or speakers. This is usually given in the specification for the headphones/speakers. | ||
104 | \item \textbf{MDB shape: }It is recommended that this parameter be set to 1.5 | ||
105 | times the centre frequency.\\ | ||
106 | |||
107 | This is the frequency up to which harmonics are generated. Some of the | ||
108 | lower fundamentals near the cut{}-off range | ||
109 | will have their lower harmonics cut off, since they will be below the | ||
110 | range of the speakers. Fundamentals between the | ||
111 | cut{}-off frequency and the lower frequency will have their harmonics proportionally boosted to compensate and restore the 'loudness' of these | ||
112 | notes.\\ | ||
113 | |||
114 | For most users, the defaults should provide an improvement in sound | ||
115 | quality and can be safely left as they are. For reference, the | ||
116 | defaults Rockbox uses are: | ||
117 | |||
118 | \begin{table}[h!] | ||
119 | \begin{center} | ||
120 | \begin{tabular}{@{}lc@{}}\toprule | ||
121 | Setting & Value \\\midrule | ||
122 | MDB Strength & 50dB \\ | ||
123 | MDB Harmonics & 48\% \\ | ||
124 | MDB Centre Frequency & 60Hz \\ | ||
125 | MDB Shape & 90Hz \\\bottomrule | ||
126 | \end{tabular} | ||
127 | \end{center} | ||
128 | \end{table} | ||
129 | 66 | ||
130 | \end{itemize} | 67 | The MDB parameters are as follows. |
131 | } | 68 | |
69 | \begin{itemize} | ||
70 | \item \textbf{MDB enable: } | ||
71 | This turns the MDB feature on or off. For many users this will be the only setting they need, since Rockbox picks sensible defaults for the other parameters. MDB is turned off by default. | ||
72 | \item \textbf{MDB strength:} | ||
73 | How loud the harmonics generated by the MDB will be. | ||
74 | \item \textbf{MDB Harmonics:} | ||
75 | The percentage of the low notes that is converted into harmonics. If low notes are causing speaker distortion, this can be set to 100\% to eliminate the fundamental completely and only produce harmonics in the signal. If set to 0\% this is the same as turning the MDB feature off. | ||
76 | \item \textbf{MDB Centre Frequency: }The cutoff frequency of your headphones or speakers. This is usually given in the specification for the headphones/speakers. | ||
77 | \item \textbf{MDB shape: }It is recommended that this parameter be set to 1.5 times the centre frequency.\\ | ||
78 | |||
79 | This is the frequency up to which harmonics are generated. Some of the lower fundamentals near the cut{}-off range will have their lower harmonics cut off, since they will be below the range of the speakers. Fundamentals between the cut{}-off frequency and the lower frequency will have their harmonics proportionally boosted to compensate and restore the 'loudness' of these notes.\\ | ||
80 | |||
81 | For most users, the defaults should provide an improvement in sound quality and can be safely left as they are. For reference, the defaults Rockbox uses are: | ||
82 | |||
83 | \begin{table}[h!] | ||
84 | \begin{center} | ||
85 | \begin{tabular}{@{}lc@{}}\toprule | ||
86 | Setting & Value \\\midrule | ||
87 | MDB Strength & 50dB \\ | ||
88 | MDB Harmonics & 48\% \\ | ||
89 | MDB Centre Frequency & 60Hz \\ | ||
90 | MDB Shape & 90Hz \\\bottomrule | ||
91 | \end{tabular} | ||
92 | \end{center} | ||
93 | \end{table} | ||
94 | |||
95 | \end{itemize} | ||
96 | } | ||
132 | \end{itemize} | 97 | \end{itemize} |
133 | 98 | ||
134 | 99 | ||
135 | \section{\label{ref:GeneralSettings}General Settings} | 100 | \section{\label{ref:GeneralSettings}General Settings} |
136 | {\centering\mdseries\itshape | 101 | \begin{center} |
137 | [Warning: Image ignored] % Unhandled or unsupported graphics: | 102 | \includegraphics[width=4cm]{configure_rockbox/images/ss-general-settings-\genericimg.png} |
138 | %\includegraphics[width=3.822cm,height=2.184cm]{images/rockbox-manual-img34.png} | 103 | \end{center} |
139 | [Warning: Image ignored] % Unhandled or unsupported graphics: | 104 | |
140 | %\includegraphics[width=4.667cm,height=1.963cm]{images/rockbox-manual-img35.png} | 105 | \subsection{\label{ref:PlaybackOptions}Playback Options} |
141 | \newline | 106 | This menu is for configuring settings related to audio playback |
142 | Recorder general settings Player general settings | ||
143 | \par} | ||
144 | |||
145 | \subsubsection{\label{ref:PlaybackOptions}Playback Options} | ||
146 | This menu is for configuring settings related to MP3 playback | ||
147 | 107 | ||
148 | \begin{itemize} | 108 | \begin{itemize} |
149 | \item \textbf{Shuffle} | 109 | \item \textbf{Shuffle} |
150 | Select shuffle ON/OFF. This alters how Rockbox will select which next | 110 | Select shuffle ON/OFF. This alters how Rockbox will select which next song to play. |
151 | song to play. | ||
152 | \item \textbf{Repeat} | 111 | \item \textbf{Repeat} |
153 | Repeat modes are Off/One/All. ``Off'' means no | 112 | Repeat modes are Off/One/All. ``Off'' means no repeat. ``One'' means repeat one track over and over. ``All'' means repeat playlist/directory. |
154 | repeat. ``One'' means repeat one track over | 113 | \item \textbf{Play Selected First} |
155 | and over. ``All'' means repeat playlist/directory. | 114 | This setting controls what happens when you press PLAY on a file in a directory and shuffle mode is on. If this setting is Yes, the file you selected will be played first. If this setting is No, a random file in the directory will be played first. |
156 | \item \item{Play Selected First } | ||
157 | This setting controls what happens when you press PLAY on a file in a | ||
158 | directory and shuffle mode is on. If this setting is Yes, the file you | ||
159 | selected will be played first. If this setting is No, a random file in | ||
160 | the directory will be played first. | ||
161 | \item \textbf{Resume} | 115 | \item \textbf{Resume} |
162 | Sets whether Rockbox will resume playing at the point where you shut | 116 | Sets whether Rockbox will resume playing at the point where you shut off. Options are: Ask/Yes/No/Ask once. ``Ask'' means it will ask at boot time. ``Yes'' means it will unconditionally try to resume. ``No'' means it will not resume. ``Ask once'' will erase the resume info if you answer no, and thus not ask you again. |
163 | off. Options are: Ask/Yes/No/Ask once. | ||
164 | ``Ask'' means it will ask at boot time. ``Yes'' means it will unconditionally try to resume. ``No'' means it will not resume. ``Ask once'' will erase the resume info if you answer no, and thus not ask you again. | ||
165 | \item \textbf{FFwd / Rewind} | 117 | \item \textbf{FFwd / Rewind} |
166 | Two options are available at this point | 118 | The options available at this point are: |
167 | 119 | \begin{enumerate} | |
168 | \begin{itemize} | 120 | \item \textbf{FF/RW Min Step} |
169 | \item \textbf{FF/RW Min Step} | 121 | The smallest step, in seconds, you want to fast forward or rewind in a |
170 | The smallest step, in seconds, you want to fast forward or rewind in a | 122 | track. |
171 | track. | 123 | \item \textbf{FF/RW Accel} |
172 | \item \textbf{FF/RW Accel} | 124 | How fast you want search (ffwd/rew) to accelerate when you hold |
173 | How fast you want search (ffwd/rew) to accelerate when you hold | 125 | down the button. ``Off'' means no acceleration. ``2x/1s'' means double the |
174 | down the button. ``Off'' means no acceleration. ``2x/1s'' means double the | 126 | search speed once every second the button is held. ``2x/5s'' means double the search speed once every 5 seconds the button is held. |
175 | search speed once every second the button is held. ``2x/5s'' means double the search speed once every 5 seconds the button is held. | 127 | \end{enumerate} |
176 | \end{itemize} | 128 | |
177 | |||
178 | \item \textbf{Anti{}-skip Buffer} | 129 | \item \textbf{Anti{}-skip Buffer} |
179 | This setting is really ``extra anti{}-skip''. It lets you set | 130 | This setting is really ``extra anti{}-skip''. It lets you set a timer for how many seconds earlier than normally necessary the disk should spin up and start reading data. You don't need this unless you shake and bump the unit a lot. Spinning up the disk earlier than necessary naturally drains the batteries a little extra. Most users will not need this setting. |
180 | a timer for how many seconds earlier than normally necessary the disk | ||
181 | should spin up and start reading data. You don't need | ||
182 | this unless you shake and bump the unit a lot. Spinning up the disk | ||
183 | earlier than necessary naturally drains the batteries a little extra. | ||
184 | Most users will not need this setting. | ||
185 | 131 | ||
186 | \item \textbf{Fade on Stop/Pause} | 132 | \item \textbf{Fade on Stop/Pause} |
187 | This setting enables and disables a fade effect when you pause | 133 | This setting enables and disables a fade effect when you pause or stop playing a song. Fade is a progressive increase or reduction of volume, from your set volume to 0, and vice versa. |
188 | or stop playing a song. Fade is a progressive increase or reduction of | ||
189 | volume, from your set volume to 0, and vice versa. | ||
190 | 134 | ||
191 | \item \textbf{ID3 tag priority} | 135 | \item \textbf{ID3 tag priority} |
192 | ID3 tags in an MP3 file contain information about the artist, title, | 136 | ID3 tags in an MP3 file contain information about the artist, title, album etc. of the track. This option controls whether Rockbox uses the information from ID3v2 tags in preference to that from ID3v1 tags when both types of tag are present. |
193 | album etc. of the track. This option controls whether Rockbox uses the information from ID3v2 tags in preference to that from ID3v1 tags when both types of tag are present. | ||
194 | \end{itemize} | 137 | \end{itemize} |
195 | 138 | ||
196 | \subsection{File View} | 139 | \subsection{File View} |
197 | This menu deals with options relating to how the file browser displays | 140 | This menu deals with options relating to how the file browser displays files |
198 | files | ||
199 | 141 | ||
200 | \begin{itemize} | 142 | \begin{itemize} |
201 | \item \textbf{Sort Case Sensitive} | 143 | \item \textbf{Sort Case Sensitive} |
202 | If this option is enabled files that start with a | 144 | If this option is enabled files that start with a lower case letter will appear after the files that start with an upper case letter have all been listed If disabled, then case will be ignored when sorting files. |
203 | lower case letter will appear after the files that start with an upper case letter have all been listed If disabled, then case will be ignored when sorting files. | ||
204 | \item \textbf{Sort Directories} | 145 | \item \textbf{Sort Directories} |
205 | This option controls how Rockbox sorts folders. The default is to sort | 146 | This option controls how Rockbox sorts folders. The default is to sort them alphabetically. ``By date'' sorts them with the oldest folder first. ``By newest date'' sorts them with the newest folder first. |
206 | them alphabetically. ``By date'' sorts them with the oldest folder | 147 | |
207 | first. ``By newest date'' sorts them with the newest folder first. | ||
208 | |||
209 | \item \textbf{Sort Files} | 148 | \item \textbf{Sort Files} |
210 | This option controls how Rockbox sorts files. In addition to the | 149 | This option controls how Rockbox sorts files. In addition to the options for directory sorting above, there is a ``By type'' option which sorts files alphabetically by their type (such as .mp3) then alphabetically within each type. |
211 | options for directory sorting above, there is a ``By type'' option | ||
212 | which sorts files alphabetically by their type (such as .mp3) then | ||
213 | alphabetically within each type. | ||
214 | 150 | ||
215 | \item \textbf{\label{ref:ShowFiles}Show Files} | 151 | \item \textbf{\label{ref:ShowFiles}Show Files} |
216 | Controls which files are displayed in the directory browser: | 152 | Controls which files are displayed in the directory browser: |
217 | 153 | ||
218 | \begin{itemize} | 154 | \begin{itemize} |
219 | \item \textbf{Music: } | 155 | \item \textbf{Music: } |
220 | Only directories, .mp3, .mp2, .mpa and .m3u files | 156 | Only directories, .m3u files and the supported \emph{audio} fileformats are shown. Extensions are strippe'd. Files anddirectories starting with . Or with the ``hidden'' flag set are hidden. |
221 | are shown. Extensions are strippe'd. Files anddirectories starting with . Or with the ``hidden'' flag set are hidden. | 157 | \item \textbf{Playlists:} |
222 | \item \textbf{Playlists:} | 158 | Only shows directories and playlists, for simplified navigation. |
223 | Only shows directories and playlists, for | 159 | \item \textbf{Supported:} |
224 | simplified navigation. | 160 | All directories and files Rockbox understands (see page \pageref{ref:Supportedfileformats}) are shown. Files and directories starting with . or with the ``hidden'' flag set are hidden. |
225 | \item \textbf{Supported:} | 161 | \item \textbf{All:} |
226 | All directories and files Rockbox understands (see page \pageref{ref:Supportedfileformats}) are shown. Files and directories starting with . or with the | 162 | All files and directories are shown. Extensions are shown. No files or directories arehidden |
227 | ``hidden'' flag set are hidden. | 163 | \end{itemize} |
228 | \item \textbf{All:} | 164 | |
229 | All files and directories are shown. Extensions are shown. No files or | ||
230 | directories arehidden | ||
231 | \end{itemize} | ||
232 | |||
233 | \item \textbf{Follow Playlist} | 165 | \item \textbf{Follow Playlist} |
234 | If Follow Playlist is set to ``Yes'', you will find yourself in the same | 166 | If Follow Playlist is set to ``Yes'', you will find yourself in the same directory as the currently playing file if you go to the Directory Browser from the WPS. If set to ``No'', you will stay in the same directory as you were last in. |
235 | directory as the currently playing file if you go to the Directory | ||
236 | Browser from the WPS. If set to ``No'', you will stay in the same directory as you were last in. | ||
237 | 167 | ||
238 | \item \textbf{Show Icons} | 168 | \item \textbf{Show Icons} |
239 | This indicates whether Rockbox will display an icon representing what | 169 | This indicates whether Rockbox will display an icon representing what type a file is on the left of the file in the browser. For details of these icons, please see page \pageref{ref:Supportedfileformats}. |
240 | type a file is on the left of the file in the browser. For details of | ||
241 | these icons, please see page \pageref{ref:Supportedfileformats}. | ||
242 | \end{itemize} | 170 | \end{itemize} |
243 | 171 | ||
244 | \subsection{\label{ref:Displayoptions}Display Options} | 172 | \subsection{\label{ref:Displayoptions}Display Options} |
245 | 173 | ||
246 | \begin{itemize} | 174 | \begin{itemize} |
247 | \item \textbf{Browse fonts} | 175 | \item \textbf{Browse fonts} |
248 | Browse the fonts that reside in your \textbf{/.rockbox} directory. | 176 | Browse the fonts that reside in your \fname{/.rockbox} directory. Selecting one will activate it. See page \pageref{ref:Loadingfonts} for further details about fonts. |
249 | Selecting one will activate it. See page \pageref{ref:Loadingfonts} for further details about fonts. | 177 | |
250 | |||
251 | \item \textbf{Browse WPS files} | 178 | \item \textbf{Browse WPS files} |
252 | Opens the file browser in the \textbf{/.rockbox} directory and displays | 179 | Opens the file browser in the \textbf{/.rockbox} directory and displays all .wps files. Selecting one will activate it, stop will exit back to the menu.\\ |
253 | all .wps files. Selecting one will activate it, stop will exit back to | 180 | For further information about the WPS see page \pageref{ref:WPS}. For information about editing a .wps file see page \pageref{ref:ConfiguringtheWPS}. |
254 | the menu.\\ | 181 | |
255 | |||
256 | For further information about the WPS see page \pageref{ref:WPS}. For | ||
257 | information about editing a .wps file see page \pageref{ref:ConfiguringtheWPS}. | ||
258 | |||
259 | \item \textbf{LCD Settings} | 182 | \item \textbf{LCD Settings} |
260 | 183 | This submenu contains settings that relate to the display of the \dap. | |
261 | %\begin{itemize} | 184 | \begin{itemize} |
262 | This submenu contains settings that relate to the display of the | 185 | \item \textbf{Backlight:} |
263 | Jukebox. | 186 | How long the backlight shines after a key press. Set to OFF to never light it, set to ON to never shut it off or set a preferred timeout period. |
264 | \item \textbf{Backlight:} | 187 | \item \textbf{Backlight on WhenPlugged:} |
265 | How long the backlight shines after a key | 188 | This option turns the backlight on constantly while the charger cable is connected. |
266 | press. Set to OFF to never light it, set to ON to never shut it off or | 189 | \item \textbf{Caption Backlight:} This option turns the backlight on for 25 seconds either side of the start of a new track so that the display can be read to see song information. |
267 | set a preferred timeout period. | 190 | \item \textbf{Contrast:} Changes the contrast of your LCD display. Warning: Setting the contrast too dark or too light can make it hard to find this menu option again! |
268 | \item \textbf{Backlight on WhenPlugged:} | 191 | \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolor,ipodvideo}{ |
269 | This option turns the backlight on constantly while the charger cable is connected. | 192 | \item \textbf{LCD Mode}: This setting lets you invert the whole screen, so now you get a black background and green text graphics. |
270 | \item \textbf{Caption Backlight:} This option turns the backlight on for | 193 | } |
271 | 25 seconds either side of the start of a new track so that the display | 194 | \item \textbf{Upside Down: }Displays the screen so that the top of the display is nearest the buttons. This is sometimes useful when carrying the \dap in a pocket for easy access to the headphone socket. |
272 | can be read to see song information. | 195 | \item \textbf{Line Selector: }Select this option to have a bar of inverted text (``Bar'' option) mark the current line in the File Browser rather than the default arrow to the left (``Pointer'' option). This gives slightly more room for filenames. |
273 | \item \textbf{Contrast:} Changes the contrast of your LCD display. | 196 | \end{itemize} |
274 | Warning: Setting the contrast too dark or too light can make it hard to | ||
275 | find this menu option again! | ||
276 | \item \textbf{LCD Mode} (Recorder only): This setting lets you invert | ||
277 | the whole screen, so now you get a black background and green text | ||
278 | graphics. | ||
279 | \item \textbf{Upside Down: }Displays the screen so that the top of the | ||
280 | display is nearest the buttons. This is sometimes useful when carrying | ||
281 | the Recorder in a pocket for easy access to the headphone socket. | ||
282 | \item \textbf{Line Selector: }Select this option to have a bar of | ||
283 | inverted text (``Bar'' option) mark the current line in the File | ||
284 | Browser rather than the default arrow to the left (``Pointer'' option). | ||
285 | This gives slightly more room for filenames. | ||
286 | %\end{itemize} | ||
287 | 197 | ||
288 | \item \textbf{Scrolling} | 198 | \item \textbf{Scrolling} |
289 | This feature controls how text will scroll in Rockbox. You can configure | 199 | This feature controls how text will scroll in Rockbox. You can configure the following parameters: |
290 | the following parameters: | 200 | \begin{itemize} |
291 | 201 | \item \textbf{Scroll Speed:} | |
292 | \begin{itemize} | 202 | Controls how many times per second the scrolling text moves a step. |
293 | \item \textbf{Scroll Speed:} | 203 | \item \textbf{Scroll StartDelay:} |
294 | Controls how many times per second the scrolling text moves a step. | 204 | Controls how many milliseconds Rockbox should wait before a new text begins scrolling. |
295 | \item \textbf{Scroll StartDelay:} | 205 | \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolor,ipodvideo}{ |
296 | Controls how many milliseconds Rockbox should wait before a new text begins scrolling. | 206 | \item \textbf{Scroll Step Size:} |
297 | \item \textbf{Scroll Step Size:} | 207 | Controls how many pixels the text scroll should move for each step. |
298 | Controls how many pixels the text scroll should move for each step. (Recorder/Ondio only) | 208 | } |
299 | \item \textbf{Bidirectional Scroll Limit: } | 209 | \item \textbf{Bidirectional Scroll Limit: } |
300 | Rockbox has two different scroll methods, always scrolling the text to the left, and when the line has ended, beginning again at the start, or moving to the | 210 | Rockbox has two different scroll methods, always scrolling the text to the left, and when the line has ended, beginning again at the start, or moving to the left until you can read the end of the line, and scroll right until you see the beginning again. Rockbox chooses which method it should use, depending of how much it has to scroll left. This setting lets you tell Rockbox where that limit is, expressed in percentage of line length. |
301 | left until you can read the end of the line, and scroll right until you | 211 | \end{itemize} |
302 | see the beginning again. Rockbox chooses which method it should use, | 212 | |
303 | depending of how much it has to scroll left. This setting lets you tell | 213 | \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolor,ipodvideo}{ |
304 | Rockbox where that limit is, expressed in percentage of line length. | 214 | \item \textbf{Status/Scrollbar} |
305 | \end{itemize} | 215 | Settings related to on screen status display and the scrollbar. |
306 | 216 | \begin{itemize} | |
307 | \item \textbf{Status/Scrollbar (Recorder only)} | 217 | \item \textbf{Scroll Bar: }Enables or disables the scroll bar at the left. |
308 | Settings related to on screen status display and the scrollbar. | 218 | \item \textbf{Status Bar: }Enables or disables the status bar at the upper side. |
309 | 219 | \item \textbf{Button Bar:} Enables or disables the button bar prompts for the F keys at the bottom of the screen. | |
310 | \begin{itemize} | 220 | \item \textbf{Volume Display:} Controls whether the volume is displayed as a graphic or a numerical percentage value on the Status Bar. |
311 | \item \textbf{Scroll Bar: }Enables or disables the scroll bar at the | 221 | \item \textbf{Battery Display: }Controls whether the battery charge status is displayed as a graphic or numerical percentage value on the Status Bar. |
312 | left. | 222 | \end{itemize} |
313 | \item \textbf{Status Bar: }Enables or disables the status bar | 223 | } |
314 | at the upper side. | ||
315 | \item \textbf{Button Bar:} Enables or disables the button bar prompts | ||
316 | for the F keys at the bottom of the screen. | ||
317 | \item \textbf{Volume Display:} Controls whether the volume is displayed | ||
318 | as a graphic or a numerical percentage value on the Status Bar. | ||
319 | \item \textbf{Battery Display: }Controls whether the battery charge | ||
320 | status is displayed as a graphic or numerical percentage value on the | ||
321 | Status Bar. | ||
322 | \end{itemize} | ||
323 | |||
324 | \item \textbf{Peak Meter (Recorder only) } | ||
325 | The peak meter can be configured with a number of parameters. (For a description of the peak meter see page \pageref{ref:Peakmeter}.) | ||
326 | 224 | ||
327 | \begin{itemize} | 225 | \opt{recorder,recorderv2fm,ondio,h1xx,h300,ipodnano,ipodcolor,ipodvideo}{ |
328 | \item \textbf{Peak Release:} | 226 | \item \textbf{Peak Meter} |
329 | This determines how fast the bar shrinks when the music becomes softer. | 227 | The peak meter can be configured with a number of parameters. (For a description of the peak meter see page \pageref{ref:Peakmeter}.) |
330 | Lower values make the peak meter look smoother. | 228 | |
331 | \item \textbf{Peak Hold Time:} | 229 | \begin{itemize} |
332 | Specifies the time after which the peak indicator will reset. If you set this value e.g. to 5s then the peak indicator displays the loudest volume value | 230 | \item \textbf{Peak Release:} |
333 | that occurred within the last 5 seconds. Big values are good if you | 231 | This determines how fast the bar shrinks when the music becomes softer. Lower values make the peak meter look smoother. |
334 | want to find the peak level of a song, which might be of interest when | 232 | \item \textbf{Peak Hold Time:} |
335 | copying music from the jukebox via the analogue output to some other | 233 | Specifies the time after which the peak indicator will reset. If you set this value e.g. to 5s then the peak indicator displays the loudest volume value that occurred within the last 5 seconds. Big values are good if you want to find the peak level of a song, which might be of interest when copying music from the jukebox via the analogue output to some other recording device. |
336 | recording device. | 234 | \item \textbf{Clip Hold Time:} |
337 | \item \textbf{Clip Hold Time:} | 235 | How long the clipping indicator will be visible after clipping was detected |
338 | How long the clipping indicator will be visible after clipping was detected | 236 | \item \textbf{Performance:} |
339 | \item \textbf{Performance:} | 237 | In high performance mode, the peak meter is updated as often as possible. This reduces the chance of missing a peak value, making the peak meter more precise. In energy save mode the peak meter is updated just often enough to look fluid. This reduces the load on the CPU and thus saves a little bit of energy. If you crave every second of runtime for your jukebox or simply use the peak meter as a screen effect, the use of energy save mode is recommended. If you want to use the peak meter as a measuring instrument you'll want to use high performance mode. |
340 | In high performance mode, the peak meter is updated as often as possible. This reduces the chance of missing a peak value, making the peak meter more precise. In energy save mode the peak meter is updated just often enough to look fluid. | 238 | \item \textbf{Scale:} |
341 | This reduces the load on the CPU and thus saves a little bit of energy. If you crave every second of runtime for your jukebox or simply use the peak meter as a screen effect, the use of energy save mode is recommended. If you want to use | 239 | Select whether the peak meter displays linear or logarithmic values. In ``dB'' (decibel) scale the volume values are scaled logarithmically. This very similar to the perception of loudness. The volume meters of digital audio devices usually are scaled this way. If you are interested in the power level that is applied to your headphones you should choose ``linear'' display. Unfortunately this value doesn't have real units like volts or watts since that depends on the phones. So they can only be displayed as percentage values. |
342 | the peak meter as a measuring instrument you'll want to use high performance mode. | 240 | \item \textbf{Minimum and maximum range:} |
343 | \item \textbf{Scale:} | 241 | These two options define the full value range that the peak meter displays. Recommended values for dB's are {}-40 for min. and 0 for maximum. For linear display, use 0 and 100\%. Note that {}-40 dB's is approximately 1\% in linear value, but if you change the minimum setting in linear mode slightly and then change to dbFs there will be a large change. You can use these values for 'zooming' into the peak meter. |
344 | Select whether the peak meter displays linear or logarithmic values. In | 242 | \end{itemize} |
345 | ``dB'' (decibel) scale the volume values are scaled logarithmically. | 243 | } |
346 | This very similar to the perception of loudness. The volume meters of | ||
347 | digital audio devices usually are scaled this way. If you are | ||
348 | interested in the power level that is applied to your headphones you | ||
349 | should choose ``linear'' display. Unfortunately this value | ||
350 | doesn't have real units like volts or watts since that | ||
351 | depends on the phones. So they can only be displayed as percentage | ||
352 | values. | ||
353 | \item \textbf{Minimum and maximum range:} These two options define the | ||
354 | full value range that the peak meter displays. Recommended values for | ||
355 | dbFs are {}-40 for min. and 0 for maximum. For linear display, use 0 | ||
356 | and 100\%. Note that {}-40 dbFs is approximately 1\% in linear value, | ||
357 | but if you change the minimum setting in linear mode slightly and then change to dbFs there will be a large change. You can use these values for | ||
358 | 'zooming' into the peak meter. | ||
359 | \end{itemize} | ||
360 | \end{itemize} | 244 | \end{itemize} |
361 | 245 | ||
362 | \subsubsection{\label{ref:SystemOptions}System Options} | 246 | \subsection{\label{ref:SystemOptions}System Options} |
363 | 247 | ||
364 | \begin{itemize} | 248 | \begin{itemize} |
365 | \item \textbf{Battery} | 249 | \item \textbf{Battery} |
366 | Options relating to the batteries in the Jukebox unit. | 250 | Options relating to the batteries in the \dap. |
367 | \begin{itemize} | 251 | \begin{itemize} |
368 | \item \textbf{Battery Capacity} can be used to tell the Jukebox what | 252 | \item \textbf{Battery Capacity} can be used to tell Rockbox what capacity (in mAh) of battery is being used inside it. |
369 | capacity (in mAh) of battery is being used inside it. The default is | 253 | \opt{player,recorder,recorderv2fm,ondio}{The default is 1500mAh for NiMH battery based units, and 2300mAh for LiOn battery based units, which is the capacity value for the standard batteries shipped with these units.} |
370 | 1500mAh for NiMH battery based units, and 2300mAh for LiOn battery | 254 | \opt{h1xx,h300}{The default is 1300mAh.} |
371 | based units, which is the capacity value for the standard batteries | 255 | This value is used for calculating remaining battery life. |
372 | shipped with these units. This value is used for calculating remaining | 256 | \opt{recorder}{ |
373 | battery life. | 257 | \item \textbf{Deep discharge} |
374 | \item \textbf{Deep discharge (Non{}-FM recorder only)} | 258 | Set this to ON if you intend to keep your charger connected for a long period of time. It lets the batteries go down to 10\% before starting to charge again. Setting this to OFF will cause the charging to restart on 95\%. |
375 | Set this to ON if you intend to keep your charger connected for a long | 259 | } |
376 | period of time. It lets the batteries go down to 10\% before starting | 260 | \opt{recorder}{ |
377 | to charge again. Setting this to OFF will cause the charging to restart | 261 | \item \textbf{Trickle Charge} |
378 | on 95\%. | 262 | The Jukebox cannot be turned off while the charger is connected. |
379 | \item \textbf{Trickle Charge (Non{}-FM recorder only)} | 263 | Therefore, trickle charge is needed to keep the batteries full after |
380 | The Jukebox cannot be turned off while the charger is connected. | 264 | charging has completed. For more in depth information about charging |
381 | Therefore, trickle charge is needed to keep the batteries full after | 265 | see Battery FAQ in your \textbf{/.rockbox/docs }directory. |
382 | charging has completed. For more in depth information about charging | 266 | } |
383 | see Battery FAQ in your \textbf{/.rockbox/docs }directory. | 267 | \end{itemize} |
384 | \end{itemize} | 268 | |
385 | |||
386 | \item \textbf{Disk} | 269 | \item \textbf{Disk} |
387 | Options relating to the hard disk. | 270 | Options relating to the hard disk. |
388 | 271 | ||
389 | \begin{itemize} | 272 | \begin{itemize} |
390 | \item \textbf{DiskSpindown:} | 273 | \item \textbf{DiskSpindown:} |
391 | Rockbox has a timer that makes it spin down the hard disk after being idle for acertain time. You can modify this timeout here. This idle time is only | 274 | Rockbox has a timer that makes it spin down the hard disk after being idle for acertain time. You can modify this timeout here. This idle time is only affected by user activity, like navigating through file browser. When the hard disk spins up to fill mp3 buffer, it automatically spins down afterwards. |
392 | affected by user activity, like navigating through file browser. When | 275 | \opt{recorder,h1xx,h300}{ |
393 | the hard disk spins up to fill mp3 buffer, it automatically spins down | 276 | \item \textbf{Disk Poweroff:} |
394 | afterwards. | 277 | Whether the disk is powered OFF or only set to ``sleep'' when spun down. Power off uses less power but takes longer to spin{}-up.} |
395 | \item \textbf{Disk Poweroff:}(non v2/FM{}-recorder only) | 278 | \end{itemize} |
396 | Whether the disk is powered OFF or only set to ``sleep'' when spun | 279 | |
397 | down. Power off uses less power but takes longer to spin{}-up. | 280 | \opt{recorder,recorderv2fm,h3xx}{ |
398 | \end{itemize} | 281 | \item \textbf{Time and Date} |
399 | 282 | Time related menu options. | |
400 | \item \textbf{Time and Date (Recorder Only)} | 283 | |
401 | Time related menu options. | 284 | \begin{itemize} |
402 | 285 | \item \textbf{Set Time/Date: } | |
403 | \begin{itemize} | 286 | Set current time and date. |
404 | \item \textbf{Set Time/Date: } | 287 | \item \textbf{Time Format: } |
405 | Set current time and date. | 288 | Choose 12 or 24 Hour clock. |
406 | \item \textbf{Time Format: } | 289 | \end{itemize} |
407 | Choose 12 or 24 Hour clock. | 290 | } |
408 | \end{itemize} | ||
409 | 291 | ||
410 | \item \textbf{\label{ref:idlepoweroff}Idle Poweroff} | 292 | \item \textbf{\label{ref:idlepoweroff}Idle Poweroff} |
411 | Rockbox can be configured to turn off power after the unit has been idle | 293 | Rockbox can be configured to turn off power after the unit has been idle for a defined number of minutes. The unit is idle when playback is stopped or paused. It is not idle while the USB or charger is connected, or while recording. |
412 | for a defined number of minutes. The unit is idle when playback is | 294 | |
413 | stopped or paused. It is not idle while the USB or charger is | ||
414 | connected, or while recording. | ||
415 | |||
416 | \item \textbf{Sleep Timer} | 295 | \item \textbf{Sleep Timer} |
417 | This option lets you power off your jukebox after playing for a given | 296 | This option lets you power off your jukebox after playing for a given time. \opt{recorderv2fm}{This setting is reset on boot. Using this option disables the \textbf{Wake up alarm} (see below).} |
418 | time. This setting is reset on boot. Using this option disables the | ||
419 | \textbf{Wake up alarm} (see below). | ||
420 | |||
421 | \item \textbf{Wake up alarm (Recorder v2/FM only)} | ||
422 | This option turns the Jukebox off and then starts it up again at the | ||
423 | specified time. This is most useful when combined with the Resume | ||
424 | setting in the Playback options set to ``Yes'', so that the Jukebox | ||
425 | wakes up and immediately starts playing music. Use LEFT and RIGHT to | ||
426 | adjust the minutes setting, UP and DOWN to adjust the HOURS. PLAY | ||
427 | confirms the alarm and shuts your Jukebox down, and STOP cancels | ||
428 | setting an alarm. If the Jukebox is turned on again before the alarm | ||
429 | occurs the alarm will be canceled. Using this option disables the \textbf{Sleep Timer} (see above). | ||
430 | |||
431 | \item \textbf{Limits} | ||
432 | This submenu relates to limits in the Rockbox operating system. | ||
433 | |||
434 | \begin{itemize} | ||
435 | \item \textbf{Max files in dir browser: }Configurable limit of files in | ||
436 | the directory browser (file buffer size). You can configure the size to | ||
437 | be between 50 and 10000 files in steps of 50 files. The default is 400, | ||
438 | higher values will shorten the music buffer.\\ | ||
439 | |||
440 | Note: the device must be rebooted for settings to take effect! | ||
441 | \item \textbf{Max playlist size: }Option to configure the maximum size | ||
442 | of a playlist. The playlist size can be between 1000 and 20000 files in | ||
443 | steps of 1000. By default it is 10000. Higher values will shorten the | ||
444 | music buffer.\\ | ||
445 | |||
446 | Note: the device must be rebooted for settings to take effect! | ||
447 | \end{itemize} | ||
448 | |||
449 | \item \textbf{Car Adapter Mode} | ||
450 | This option turns on and off the car ignition auto stop | ||
451 | function. | ||
452 | 297 | ||
453 | When using the Jukebox in a car, car adapter mode automatically stops | 298 | \opt{recorderv2fm}{ |
454 | playback on the Jukebox when power (i.e. from cigarette lighter power | 299 | \item \textbf{Wake up alarm (Recorder v2/FM only)} |
455 | adapter) to the external DC in jack is turned off. | 300 | This option turns the Jukebox off and then starts it up again at the specified time. This is most useful when combined with the Resume setting in the Playback options set to ``Yes'', so that the Jukebox wakes up and immediately starts playing music. Use LEFT and RIGHT to adjust the minutes setting, UP and DOWN to adjust the HOURS. PLAY confirms the alarm and shuts your Jukebox down, and STOP cancels setting an alarm. If the Jukebox is turned on again before the alarm occurs the alarm will be canceled. Using this option disables the \textbf{Sleep Timer} (see above). |
456 | 301 | } | |
457 | When the external power off condition is detected, the Car Adapter Mode | ||
458 | function only pauses the playback. In order to shut down the Jukebox | ||
459 | completely the \textbf{Idle Poweroff} function (see above) must also be | ||
460 | set. | ||
461 | |||
462 | If power to the DC in jack is turned back on before the \textbf{Idle | ||
463 | Poweroff} function has shut the Jukebox off, playback will be resumed | ||
464 | 5 seconds after the power is applied. This delay is to allow for the | ||
465 | time while the car engine is being started. Once the Jukebox is shut | ||
466 | off either manually, or automatically with the \textbf{Idle Poweroff | ||
467 | }function, it must be powered up manually to resume playback. | ||
468 | |||
469 | \item \textbf{Line In (Player only)} | ||
470 | This option activates the line in port on Jukebox Player, which | ||
471 | is off by default. | ||
472 | 302 | ||
473 | This is useful for such applications as: | 303 | \item \textbf{Limits} |
474 | \begin{itemize} | 304 | This submenu relates to limits in the Rockbox operating system. |
475 | \item Game boy {}-{\textgreater} Jukebox {}-{\textgreater} human | 305 | |
476 | \item laptop {}-{\textgreater} Jukebox {}-{\textgreater}human | 306 | \begin{itemize} |
477 | \item LAN party computer {}-{\textgreater} Jukebox {}-{\textgreater} human | 307 | \item \textbf{Max files in dir browser:} |
478 | \end{itemize} | 308 | Configurable limit of files in the directory browser (file buffer size). You can configure the size to be between 50 and 10000 files in steps of 50 files. The default is 400, higher values will shorten the music buffer.\\ |
309 | \item \textbf{Max playlist size:} | ||
310 | Option to configure the maximum size of a playlist. The playlist size can be between 1000 and 20000 files in | ||
311 | steps of 1000. By default it is 10000. Higher values will shorten the music buffer.\\ | ||
312 | \end{itemize} | ||
313 | |||
314 | \opt{player,recorder,recorderv2fm}{ | ||
315 | \item \textbf{Car Adapter Mode} | ||
316 | This option turns on and off the car ignition auto stop function. | ||
317 | |||
318 | When using the \dap in a car, car adapter mode automatically stops playback on the \dap when power (i.e. from cigarette lighter power adapter) to the external DC in jack is turned off. | ||
319 | |||
320 | When the external power off condition is detected, the Car Adapter Mode function only pauses the playback. In order to shut down the \dap completely the \textbf{Idle Poweroff} function (see above) must also be set. | ||
321 | |||
322 | If power to the DC in jack is turned back on before the \textbf{Idle Poweroff} function has shut the Jukebox off, playback will be resumed 5 seconds after the power is applied. This delay is to allow for the time while the car engine is being started. Once the Jukebox is shut off either manually, or automatically with the \textbf{Idle Poweroff}function, it must be powered up manually to resume playback. | ||
323 | } | ||
324 | \opt{player}{ | ||
325 | \item \textbf{Line In (Player only)} | ||
326 | This option activates the line in port on Jukebox Player, which is off by default. | ||
327 | |||
328 | This is useful for such applications as: | ||
329 | \begin{itemize} | ||
330 | \item Game boy {}-{\textgreater} Jukebox {}-{\textgreater} human | ||
331 | \item laptop {}-{\textgreater} Jukebox {}-{\textgreater}human | ||
332 | \item LAN party computer {}-{\textgreater} Jukebox {}-{\textgreater} human | ||
333 | \end{itemize} | ||
334 | } | ||
479 | 335 | ||
480 | \item \textbf{Manage settings} | 336 | \item \textbf{Manage settings} |
481 | This submenu deals with loading and saving settings. | 337 | This submenu deals with loading and saving settings. |
482 | 338 | ||
483 | \begin{itemize} | 339 | \begin{itemize} |
484 | \item \textbf{Browse .cfg Files: } | 340 | \item \textbf{Browse .cfg Files: } |
485 | This displays a list of configuration | 341 | This displays a list of configuration (.cfg) files stored in the \textbf{/.rockbox} system directory. This is useful if the \dap is plugged into more than one different output device (e.g. headphones, computer, car stereo, hi{}-fi) so that a settings file can be maintained for each. |
486 | (.cfg) files stored in the \textbf{/.rockbox} system directory. This | 342 | \item \textbf{Browse Firmwares:} |
487 | is useful if the Jukebox is plugged into more than one different output | 343 | This displays a list of firmware file in the \fname{/.rockbox} system directory. Playing a firmware file loads it into memory. Thus it is possible to run the original Archos firmware or a different version of Rockbox from here assuming that you have the right files installed on your disk. |
488 | device (e.g. headphones, computer, car stereo, hi{}-fi) so that a settings file can be maintained for each. | 344 | \item \textbf{Reset Settings: } |
489 | \item \textbf{Browse Firmwares:} This displays a list of firmware (.mod | 345 | This wipes the saved settings in the \dap and resets all settings to their default values. |
490 | for Players and .ajz for Recorders) file in the \textbf{/.rockbox} system directory. Playing a firmware file loads it into memory. Thus it is possible to | 346 | \item \textbf{Write .cfg file: } |
491 | run the original Archos firmware or a different version of Rockbox from | 347 | Saves the current settings into a .cfg file for later use with \textbf{Browse .cfg Files} above. |
492 | here assuming that you have the right files installed on your disk. | 348 | \end{itemize} |
493 | \item \textbf{Reset Settings: }This wipes the saved settings in the | 349 | |
494 | Jukebox and resets all settings to their default values. | ||
495 | \item \textbf{Write .cfg file: }Saves the current settings into a .cfg | ||
496 | file for later use with \textbf{Browse .cfg Files} above. | ||
497 | \end{itemize} | ||
498 | |||
499 | \end{itemize} | 350 | \end{itemize} |
500 | 351 | ||
501 | \subsubsection{\label{ref:Bookmarkconfigactual}Bookmarking} | 352 | \subsection{\label{ref:Bookmarkconfigactual}Bookmarking} |
502 | 353 | ||
503 | \begin{itemize} | 354 | \begin{itemize} |
504 | \item \textbf{Bookmark on Stop} | 355 | \item \textbf{Bookmark on Stop} |
505 | Write a bookmark to the disk whenever the stop key is pressed. If | 356 | Write a bookmark to the disk whenever the stop key is pressed. If playback is stopped it can be resumed easily at a later time. The \textbf{Resume} function remembers your position in the most recently accessed track regardless of this setting. |
506 | playback is stopped it can be resumed easily at a later time. The | ||
507 | \textbf{Resume} function remembers your position in the most | ||
508 | recently accessed track regardless of this setting. | ||
509 | \item \textbf{Load Last Bookmark} | 357 | \item \textbf{Load Last Bookmark} |
510 | When this is on, Rockbox automatically returns to the position of the | 358 | When this is on, Rockbox automatically returns to the position of the last bookmark within a file when it is played. If set to Ask, Rockbox will ask the user whether they want to start from the beginning or the bookmark. When set to no, playback always starts from the beginning and the Bookmark file must be played or \textbf{Load Bookmark} selected from the \textbf{Bookmarks} submenu of the Main Menu while the file is playing. |
511 | last bookmark within a file when it is played. If set to Ask, Rockbox | ||
512 | will ask the user whether they want to start from the beginning or the | ||
513 | bookmark. When set to no, playback always starts from the beginning | ||
514 | and the Bookmark file must be played or \textbf{Load Bookmark} selected | ||
515 | from the \textbf{Bookmarks} submenu of the Main Menu while the file is | ||
516 | playing. | ||
517 | \item \textbf{Maintain a list of Recently Used Bookmarks} | 359 | \item \textbf{Maintain a list of Recently Used Bookmarks} |
518 | If this option is turned on, Rockbox will store a list of Bookmarks that | 360 | If this option is turned on, Rockbox will store a list of Bookmarks that have been accessed recently. This is then accessible from the \textbf{Recent Bookmarks} option of the \textbf{Bookmarks} submenu of the Main Menu. |
519 | have been accessed recently. This is then accessible from the | ||
520 | \textbf{Recent Bookmarks} option of the \textbf{Bookmarks} submenu of | ||
521 | the Main Menu. | ||
522 | \end{itemize} | 361 | \end{itemize} |
523 | 362 | ||
524 | \subsection{\label{ref:Language}Language} | 363 | \subsection{\label{ref:Language}Language} |
525 | This setting controls the language of the Rockbox user interface. | 364 | This setting controls the language of the Rockbox user interface. Selecting a language will activate it. The language files must be in the \textbf{/.rockbox/lang/} directory. See page \pageref{ref:Loadinglanguages} for further details about languages. |
526 | Selecting a language will activate it. The language files must be in | ||
527 | the \textbf{/.rockbox/lang/} directory. | ||
528 | |||
529 | See page \pageref{ref:Loadinglanguages} for further details about | ||
530 | languages. | ||
531 | 365 | ||
532 | \subsection{Voice} | 366 | \subsection{Voice} |
533 | 367 | ||
534 | \begin{itemize} | 368 | \begin{itemize} |
535 | \item \textbf{Voice Menus} | 369 | \item \textbf{Voice Menus} |
536 | This option turns on the Voice User Interface, which will read out menu items and settings as they are selected by the cursor. In order for this to work, a voice file must be present in the \textbf{/.rockbox/lang/} directory on the recorder. Voice files are large (1.5MB) and are not shipped with Rockbox by | 370 | This option turns on the Voice User Interface, which will read out menu items and settings as they are selected by the cursor. In order for this to work, a voice file must be present in the \textbf{/.rockbox/lang/} directory on the \dap. Voice files are large (1.5MB) and are not shipped with Rockbox by default. |
537 | default. | 371 | The voice file is the name of the language for which it is made, followed by the extension .voice. So for English, the file name would be \fname{english.voice}. |
538 | 372 | This option is on by default. It will do nothing unless the appropriate .voice file is installed in the correct place on the \dap. | |
539 | The voice file is the name of the language for which it is made, | 373 | \begin{itemize} |
540 | followed by the extension .voice. So for English, the file name would | 374 | \item \textbf{Limitations} |
541 | be \textbf{english.voice}. | 375 | \begin{itemize} |
542 | 376 | \item Setting the Sound Option \textbf{Channels} to ``karaoke'' may disable voice menus. | |
543 | This option is on by default. It will do nothing unless the appropriate | 377 | \item Plugins and the wake up alarm do not support voice features. |
544 | .voice file is installed in the correct place on the Jukebox. | 378 | \end{itemize} |
545 | 379 | \end{itemize} | |
546 | \begin{itemize} | ||
547 | \item \textbf{Limitations} | ||
548 | \begin{itemize} | ||
549 | \item Setting the Sound Option \textbf{Channels} to ``karaoke'' may | ||
550 | disable voice menus. | ||
551 | \item Plugins and the wake up alarm do not support voice features. | ||
552 | \end{itemize} | ||
553 | 380 | ||
554 | \item \textbf{Voice Directories} | 381 | \item \textbf{Voice Directories} |
555 | This option turns on the speaking of directory names. The Jukebox is | 382 | This option turns on the speaking of directory names. The \dap is not powerful enough to produce these voices in real time, so a number of options are available. |
556 | not powerful enough to produce these voices in real time, so a number of options are available. | 383 | \begin{itemize} |
557 | 384 | \item \textbf{.talk mp3 clip: } | |
558 | \begin{itemize} | 385 | Use special pre{}-recorded MP3 files (\fname{\_dirname.talk}) in each directory. These must be generated in advance, and are typically produced synthetically using a text to speech engine on a PC. If no such file exists, the output is as for the ``numbers'' option below. |
559 | \item \textbf{.talk mp3 clip: } | 386 | \item \textbf{Spell: } |
560 | Use special pre{}-recorded MP3 files (\textbf{\_dirname.talk}) in each directory. These must be generated in advance, and are typically produced synthetically using a text to speech engine on a PC. If no such file exists, the output is as for the ``numbers'' option below. | 387 | Speak the directory name by spelling it out letter by letter. Support is provided only for the most common letters and punctuation. |
561 | \item \textbf{Spell: } | 388 | \item \textbf{Numbers: } |
562 | Speak the directory name by spelling it out letter | 389 | Each directory is assigned a number based upon its position in the file list. They are then announced as ``Directory 1'', ``Directory 2'' etc. |
563 | by letter. Support is provided only for the most common letters and | 390 | \item \textbf{Off: } |
564 | punctuation. | 391 | No attempt will be made to speak directory names. |
565 | \item \textbf{Numbers: } | 392 | \end{itemize} |
566 | Each directory is assigned a number based upon its position in the file list. They are then announced as ``Directory 1'', ``Directory 2'' etc. | ||
567 | \item \textbf{Off: } | ||
568 | No attempt will be made to speak directory names. | ||
569 | \end{itemize} | ||
570 | 393 | ||
571 | \item \textbf{Voice Filenames} | 394 | \item \textbf{Voice Filenames} |
572 | This option turns on the speaking of directory names. The options | 395 | This option turns on the speaking of directory names. The options provided are ``Spell'', ``Numbers'', and ``Off'' which function the same as for \textbf{Voice Directories} and ``.talk mp3 clip'', which functions as above except that the files are named with the same name as the music file (e.g. \fname{Punkadiddle.mp3 } would require a file called \textbf{Punkadiddle.mp3.talk}). |
573 | provided are ``Spell'', ``Numbers'', and ``Off'' which function the same as for \textbf{Voice Directories} and ``.talk mp3 clip'', which functions as above except that the files are named with the same name as the music file (e.g. \textbf{Punkadiddle.mp3 } would require a file called \textbf{Punkadiddle.mp3.talk}). | ||
574 | \end{itemize} | 396 | \end{itemize} |
575 | \end{itemize} | 397 | %\end{itemize} |
576 | See | 398 | See \url{http://www.rockbox.org/twiki/bin/view/Main/VoiceHowto} for more details on configuring speech support in Rockbox. |
577 | \url{http://www.rockbox.org/twiki/bin/view/Main/VoiceHowto} for more details on configuring speech support in Rockbox. | ||
578 | |||
diff --git a/manual/rockbox_interface/main.tex b/manual/rockbox_interface/main.tex index 8d8cbe0bb6..8ee78ab8b9 100644 --- a/manual/rockbox_interface/main.tex +++ b/manual/rockbox_interface/main.tex | |||
@@ -262,8 +262,7 @@ Rockbox. | |||
262 | \end{table} | 262 | \end{table} |
263 | } | 263 | } |
264 | 264 | ||
265 | \section{\label{ref:WPS}\label{ref:PartIISectionWPS}While Playing | 265 | \section{\label{ref:WPS}While Playing Screen} |
266 | Screen} | ||
267 | The While Playing Screen (WPS) displays various pieces of information | 266 | The While Playing Screen (WPS) displays various pieces of information |
268 | about the currently playing MP3 file: | 267 | about the currently playing MP3 file: |
269 | % | 268 | % |