4 files changed, 41 insertions, 41 deletions

diff --git a/firmware/drivers/ata.c b/firmware/drivers/ata.c
index 4780cf5c0f..ff463e52d1 100644
--- a/firmware/drivers/ata.c
+++ b/firmware/drivers/ata.c
@@ -280,7 +280,7 @@ STATICIRAM ICODE_ATTR void copy_read_sectors(unsigned char* buf, int wordcount)
         do
         {
             tmp = ATA_DATA;
-#if defined(SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
+#if defined(ATA_SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
             *buf++ = tmp & 0xff; /* I assume big endian */
             *buf++ = tmp >> 8;   /*  and don't use the SWAB16 macro */
 #else
@@ -295,7 +295,7 @@ STATICIRAM ICODE_ATTR void copy_read_sectors(unsigned char* buf, int wordcount)
         unsigned short* wbufend = wbuf + wordcount;
         do
         {
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
             *wbuf = swap16(ATA_DATA);
 #else
             *wbuf = ATA_DATA;
@@ -315,7 +315,7 @@ STATICIRAM ICODE_ATTR void copy_write_sectors(const unsigned char* buf,
         const unsigned char* bufend = buf + wordcount*2;
         do
         {
-#if defined(SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
+#if defined(ATA_SWAP_WORDS) || defined(ROCKBOX_LITTLE_ENDIAN)
             tmp = (unsigned short) *buf++;
             tmp |= (unsigned short) *buf++ << 8;
             SET_16BITREG(ATA_DATA, tmp);
@@ -332,7 +332,7 @@ STATICIRAM ICODE_ATTR void copy_write_sectors(const unsigned char* buf,
         unsigned short* wbufend = wbuf + wordcount;
         do
         {
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
             SET_16BITREG(ATA_DATA, swap16(*wbuf));
 #else
             SET_16BITREG(ATA_DATA, *wbuf);
@@ -1127,7 +1127,7 @@ static int identify(void)
     for (i=0; i<SECTOR_SIZE/2; i++) {
         /* the IDENTIFY words are already swapped, so we need to treat
            this info differently that normal sector data */
-#if defined(ROCKBOX_BIG_ENDIAN) && !defined(SWAP_WORDS)
+#if defined(ROCKBOX_BIG_ENDIAN) && !defined(ATA_SWAP_WORDS)
         identify_info[i] = swap16(ATA_DATA);
 #else
         identify_info[i] = ATA_DATA;
diff --git a/firmware/export/config/mpiohd200.h b/firmware/export/config/mpiohd200.h
index 358079a612..465154a4bd 100644
--- a/firmware/export/config/mpiohd200.h
+++ b/firmware/export/config/mpiohd200.h
@@ -11,7 +11,7 @@
 /* define this if you use an ATA controller */
 #define CONFIG_STORAGE STORAGE_ATA
 #define HAVE_LBA48
-#define SWAP_WORDS
+#define ATA_SWAP_WORDS
 
 /* define this if you have recording possibility */
 /* not implemented yet 
diff --git a/firmware/target/coldfire/ata-as-coldfire.S b/firmware/target/coldfire/ata-as-coldfire.S
index e7e0ee19c0..0b2cb850f4 100644
--- a/firmware/target/coldfire/ata-as-coldfire.S
+++ b/firmware/target/coldfire/ata-as-coldfire.S
@@ -56,14 +56,14 @@
  *   %d1 - shift count
  *   %d2-%d6 - read buffers
  *
- *   #ifdef SWAP_WORDS
+ *   #ifdef ATA_SWAP_WORDS
  *   %d7 - byte swap scrach
  *   %a3 - byte swap mask
  *   #endif
  */
 
 copy_read_sectors:
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     lea.l   (-32, %sp), %sp
     movem.l %d2-%d7/%a2-%a3, (%sp)
     movem.l (36, %sp), %a0-%a1
@@ -86,7 +86,7 @@ copy_read_sectors:
     moveq.l #24, %d1        /* preload shift count */
 
     move.w  (%a2), %d2      /* load initial word */
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.b  %d2, (%a0)+
     lsr.l   #8, %d2
 #else
@@ -96,7 +96,7 @@ copy_read_sectors:
 #endif
     btst.l  #1, %d0         /* longword aligned? (testing old d0 value!) */
     bne.b   .r_end_u_w1     /* yes, skip leading word handling */
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w  (%a2), %d3
     lsl.l   #8, %d2
     move.b  %d3, %d2
@@ -123,7 +123,7 @@ copy_read_sectors:
     swap    %d3             /* move to upper 16 bit */
     move.w  (%a2), %d3      /* load second word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d3
 #endif
 
@@ -144,7 +144,7 @@ copy_read_sectors:
     swap    %d3             /* move to upper 16 bit */
     move.w  (%a2), %d3      /* load 2nd word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d3
 #endif
 
@@ -156,7 +156,7 @@ copy_read_sectors:
     swap    %d4             /* move to upper 16 bit */
     move.w  (%a2), %d4      /* load 4th word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d4
 #endif
 
@@ -168,7 +168,7 @@ copy_read_sectors:
     swap    %d5             /* move to upper 16 bit */
     move.w  (%a2), %d5      /* load 6th word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d5
 #endif
 
@@ -180,7 +180,7 @@ copy_read_sectors:
     swap    %d6             /* move to upper 16 bit */
     move.w  (%a2), %d6      /* load 8th word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d6
 #endif
 
@@ -203,7 +203,7 @@ copy_read_sectors:
     swap    %d3             /* move to upper 16 bit */
     move.w  (%a2), %d3      /* load second word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d3
 #endif
 
@@ -219,7 +219,7 @@ copy_read_sectors:
 .r_end_u_l2:
     blo.b   .r_end_u_w2     /* one word left? */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w  (%a2), %d3
     lsl.l   #8, %d2
     move.b  %d3, %d2
@@ -245,7 +245,7 @@ copy_read_sectors:
     btst.l  #1, %d0         /* longword aligned? */
     beq.b   .r_end_a_w1     /* yes, skip leading word handling */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w  (%a2), %d7      /* copy initial word after byte swap */
     move.b  %d7, (%a0)+
     lsr.l   #8, %d7
@@ -265,7 +265,7 @@ copy_read_sectors:
     swap    %d1             /* move it to upper 16 bits */
     move.w  (%a2), %d1      /* load second word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d1
 #endif
 
@@ -290,7 +290,7 @@ copy_read_sectors:
     swap    %d3             /* move it to upper 16 bits */
     move.w  (%a2), %d3      /* load 8th word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d0
     SWAP_BYTES %d1
     SWAP_BYTES %d2
@@ -311,7 +311,7 @@ copy_read_sectors:
     swap    %d1             /* move it to upper 16 bits */
     move.w  (%a2), %d1      /* read second word */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d1
 #endif
 
@@ -322,7 +322,7 @@ copy_read_sectors:
 .r_end_a_l2:
     blo.b   .r_end_a_w2     /* one word left? */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w (%a2), %d7      /* copy final word after byte swap */
     move.b %d7, (%a0)+
     lsr.l  #8, %d7
@@ -333,7 +333,7 @@ copy_read_sectors:
 .r_end_a_w2:
 
 .r_exit:
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     movem.l (%sp), %d2-%d7/%a2-%a3
     lea.l   (32, %sp), %sp
 #else
@@ -365,14 +365,14 @@ copy_read_sectors:
  *   %d1 - shift count
  *   %d2-%d6 - read buffers
  *
- *   #ifdef SWAP_WORDS
+ *   #ifdef ATA_SWAP_WORDS
  *   %d7 - swap scrach
  *   %a3 - swap mask
  *   #endif
  */
 
 copy_write_sectors:
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     lea.l   (-32, %sp), %sp
     movem.l %d2-%d7/%a2-%a3, (%sp)
     movem.l (36, %sp), %a0-%a1
@@ -404,7 +404,7 @@ copy_write_sectors:
     move.l  %d2, %d3
     lsr.l   #8, %d3
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.l  %d3, %d7       /* byte swap low word of %d3 */
     lsr.l   #8, %d7
     lsl.l   #8, %d3
@@ -427,7 +427,7 @@ copy_write_sectors:
     lsr.l   #8, %d3
     or.l    %d3, %d2
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d2
 #endif
 
@@ -450,7 +450,7 @@ copy_write_sectors:
     lsr.l   #8, %d0
     or.l    %d0, %d2
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d2
 #endif
 
@@ -463,7 +463,7 @@ copy_write_sectors:
     lsr.l   #8, %d0
     or.l    %d0, %d3
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d3
 #endif
 
@@ -476,7 +476,7 @@ copy_write_sectors:
     lsr.l   #8, %d0
     or.l    %d0, %d4
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d4
 #endif
 
@@ -489,7 +489,7 @@ copy_write_sectors:
     lsr.l   #8, %d0
     or.l    %d0, %d5
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d5
 #endif
 
@@ -512,7 +512,7 @@ copy_write_sectors:
     lsr.l   #8, %d3
     or.l    %d3, %d2
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d2
 #endif
 
@@ -532,14 +532,14 @@ copy_write_sectors:
     move.l  %d2, %d3
     lsr.l   #8, %d3
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d3
 #endif
 
     move.w  %d3, (%a2)
 
 .w_end_u_w2:
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.l  %d2, %d7
     move.b  (%a0)+, %d2
     lsl.l   #8, %d2
@@ -558,7 +558,7 @@ copy_write_sectors:
     btst.l  #1, %d0
     beq.b   .w_end_a_w1
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w  (%a0)+, %d1    /* copy initial word bytes swaped */
     move.l  %d1, %d7
     lsl.l   #8, %d1
@@ -579,7 +579,7 @@ copy_write_sectors:
 .w_loop_a_l1:
     move.l  (%a0)+, %d1
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d1
 #endif
 
@@ -597,7 +597,7 @@ copy_write_sectors:
     movem.l (%a0), %d0-%d3
     lea.l   (16, %a0), %a0
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d0
     SWAP_BYTES %d1
     SWAP_BYTES %d2
@@ -630,7 +630,7 @@ copy_write_sectors:
 .w_loop_a_l2:
     move.l  (%a0)+, %d1
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     SWAP_BYTES %d1
 #endif
 
@@ -644,7 +644,7 @@ copy_write_sectors:
 .w_end_a_l2:
     blo.b   .w_end_a_w2     /* one word left? */
 
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     move.w  (%a0)+, %d0    /* copy final word after byte swap */
     move.l  %d0, %d7
     lsl.l   #8, %d0
@@ -658,7 +658,7 @@ copy_write_sectors:
 .w_end_a_w2:
 
 .w_exit:
-#ifdef SWAP_WORDS
+#ifdef ATA_SWAP_WORDS
     movem.l (%sp), %d2-%d7/%a2-%a3
     lea.l   (32, %sp), %sp
 #else
diff --git a/firmware/target/sh/archos/ata-target.h b/firmware/target/sh/archos/ata-target.h
index aef025e1df..42faf6fd80 100644
--- a/firmware/target/sh/archos/ata-target.h
+++ b/firmware/target/sh/archos/ata-target.h
@@ -25,7 +25,7 @@
 #define ATA_OPTIMIZED_READING
 #define ATA_OPTIMIZED_WRITING
 
-#define SWAP_WORDS
+#define ATA_SWAP_WORDS
 
 #define ATA_IOBASE      0x06100100
 #define ATA_DATA        (*((volatile unsigned short*)0x06104100))