diff options
Diffstat (limited to 'firmware/target')
3 files changed, 135 insertions, 0 deletions
diff --git a/firmware/target/arm/imx31/gigabeat-s/audio-gigabeat-s.c b/firmware/target/arm/imx31/gigabeat-s/audio-gigabeat-s.c new file mode 100644 index 0000000000..6dd90bfdb7 --- /dev/null +++ b/firmware/target/arm/imx31/gigabeat-s/audio-gigabeat-s.c | |||
@@ -0,0 +1,56 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * | ||
10 | * Copyright (C) 2008 by Nils Wallménius | ||
11 | * | ||
12 | * This program is free software; you can redistribute it and/or | ||
13 | * modify it under the terms of the GNU General Public License | ||
14 | * as published by the Free Software Foundation; either version 2 | ||
15 | * of the License, or (at your option) any later version. | ||
16 | * | ||
17 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
18 | * KIND, either express or implied. | ||
19 | * | ||
20 | ****************************************************************************/ | ||
21 | #include "wm8978.h" | ||
22 | #include "audio.h" | ||
23 | |||
24 | void audio_set_output_source(int source) | ||
25 | { | ||
26 | (void)source; /* TODO */ | ||
27 | } | ||
28 | |||
29 | void audio_input_mux(int source, unsigned int flags) | ||
30 | { | ||
31 | (void)flags; | ||
32 | switch (source) | ||
33 | { | ||
34 | case AUDIO_SRC_PLAYBACK: | ||
35 | /* deselect bypass patths and set volume to -15dB */ | ||
36 | wmc_clear(WMC_LEFT_MIXER_CTRL, (WMC_BYPL2LMIX) | (7<<2)); | ||
37 | wmc_clear(WMC_RIGHT_MIXER_CTRL, (WMC_BYPR2RMIX) | (7<<2)); | ||
38 | /* disable L2/R2 inputs and boost stage */ | ||
39 | wmc_clear(WMC_POWER_MANAGEMENT2, | ||
40 | WMC_INPPGAENR | WMC_INPPGAENL | WMC_BOOSTENL | WMC_BOOSTENR); | ||
41 | break; | ||
42 | |||
43 | case AUDIO_SRC_FMRADIO: | ||
44 | /* enable L2/R2 inputs and boost stage */ | ||
45 | wmc_set(WMC_POWER_MANAGEMENT2, | ||
46 | WMC_INPPGAENR | WMC_INPPGAENL | WMC_BOOSTENL | WMC_BOOSTENR); | ||
47 | /* select bypass patths and set volume to 0dB */ | ||
48 | wmc_set(WMC_LEFT_MIXER_CTRL, (WMC_BYPL2LMIX) | (5<<2)); | ||
49 | wmc_set(WMC_RIGHT_MIXER_CTRL, (WMC_BYPR2RMIX) | (5<<2)); | ||
50 | break; | ||
51 | |||
52 | default: | ||
53 | source = AUDIO_SRC_PLAYBACK; | ||
54 | } | ||
55 | } | ||
56 | |||
diff --git a/firmware/target/arm/imx31/gigabeat-s/fmradio-i2c-gigabeat-s.c b/firmware/target/arm/imx31/gigabeat-s/fmradio-i2c-gigabeat-s.c new file mode 100644 index 0000000000..5e5c4853dd --- /dev/null +++ b/firmware/target/arm/imx31/gigabeat-s/fmradio-i2c-gigabeat-s.c | |||
@@ -0,0 +1,49 @@ | |||
1 | /*************************************************************************** | ||
2 | * __________ __ ___. | ||
3 | * Open \______ \ ____ ____ | | _\_ |__ _______ ___ | ||
4 | * Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ / | ||
5 | * Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < < | ||
6 | * Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \ | ||
7 | * \/ \/ \/ \/ \/ | ||
8 | * $Id$ | ||
9 | * Physical interface of the SI4700 in the Gigabeat S | ||
10 | * | ||
11 | * Copyright (C) 2008 by Nils Wallménius | ||
12 | * | ||
13 | * This program is free software; you can redistribute it and/or | ||
14 | * modify it under the terms of the GNU General Public License | ||
15 | * as published by the Free Software Foundation; either version 2 | ||
16 | * of the License, or (at your option) any later version. | ||
17 | * | ||
18 | * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY | ||
19 | * KIND, either express or implied. | ||
20 | * | ||
21 | ****************************************************************************/ | ||
22 | #include "config.h" | ||
23 | #include "system.h" | ||
24 | #include "i2c-imx31.h" | ||
25 | #include "fmradio_i2c.h" | ||
26 | |||
27 | struct i2c_node si4700_i2c_node = | ||
28 | { | ||
29 | .num = I2C2_NUM, | ||
30 | .ifdr = I2C_IFDR_DIV192, /* 66MHz/.4MHz = 165, closest = 192 = 343750Hz */ | ||
31 | /* Just hard-code for now - scaling may require | ||
32 | * updating */ | ||
33 | .addr = (0x20), | ||
34 | }; | ||
35 | |||
36 | int fmradio_i2c_write(unsigned char address, const unsigned char* buf, int count) | ||
37 | { | ||
38 | (void)address; | ||
39 | i2c_write(&si4700_i2c_node, buf, count); | ||
40 | return 0; | ||
41 | } | ||
42 | |||
43 | int fmradio_i2c_read(unsigned char address, unsigned char* buf, int count) | ||
44 | { | ||
45 | (void)address; | ||
46 | i2c_read(&si4700_i2c_node, -1, buf, count); | ||
47 | return 0; | ||
48 | } | ||
49 | |||
diff --git a/firmware/target/arm/imx31/gigabeat-s/power-imx31.c b/firmware/target/arm/imx31/gigabeat-s/power-imx31.c index de7f5800e6..07e6462bfb 100644 --- a/firmware/target/arm/imx31/gigabeat-s/power-imx31.c +++ b/firmware/target/arm/imx31/gigabeat-s/power-imx31.c | |||
@@ -26,6 +26,9 @@ | |||
26 | #include "backlight-target.h" | 26 | #include "backlight-target.h" |
27 | #include "avic-imx31.h" | 27 | #include "avic-imx31.h" |
28 | #include "mc13783.h" | 28 | #include "mc13783.h" |
29 | #include "i2c-imx31.h" | ||
30 | |||
31 | extern struct i2c_node si4700_i2c_node; | ||
29 | 32 | ||
30 | static bool charger_detect = false; | 33 | static bool charger_detect = false; |
31 | 34 | ||
@@ -79,6 +82,33 @@ bool ide_powered(void) | |||
79 | return (GPIO3_DR & (1 << 5)) != 0; | 82 | return (GPIO3_DR & (1 << 5)) != 0; |
80 | } | 83 | } |
81 | 84 | ||
85 | #if CONFIG_TUNER | ||
86 | bool tuner_power(bool status) | ||
87 | { | ||
88 | if (status) | ||
89 | { | ||
90 | /* the si4700 is the only thing connected to i2c2 so | ||
91 | we can diable the i2c module when not in use */ | ||
92 | i2c_enable_node(&si4700_i2c_node, true); | ||
93 | /* enable the fm chip */ | ||
94 | imx31_regmod32(&GPIO1_DR, (1 << 26), (1 << 26)); | ||
95 | /* enable CLK32KMCU clock */ | ||
96 | mc13783_set(MC13783_POWER_CONTROL0, MC13783_CLK32KMCUEN); | ||
97 | } | ||
98 | else | ||
99 | { | ||
100 | /* the si4700 is the only thing connected to i2c2 so | ||
101 | we can diable the i2c module when not in use */ | ||
102 | i2c_enable_node(&si4700_i2c_node, false); | ||
103 | /* disable the fm chip */ | ||
104 | imx31_regmod32(&GPIO1_DR, 0, (1 << 26)); | ||
105 | /* disable CLK32KMCU clock */ | ||
106 | mc13783_clear(MC13783_POWER_CONTROL0, MC13783_CLK32KMCUEN); | ||
107 | } | ||
108 | return true; | ||
109 | } | ||
110 | #endif /* #if CONFIG_TUNER */ | ||
111 | |||
82 | void power_off(void) | 112 | void power_off(void) |
83 | { | 113 | { |
84 | /* Cut backlight */ | 114 | /* Cut backlight */ |