1 files changed, 132 insertions, 0 deletions

diff --git a/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
new file mode 100644
index 0000000000..0ebe11e24d
--- /dev/null
+++ b/firmware/target/mips/ingenic_x1000/fiiom3k/spl-fiiom3k.c
@@ -0,0 +1,132 @@
+/***************************************************************************
+ *             __________               __   ___.
+ *   Open      \______   \ ____   ____ |  | _\_ |__   _______  ___
+ *   Source     |       _//  _ \_/ ___\|  |/ /| __ \ /  _ \  \/  /
+ *   Jukebox    |    |   (  <_> )  \___|    < | \_\ (  <_> > <  <
+ *   Firmware   |____|_  /\____/ \___  >__|_ \|___  /\____/__/\_ \
+ *                     \/            \/     \/    \/            \/
+ * $Id$
+ *
+ * Copyright (C) 2021 Aidan MacDonald
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
+ * KIND, either express or implied.
+ *
+ ****************************************************************************/
+
+#include "spl-x1000.h"
+#include "gpio-x1000.h"
+#include "nand-x1000.h"
+#include "system.h"
+#include <string.h>
+
+/* Boot select button state must remain stable for this duration
+ * before the choice will be accepted. Currently 100ms.
+ */
+#define BTN_STABLE_TIME (100 * (X1000_EXCLK_FREQ / 4000))
+
+static const char normal_cmdline[] = "mem=64M@0x0\
+ no_console_suspend\
+ console=ttyS2,115200n8\
+ lpj=5009408\
+ ip=off\
+ init=/linuxrc\
+ ubi.mtd=3\
+ root=ubi0:rootfs\
+ ubi.mtd=4\
+ rootfstype=ubifs\
+ rw\
+ loglevel=8";
+
+static const char recovery_cmdline[] = "mem=64M@0x0\
+ no_console_suspend\
+ console=ttyS2,115200n8\
+ lpj=5009408\
+ ip=off";
+
+const struct spl_boot_option spl_boot_options[] = {
+    {
+        /* Rockbox: the first unused NAND page is 26 KiB in, and the
+         * remainder of the block is unused, giving us 102 KiB to use.
+         */
+        .nand_addr = 0x6800,
+        .nand_size = 0x19800,
+        .load_addr = 0x80003ff8, /* first 8 bytes are bootloader ID */
+        .exec_addr = 0x80004000,
+        .cmdline = NULL,
+    },
+    {
+        /* Original firmware */
+        .nand_addr = 0x20000,
+        .nand_size = 0x400000,
+        .load_addr = 0x80efffc0,
+        .exec_addr = 0x80f00000,
+        .cmdline = normal_cmdline,
+    },
+    {
+        /* Recovery image */
+        .nand_addr = 0x420000,
+        .nand_size = 0x500000,
+        .load_addr = 0x80efffc0,
+        .exec_addr = 0x80f00000,
+        .cmdline = recovery_cmdline,
+    },
+};
+
+void spl_error(void)
+{
+    const int pin = (1 << 24);
+
+    /* Turn on button light */
+    jz_clr(GPIO_INT(GPIO_C), pin);
+    jz_set(GPIO_MSK(GPIO_C), pin);
+    jz_clr(GPIO_PAT1(GPIO_C), pin);
+    jz_set(GPIO_PAT0(GPIO_C), pin);
+
+    while(1) {
+        /* Turn it off */
+        mdelay(100);
+        jz_set(GPIO_PAT0(GPIO_C), pin);
+
+        /* Turn it on */
+        mdelay(100);
+        jz_clr(GPIO_PAT0(GPIO_C), pin);
+    }
+}
+
+int spl_get_boot_option(void)
+{
+    const uint32_t pinmask = (1 << 17) | (1 << 19);
+
+    uint32_t pin = 1, lastpin = 0;
+    uint32_t deadline = 0;
+
+    /* Configure the button GPIOs as inputs */
+    gpio_config(GPIO_A, pinmask, GPIO_INPUT);
+
+    /* Poll the pins for a short duration to detect a keypress */
+    do {
+        lastpin = pin;
+        pin = ~REG_GPIO_PIN(GPIO_A) & pinmask;
+        if(pin != lastpin) {
+            /* This will always be set on the first iteration */
+            deadline = __ost_read32() + BTN_STABLE_TIME;
+        }
+    } while(__ost_read32() < deadline);
+
+    /* Play button boots original firmware */
+    if(pin == (1 << 17))
+        return SPL_BOOTOPT_ORIG_FW;
+
+    /* Volume up boots recovery */
+    if(pin == (1 << 19))
+        return SPL_BOOTOPT_RECOVERY;
+
+    /* Default is to boot Rockbox */
+    return SPL_BOOTOPT_ROCKBOX;
+}