3 files changed, 4 insertions, 4 deletions

diff --git a/firmware/target/arm/sandisk/power-c200_e200.c b/firmware/target/arm/sandisk/power-c200_e200.c
index 910c3aaead..8745aa3fb6 100644
--- a/firmware/target/arm/sandisk/power-c200_e200.c
+++ b/firmware/target/arm/sandisk/power-c200_e200.c
@@ -85,7 +85,7 @@ bool tuner_power_nolock(bool status)
 #if defined(SANSA_E200)
             outl(inl(0x70000084) | 0x1, 0x70000084);
 #else /* SANSA_C200 */
-            DEV_INIT &= ~0x800;
+            DEV_INIT2 &= ~0x800;
 #endif
             udelay(5);
 
@@ -120,7 +120,7 @@ bool tuner_power_nolock(bool status)
 #if defined (SANSA_E200)
             outl(inl(0x70000084) & ~0x1, 0x70000084);
 #else
-            DEV_INIT |= 0x800;
+            DEV_INIT2 |= 0x800;
 #endif
         }
 
diff --git a/firmware/target/arm/sandisk/sansa-c200/lcd-c200.c b/firmware/target/arm/sandisk/sansa-c200/lcd-c200.c
index 24a7585508..5975ab159d 100644
--- a/firmware/target/arm/sandisk/sansa-c200/lcd-c200.c
+++ b/firmware/target/arm/sandisk/sansa-c200/lcd-c200.c
@@ -88,7 +88,7 @@ void lcd_init_device(void)
     outl(inl(0x70000010) & ~0xfc000000, 0x70000010);
     outl(inl(0x70000010), 0x70000010);
 
-    DEV_INIT &= ~0x400;
+    DEV_INIT2 &= ~0x400;
     udelay(10000);
     
     LCD1_CONTROL &= ~0x4;
diff --git a/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c b/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
index 41926bb885..bf1fcf9926 100644
--- a/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
+++ b/firmware/target/arm/sandisk/sansa-e200/lcd-e200.c
@@ -372,7 +372,7 @@ void lcd_init_device(void)
 /* Controller init */
     outl((inl(0x70000084) | (1 << 28)), 0x70000084);
     outl((inl(0x70000080) & ~(1 << 28)), 0x70000080);
-    outl(((inl(0x70000010) & (0x03ffffff)) | (0x15 << 26)), 0x70000010);
+    DEV_INIT1 = ( (DEV_INIT1 & 0x03ffffff) | (0x15 << 26) );
     outl(((inl(0x70000014) & (0x0fffffff)) | (0x5 << 28)), 0x70000014);
     outl((inl(0x70000020) & ~(0x3 << 10)), 0x70000020);
     DEV_EN |= DEV_LCD; /* Enable controller */