diff options
Diffstat (limited to 'firmware/export')
-rw-r--r-- | firmware/export/config-fuze.h | 205 | ||||
-rw-r--r-- | firmware/export/config.h | 4 |
2 files changed, 209 insertions, 0 deletions
diff --git a/firmware/export/config-fuze.h b/firmware/export/config-fuze.h new file mode 100644 index 0000000000..d9aac46a14 --- /dev/null +++ b/firmware/export/config-fuze.h | |||
@@ -0,0 +1,205 @@ | |||
1 | /* | ||
2 | * This config file is for the Sandisk Sansa Fuze | ||
3 | */ | ||
4 | #define TARGET_TREE /* this target is using the target tree system */ | ||
5 | |||
6 | /* For Rolo and boot loader */ | ||
7 | #define MODEL_NUMBER 43 | ||
8 | #define MODEL_NAME "Sandisk Sansa Fuze" | ||
9 | |||
10 | #define HW_SAMPR_CAPS (SAMPR_CAP_44) | ||
11 | |||
12 | /* define this if you have recording possibility */ | ||
13 | #define HAVE_RECORDING | ||
14 | |||
15 | #define REC_SAMPR_CAPS (SAMPR_CAP_22) | ||
16 | #define REC_FREQ_DEFAULT REC_FREQ_22 /* Default is not 44.1kHz */ | ||
17 | #define REC_SAMPR_DEFAULT SAMPR_22 | ||
18 | |||
19 | /* Define bitmask of input sources - recordable bitmask can be defined | ||
20 | explicitly if different */ | ||
21 | #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) | ||
22 | |||
23 | /* define this if you have a bitmap LCD display */ | ||
24 | #define HAVE_LCD_BITMAP | ||
25 | |||
26 | /* define this if you have a colour LCD */ | ||
27 | #define HAVE_LCD_COLOR | ||
28 | |||
29 | /* define this if you want album art for this target */ | ||
30 | #define HAVE_ALBUMART | ||
31 | |||
32 | /* define this if you have a light associated with the buttons */ | ||
33 | #define HAVE_BUTTON_LIGHT | ||
34 | |||
35 | /* define this if you have access to the quickscreen */ | ||
36 | #define HAVE_QUICKSCREEN | ||
37 | |||
38 | /* define this if you have access to the pitchscreen */ | ||
39 | #define HAVE_PITCHSCREEN | ||
40 | |||
41 | /* define this if you would like tagcache to build on this target */ | ||
42 | #define HAVE_TAGCACHE | ||
43 | |||
44 | /* LCD dimensions */ | ||
45 | #define LCD_WIDTH 220 | ||
46 | #define LCD_HEIGHT 176 | ||
47 | #define LCD_DEPTH 16 /* 65536 colours */ | ||
48 | #define LCD_PIXELFORMAT RGB565 /* rgb565 */ | ||
49 | |||
50 | #ifndef BOOTLOADER | ||
51 | /* define this if you have LCD enable function */ | ||
52 | #define HAVE_LCD_ENABLE | ||
53 | |||
54 | /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE | ||
55 | should be defined as well. */ | ||
56 | #define HAVE_LCD_SLEEP | ||
57 | #define HAVE_LCD_SLEEP_SETTING | ||
58 | #endif | ||
59 | |||
60 | /* define this if you can flip your LCD */ | ||
61 | #define HAVE_LCD_FLIP | ||
62 | |||
63 | /* define this if you can invert the colours on your LCD */ | ||
64 | #define HAVE_LCD_INVERT | ||
65 | |||
66 | /* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */ | ||
67 | |||
68 | #define CONFIG_KEYPAD SANSA_FUZE_PAD | ||
69 | |||
70 | /* Define this if you do software codec */ | ||
71 | #define CONFIG_CODEC SWCODEC | ||
72 | |||
73 | /* There is no hardware tone control */ | ||
74 | #define HAVE_SW_TONE_CONTROLS | ||
75 | |||
76 | /* We're working on the assumption that the AS3525 has something | ||
77 | similar to the AS3514 for audio codec etc */ | ||
78 | #define HAVE_AS3514 | ||
79 | |||
80 | /* define this if you have a real-time clock */ | ||
81 | #ifndef BOOTLOADER | ||
82 | #define CONFIG_RTC RTC_AS3525 | ||
83 | #endif | ||
84 | |||
85 | /* Define this if you have a software controlled poweroff */ | ||
86 | #define HAVE_SW_POWEROFF | ||
87 | |||
88 | /* Some Sansa E200s seem to be FAT16 formatted */ | ||
89 | #define HAVE_FAT16SUPPORT | ||
90 | |||
91 | /* The number of bytes reserved for loadable codecs */ | ||
92 | #define CODEC_SIZE 0x100000 | ||
93 | |||
94 | /* The number of bytes reserved for loadable plugins */ | ||
95 | #define PLUGIN_BUFFER_SIZE 0x80000 | ||
96 | |||
97 | #define AB_REPEAT_ENABLE 1 | ||
98 | |||
99 | /* FM Tuner - suspected to be the SI4702, but use SI4700 for now */ | ||
100 | #define CONFIG_TUNER SI4700 | ||
101 | /* #define HAVE_TUNER_PWR_CTRL */ | ||
102 | |||
103 | /* Define this for LCD backlight available */ | ||
104 | #define HAVE_BACKLIGHT | ||
105 | #define HAVE_BACKLIGHT_BRIGHTNESS | ||
106 | |||
107 | /* define this if the unit uses a scrollwheel for navigation */ | ||
108 | #define HAVE_SCROLLWHEEL | ||
109 | /* define from which rotation speed [degree/sec] on the acceleration starts */ | ||
110 | #define WHEEL_ACCEL_START 540 | ||
111 | /* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */ | ||
112 | #define WHEEL_ACCELERATION 1 | ||
113 | |||
114 | /* define this if you have a flash memory storage */ | ||
115 | #define HAVE_FLASH_STORAGE | ||
116 | |||
117 | /* define this if the flash memory uses the SecureDigital Memory Card protocol */ | ||
118 | #define CONFIG_STORAGE STORAGE_SD | ||
119 | |||
120 | #define BATTERY_CAPACITY_DEFAULT 750 /* default battery capacity */ | ||
121 | #define BATTERY_CAPACITY_MIN 750 /* min. capacity selectable */ | ||
122 | #define BATTERY_CAPACITY_MAX 750 /* max. capacity selectable */ | ||
123 | #define BATTERY_CAPACITY_INC 0 /* capacity increment */ | ||
124 | #define BATTERY_TYPES_COUNT 1 /* only one type */ | ||
125 | |||
126 | /* Hardware controlled charging? FIXME */ | ||
127 | #define CONFIG_CHARGING CHARGING_SIMPLE | ||
128 | |||
129 | /* define this if the unit can be powered or charged via USB */ | ||
130 | #define HAVE_USB_POWER | ||
131 | |||
132 | /** Non-simulator section **/ | ||
133 | #ifndef SIMULATOR | ||
134 | |||
135 | /* Define this if you have an AMS AS3525*/ | ||
136 | #define CONFIG_CPU AS3525 | ||
137 | |||
138 | /* Define this if you want to use the AS2525 i2c interface */ | ||
139 | #define CONFIG_I2C I2C_AS3525 | ||
140 | |||
141 | /* define this if the hardware can be powered off while charging */ | ||
142 | /* Sansa can't be powered off while charging */ | ||
143 | /* #define HAVE_POWEROFF_WHILE_CHARGING */ | ||
144 | |||
145 | /* The start address index for ROM builds */ | ||
146 | #define ROM_START 0x00000000 | ||
147 | |||
148 | /* Define this to the CPU frequency */ | ||
149 | #define CPU_FREQ 75000000 | ||
150 | |||
151 | /* Type of LCD */ | ||
152 | #define CONFIG_LCD LCD_FUZE | ||
153 | |||
154 | /* Offset ( in the firmware file's header ) to the file CRC and data. These are | ||
155 | only used when loading the old format rockbox.e200 file */ | ||
156 | #define FIRMWARE_OFFSET_FILE_CRC 0x0 | ||
157 | #define FIRMWARE_OFFSET_FILE_DATA 0x8 | ||
158 | |||
159 | #ifndef BOOTLOADER | ||
160 | #define HAVE_MULTIVOLUME | ||
161 | #define HAVE_HOTSWAP | ||
162 | #endif | ||
163 | |||
164 | /* #define USB_IPODSTYLE */ | ||
165 | |||
166 | /* USB On-the-go */ | ||
167 | #define CONFIG_USBOTG USBOTG_AS3525 | ||
168 | |||
169 | /* enable these for the experimental usb stack */ | ||
170 | //#define HAVE_USBSTACK | ||
171 | #define USB_VENDOR_ID 0x0781 | ||
172 | #define USB_PRODUCT_ID 0x7423 | ||
173 | |||
174 | /* Virtual LED (icon) */ | ||
175 | #define CONFIG_LED LED_VIRTUAL | ||
176 | |||
177 | /* Define this if you have adjustable CPU frequency */ | ||
178 | #define HAVE_ADJUSTABLE_CPU_FREQ | ||
179 | |||
180 | #define BOOTFILE_EXT "sansa" | ||
181 | #define BOOTFILE "rockbox." BOOTFILE_EXT | ||
182 | #define BOOTDIR "/.rockbox" | ||
183 | |||
184 | #define ICODE_ATTR_TREMOR_NOT_MDCT | ||
185 | |||
186 | #define INCLUDE_TIMEOUT_API | ||
187 | |||
188 | #endif /* SIMULATOR */ | ||
189 | |||
190 | /** Port-specific settings **/ | ||
191 | |||
192 | /* Main LCD backlight brightness range and defaults */ | ||
193 | #define MIN_BRIGHTNESS_SETTING 1 | ||
194 | #define MAX_BRIGHTNESS_SETTING 12 | ||
195 | #define DEFAULT_BRIGHTNESS_SETTING 6 | ||
196 | |||
197 | /* Default recording levels */ | ||
198 | #define DEFAULT_REC_MIC_GAIN 23 | ||
199 | #define DEFAULT_REC_LEFT_GAIN 23 | ||
200 | #define DEFAULT_REC_RIGHT_GAIN 23 | ||
201 | |||
202 | #ifdef E200R_INSTALLER | ||
203 | #define IRAMORIG 0x40004000 | ||
204 | #endif | ||
205 | |||
diff --git a/firmware/export/config.h b/firmware/export/config.h index c12f6ce4d2..0867efda45 100644 --- a/firmware/export/config.h +++ b/firmware/export/config.h | |||
@@ -105,6 +105,7 @@ | |||
105 | #define MEIZU_M6SP_PAD 33 | 105 | #define MEIZU_M6SP_PAD 33 |
106 | #define MEIZU_M3_PAD 34 | 106 | #define MEIZU_M3_PAD 34 |
107 | #define SANSA_CLIP_PAD 35 | 107 | #define SANSA_CLIP_PAD 35 |
108 | #define SANSA_FUZE_PAD 36 | ||
108 | 109 | ||
109 | /* CONFIG_REMOTE_KEYPAD */ | 110 | /* CONFIG_REMOTE_KEYPAD */ |
110 | #define H100_REMOTE 1 | 111 | #define H100_REMOTE 1 |
@@ -150,6 +151,7 @@ | |||
150 | #define LCD_ONDAVX747 29 /* as used by the Onda VX747 */ | 151 | #define LCD_ONDAVX747 29 /* as used by the Onda VX747 */ |
151 | #define LCD_ONDAVX767 30 /* as used by the Onda VX767 */ | 152 | #define LCD_ONDAVX767 30 /* as used by the Onda VX767 */ |
152 | #define LCD_SSD1303 31 /* as used by the Sansa Clip */ | 153 | #define LCD_SSD1303 31 /* as used by the Sansa Clip */ |
154 | #define LCD_FUZE 32 /* as used by the Sansa Fuze */ | ||
153 | 155 | ||
154 | /* LCD_PIXELFORMAT */ | 156 | /* LCD_PIXELFORMAT */ |
155 | #define HORIZONTAL_PACKING 1 | 157 | #define HORIZONTAL_PACKING 1 |
@@ -320,6 +322,8 @@ | |||
320 | #include "config-e200v2.h" | 322 | #include "config-e200v2.h" |
321 | #elif defined(SANSA_M200V2) | 323 | #elif defined(SANSA_M200V2) |
322 | #include "config-m200v2.h" | 324 | #include "config-m200v2.h" |
325 | #elif defined(SANSA_FUZE) | ||
326 | #include "config-fuze.h" | ||
323 | #else | 327 | #else |
324 | /* no known platform */ | 328 | /* no known platform */ |
325 | #endif | 329 | #endif |