3 files changed, 196 insertions, 0 deletions

diff --git a/firmware/export/config-hdd1630.h b/firmware/export/config-hdd1630.h
new file mode 100755
index 0000000000..19ca190a57
--- /dev/null
+++ b/firmware/export/config-hdd1630.h
@@ -0,0 +1,189 @@
+/*
+ * This config file is for the iriver H10 20Gb
+ */
+
+#define TARGET_TREE /* this target is using the target tree system */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 31
+#define MODEL_NAME   "Philips GoGear HDD1630"
+
+/* define this if you use an ATA controller */
+#define HAVE_ATA
+
+/* define this if you have recording possibility */
+/* #define HAVE_RECORDING */
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | SRC_CAP_FMRADIO)
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_44)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS  (SAMPR_CAP_44)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  128
+#define LCD_HEIGHT 128
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
+
+#ifndef BOOTLOADER
+/* Define this if your LCD can be enabled/disabled */
+/* #define HAVE_LCD_ENABLE */
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+ * should be defined as well.
+ * We can currently put the lcd to sleep but it won't wake up properly */
+/* #define HAVE_LCD_SLEEP */
+/* #define HAVE_LCD_SLEEP_SETTING */
+#endif
+
+/* define this if you can flip your LCD */
+/* #define HAVE_LCD_FLIP */
+
+/* define this if you can invert the colours on your LCD */
+/* #define HAVE_LCD_INVERT */
+
+/* #define IRAM_LCDFRAMEBUFFER IDATA_ATTR *//* put the lcd frame buffer in IRAM */
+
+#define CONFIG_KEYPAD PHILIPS_HDD1630_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#ifndef BOOTLOADER
+/* #define CONFIG_RTC RTC_E8564 */
+/* #define HAVE_RTC_ALARM */
+#endif
+
+/* Define this if you have a software controlled poweroff */
+/* #define HAVE_SW_POWEROFF */
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x80000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8731 audio codec */
+#define HAVE_WM8731
+
+/* WM8731 has no tone controls, so we use the software ones */
+#define HAVE_SW_TONE_CONTROLS
+
+#define AB_REPEAT_ENABLE 1
+
+/* FM Tuner */
+/* #define CONFIG_TUNER TEA5767 */
+/* #define CONFIG_TUNER_XTAL  32768 */
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+/* #define HAVE_BACKLIGHT_BRIGHTNESS */
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING     12
+#define DEFAULT_BRIGHTNESS_SETTING  6
+
+/* define this if you have a light associated with the buttons */
+/* #define HAVE_BUTTON_LIGHT */
+
+#define AB_REPEAT_ENABLE 1
+
+#define BATTERY_CAPACITY_DEFAULT 1550 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 1500  /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 50   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* Hardware controlled charging */
+/* #define CONFIG_CHARGING CHARGING_SIMPLE */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5020 */
+#define CONFIG_CPU PP5022
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x100000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      75000000
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_HDD1630
+
+/* Define this if your LCD can set contrast */
+#define HAVE_LCD_CONTRAST
+
+#define MIN_CONTRAST_SETTING        0
+#define MAX_CONTRAST_SETTING        30
+#define DEFAULT_CONTRAST_SETTING    14 /* Match boot contrast */
+
+/* We're able to shut off power to the HDD */
+/* #define HAVE_ATA_POWER_OFF */
+
+/* Offset ( in the firmware file's header ) to the file CRC and data. These are
+   only used when loading the old format rockbox.e200 file */
+#define FIRMWARE_OFFSET_FILE_CRC    0x0
+#define FIRMWARE_OFFSET_FILE_DATA   0x8
+
+/* #define USB_IPODSTYLE */
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+#define USB_VENDOR_ID 0x0471
+#define USB_PRODUCT_ID 0x014C
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define MI4_FORMAT
+#define BOOTFILE_EXT    "mi4"
+#define BOOTFILE        "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#endif
diff --git a/firmware/export/config.h b/firmware/export/config.h
index 34d0bf27c6..1a6e5d6894 100644
--- a/firmware/export/config.h
+++ b/firmware/export/config.h
@@ -85,6 +85,7 @@
 #define CREATIVEZV_PAD     26
 #define PHILIPS_SA9200_PAD 27
 #define SANSA_C100_PAD     28
+#define PHILIPS_HDD1630_PAD 29
 
 /* CONFIG_REMOTE_KEYPAD */
 #define H100_REMOTE 1
@@ -125,6 +126,7 @@
 #define LCD_COWOND2  24 /* as used by Cowon D2 - LTV250QV, TCC7801 driver */
 #define LCD_SA9200   25 /* as used by the Philips SA9200 */
 #define LCD_S6B33B2  26 /* as used by the Sansa c100 */
+#define LCD_HDD1630  27 /* as used by the Philips HDD1630 */
 
 /* LCD_PIXELFORMAT */
 #define HORIZONTAL_PACKING 1
@@ -265,6 +267,8 @@
 #include "config-creativezv.h"
 #elif defined(PHILIPS_SA9200)
 #include "config-sa9200.h"
+#elif defined(PHILIPS_HDD1630)
+#include "config-hdd1630.h"
 #elif defined(SANSA_C100)
 #include "config-c100.h"
 #else
diff --git a/firmware/export/usb.h b/firmware/export/usb.h
index 0590f702c5..05ea84148a 100644
--- a/firmware/export/usb.h
+++ b/firmware/export/usb.h
@@ -64,6 +64,9 @@ enum {
       (CONFIG_KEYPAD == PHILIPS_SA9200_PAD)
 #define USBPOWER_BUTTON BUTTON_SELECT
 #define USBPOWER_BTN_IGNORE BUTTON_POWER
+#elif CONFIG_KEYPAD == PHILIPS_HDD1630_PAD
+#define USBPOWER_BUTTON BUTTON_PLAYLIST
+#define USBPOWER_BTN_IGNORE BUTTON_POWER
 #endif
 #endif /* HAVE_USB_POWER */