diff options
Diffstat (limited to 'firmware/export/config/mpiohd300.h')
-rw-r--r-- | firmware/export/config/mpiohd300.h | 186 |
1 files changed, 186 insertions, 0 deletions
diff --git a/firmware/export/config/mpiohd300.h b/firmware/export/config/mpiohd300.h new file mode 100644 index 0000000000..37f79b4d47 --- /dev/null +++ b/firmware/export/config/mpiohd300.h | |||
@@ -0,0 +1,186 @@ | |||
1 | /* | ||
2 | * This config file is for MPIO HD200 | ||
3 | */ | ||
4 | #define TARGET_TREE /* this target is using the target tree system */ | ||
5 | |||
6 | /* For Rolo and boot loader */ | ||
7 | #define MODEL_NUMBER 70 | ||
8 | |||
9 | #define MODEL_NAME "MPIO HD300" | ||
10 | |||
11 | /* define this if you use an ATA controller */ | ||
12 | #define CONFIG_STORAGE STORAGE_ATA | ||
13 | #define HAVE_LBA48 | ||
14 | #define ATA_SWAP_WORDS | ||
15 | |||
16 | /* define this if you have recording possibility */ | ||
17 | #define HAVE_RECORDING | ||
18 | |||
19 | /* Define bitmask of input sources - recordable bitmask can be defined | ||
20 | * explicitly if different | ||
21 | */ | ||
22 | #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FMRADIO) | ||
23 | |||
24 | /* define the bitmask of hardware sample rates */ | ||
25 | #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) | ||
26 | |||
27 | /* define the bitmask of recording sample rates */ | ||
28 | #define REC_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11) | ||
29 | |||
30 | /* define this if you have a bitmap LCD display */ | ||
31 | #define HAVE_LCD_BITMAP | ||
32 | |||
33 | /* define this if you want album art for this target */ | ||
34 | #define HAVE_ALBUMART | ||
35 | |||
36 | /* define this to enable bitmap scaling */ | ||
37 | #define HAVE_BMP_SCALING | ||
38 | |||
39 | /* define this to enable JPEG decoding */ | ||
40 | #define HAVE_JPEG | ||
41 | |||
42 | /* define this if you can flip your LCD */ | ||
43 | #define HAVE_LCD_FLIP | ||
44 | |||
45 | /* define this if you can invert the colours on your LCD */ | ||
46 | #define HAVE_LCD_INVERT | ||
47 | |||
48 | /* define this if you have access to the quickscreen */ | ||
49 | /* #define HAVE_QUICKSCREEN */ | ||
50 | |||
51 | /* define this if you have access to the pitchscreen */ | ||
52 | #define HAVE_PITCHSCREEN | ||
53 | |||
54 | /* define this if you would like tagcache to build on this target */ | ||
55 | #define HAVE_TAGCACHE | ||
56 | |||
57 | /* LCD dimensions */ | ||
58 | #define LCD_WIDTH 160 | ||
59 | #define LCD_HEIGHT 128 | ||
60 | #define LCD_DEPTH 2 | ||
61 | |||
62 | #define LCD_PIXELFORMAT VERTICAL_PACKING | ||
63 | |||
64 | /* Display colours, for screenshots and sim (0xRRGGBB) */ | ||
65 | #define LCD_DARKCOLOR 0x000000 | ||
66 | #define LCD_BRIGHTCOLOR 0x5a915a | ||
67 | #define LCD_BL_DARKCOLOR 0x000000 | ||
68 | #define LCD_BL_BRIGHTCOLOR 0x82b4fa | ||
69 | |||
70 | #define CONFIG_KEYPAD MPIO_HD300_PAD | ||
71 | |||
72 | /* Define this if you do software codec */ | ||
73 | #define CONFIG_CODEC SWCODEC | ||
74 | |||
75 | /* Define this if you have RTC */ | ||
76 | #define CONFIG_RTC RTC_S35390A | ||
77 | |||
78 | #define CONFIG_LCD LCD_S1D15E06 | ||
79 | |||
80 | /* Define this for LCD backlight available */ | ||
81 | #define HAVE_BACKLIGHT | ||
82 | #define HAVE_BACKLIGHT_BRIGHTNESS | ||
83 | #define MIN_BRIGHTNESS_SETTING 0 | ||
84 | #define MAX_BRIGHTNESS_SETTING 31 | ||
85 | #define DEFAULT_BRIGHTNESS_SETTING 20 | ||
86 | |||
87 | |||
88 | /* define this if you have a disk storage, i.e. something | ||
89 | that needs spinups and can cause skips when shaked */ | ||
90 | #define HAVE_DISK_STORAGE | ||
91 | |||
92 | /* Define this if you have a software controlled poweroff */ | ||
93 | #define HAVE_SW_POWEROFF | ||
94 | |||
95 | /* The number of bytes reserved for loadable codecs */ | ||
96 | #define CODEC_SIZE 0x100000 | ||
97 | |||
98 | /* The number of bytes reserved for loadable plugins */ | ||
99 | #define PLUGIN_BUFFER_SIZE 0x80000 | ||
100 | |||
101 | /* FM Tuner | ||
102 | * turn off for now | ||
103 | */ | ||
104 | #define CONFIG_TUNER TEA5767 | ||
105 | #define CONFIG_TUNER_XTAL 32768 | ||
106 | |||
107 | |||
108 | /* we have WM8750 codec in I2S master mode */ | ||
109 | #define HAVE_WM8750 | ||
110 | |||
111 | /* clocking setup based on 11.2896 MHz master clock | ||
112 | * provided to the codec by MCU | ||
113 | * WM8750L Datasheet Table 40, page 46 | ||
114 | */ | ||
115 | #define CODEC_SRCTRL_11025HZ (0x18 << 1) | ||
116 | #define CODEC_SRCTRL_22050HZ (0x1A << 1) | ||
117 | #define CODEC_SRCTRL_44100HZ (0x10 << 1) | ||
118 | #define CODEC_SRCTRL_88200HZ (0x1E << 1) | ||
119 | |||
120 | /* copied from HD200 for now needs calibration */ | ||
121 | #define BATTERY_TYPES_COUNT 1 | ||
122 | #define BATTERY_CAPACITY_DEFAULT 850 /* this is wild guess */ | ||
123 | #define BATTERY_CAPACITY_MIN 800 /* min. capacity selectable */ | ||
124 | #define BATTERY_CAPACITY_MAX 2500 /* max. capacity selectable */ | ||
125 | #define BATTERY_CAPACITY_INC 50 /* capacity increment */ | ||
126 | |||
127 | #define CURRENT_NORMAL 68 /* measured during playback unboosted */ | ||
128 | #define CURRENT_BACKLIGHT 24 /* measured */ | ||
129 | #define CURRENT_RECORD 40 /* additional current while recording */ | ||
130 | #define CURRENT_ATA 100 /* additional current when ata system is ON */ | ||
131 | /* #define CURRENT_REMOTE 0 additional current when remote connected */ | ||
132 | |||
133 | #define CONFIG_CHARGING CHARGING_MONITOR | ||
134 | |||
135 | #ifndef SIMULATOR | ||
136 | |||
137 | /* Define this if your LCD can set contrast */ | ||
138 | #define HAVE_LCD_CONTRAST | ||
139 | |||
140 | /* Define this if you have a Motorola SCF5249 */ | ||
141 | #define CONFIG_CPU MCF5249 | ||
142 | |||
143 | /* Define this if you want to use coldfire's i2c interface */ | ||
144 | #define CONFIG_I2C I2C_COLDFIRE | ||
145 | |||
146 | /* define this if the hardware can be powered off while charging */ | ||
147 | /* #define HAVE_POWEROFF_WHILE_CHARGING */ | ||
148 | |||
149 | /* The size of the flash ROM */ | ||
150 | #define FLASH_SIZE 0x200000 | ||
151 | |||
152 | /* Define this to the CPU frequency */ | ||
153 | #define CPU_FREQ 11289600 | ||
154 | |||
155 | /* Define this if you have ATA power-off control */ | ||
156 | #define HAVE_ATA_POWER_OFF | ||
157 | |||
158 | /* Offset ( in the firmware file's header ) to the file length */ | ||
159 | #define FIRMWARE_OFFSET_FILE_LENGTH 0 | ||
160 | |||
161 | /* Offset ( in the firmware file's header ) to the file CRC */ | ||
162 | #define FIRMWARE_OFFSET_FILE_CRC 0 | ||
163 | |||
164 | /* Offset ( in the firmware file's header ) to the real data */ | ||
165 | #define FIRMWARE_OFFSET_FILE_DATA 8 | ||
166 | |||
167 | /* Define this if you have adjustable CPU frequency */ | ||
168 | #define HAVE_ADJUSTABLE_CPU_FREQ | ||
169 | |||
170 | #define BOOTFILE_EXT "mpio" | ||
171 | #define BOOTFILE "rockbox." BOOTFILE_EXT | ||
172 | #define BOOTDIR "/.rockbox" | ||
173 | |||
174 | #define BOOTLOADER_ENTRYPOINT 0x001F0000 | ||
175 | #define FLASH_ENTRYPOINT 0x00001000 | ||
176 | #define FLASH_MAGIC 0xfbfbfbf1 | ||
177 | |||
178 | #endif /* SIMULATOR */ | ||
179 | |||
180 | /** Port-specific settings **/ | ||
181 | |||
182 | #define MIN_CONTRAST_SETTING 20 | ||
183 | #define MAX_CONTRAST_SETTING 32 | ||
184 | #define DEFAULT_CONTRAST_SETTING 24 | ||
185 | |||
186 | #define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */ | ||