1 files changed, 214 insertions, 0 deletions

diff --git a/firmware/export/config/iriverh120.h b/firmware/export/config/iriverh120.h
new file mode 100644
index 0000000000..da75c60ecf
--- /dev/null
+++ b/firmware/export/config/iriverh120.h
@@ -0,0 +1,214 @@
+#define TARGET_TREE /* this target is using the target tree system */
+/*
+ * This config file is for iriver H120 and H140
+ */
+#define IRIVER_H100_SERIES 1
+
+#define MODEL_NAME "iriver H120/H140"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 0
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you can flip your LCD */
+#define HAVE_LCD_FLIP
+
+/* define this if you can invert the colours on your LCD */
+#define HAVE_LCD_INVERT
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  160
+#define LCD_HEIGHT 128
+#define LCD_DEPTH  2
+
+#define LCD_PIXELFORMAT VERTICAL_PACKING
+
+/* Display colours, for screenshots and sim (0xRRGGBB) */
+#define LCD_DARKCOLOR       0x000000
+#define LCD_BRIGHTCOLOR     0x5a915a
+#define LCD_BL_DARKCOLOR    0x000000
+#define LCD_BL_BRIGHTCOLOR  0xadd8e6
+
+/* remote LCD */
+#define LCD_REMOTE_WIDTH  128
+#define LCD_REMOTE_HEIGHT 64
+#define LCD_REMOTE_DEPTH  1
+
+#define LCD_REMOTE_PIXELFORMAT VERTICAL_PACKING
+
+/* Remote display colours, for screenshots and sim (0xRRGGBB) */
+#define LCD_REMOTE_DARKCOLOR       0x000000
+#define LCD_REMOTE_BRIGHTCOLOR     0x5a915a
+#define LCD_REMOTE_BL_DARKCOLOR    0x000000
+#define LCD_REMOTE_BL_BRIGHTCOLOR  0x82b4fa
+
+#define CONFIG_KEYPAD IRIVER_H100_PAD
+
+#define CONFIG_REMOTE_KEYPAD H100_REMOTE
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a disk storage, i.e. something
+   that needs spinups and can cause skips when shaked */
+#define HAVE_DISK_STORAGE
+
+/* Define this if you have an remote lcd */
+#define HAVE_REMOTE_LCD
+
+/* Define if we have a hardware defect that causes ticking on the audio line */
+#define HAVE_REMOTE_LCD_TICKING
+
+#define CONFIG_LCD LCD_S1D15E06
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+
+/* We can fade the backlight by using PWM */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+#define AB_REPEAT_ENABLE 1
+
+#define CONFIG_TUNER TEA5767
+#define CONFIG_TUNER_XTAL 32768
+
+#define HAVE_UDA1380
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN | \
+                        SRC_CAP_FMRADIO | SRC_CAP_SPDIF)
+
+/* define hardware samples rate caps mask */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS  (SAMPR_CAP_44 | SAMPR_CAP_22 | SAMPR_CAP_11)
+
+#define HAVE_AGC
+
+#define BATTERY_CAPACITY_DEFAULT 1300 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN 1300 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX 3200 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC 50   /* capacity increment */
+#define BATTERY_TYPES_COUNT  1    /* only one type */
+
+/* Hardware controlled charging */
+#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define current usage levels */
+#define CURRENT_NORMAL     80  /* 16h playback on 1300mAh battery */
+#define CURRENT_BACKLIGHT  23  /* from IriverBattery twiki page */
+#define CURRENT_SPDIF_OUT  10  /* optical SPDIF output on */
+#define CURRENT_RECORD    105  /* additional current while recording */
+#define CURRENT_REMOTE      8  /* additional current when remote connected */
+
+#ifndef SIMULATOR
+
+/* Define this if you have a Motorola SCF5249 */
+#define CONFIG_CPU MCF5249
+
+/* Define this if you want to use coldfire's i2c interface */
+#define CONFIG_I2C I2C_COLDFIRE
+
+/* Define this if you can run rockbox from flash memory */
+#define HAVE_FLASHED_ROCKBOX
+
+/* define this if the hardware can be powered off while charging */
+#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x200000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      11289600
+
+/* Define this if you have ATA power-off control */
+#define HAVE_ATA_POWER_OFF
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#define HAVE_ATA_LED_CTRL
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+#define BOOTFILE_EXT "iriver"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define BOOTLOADER_ENTRYPOINT  0x001F0000
+#define FLASH_RAMIMAGE_ENTRY   0x00001000
+#define FLASH_ROMIMAGE_ENTRY   0x00100000
+#define FLASH_MAGIC            0xfbfbfbf2
+
+/* Define this if there is an EEPROM chip */
+#define HAVE_EEPROM
+
+/* Define this if the EEPROM chip is used */
+#define HAVE_EEPROM_SETTINGS
+
+#endif /* !SIMULATOR */
+
+/* Define this for S/PDIF output available */
+#define HAVE_SPDIF_OUT
+
+/* Define this if you can control the S/PDIF power */
+#define HAVE_SPDIF_POWER
+
+/* Define this if you have a serial port */
+/*#define HAVE_SERIAL*/
+
+/** Port-specific settings **/
+
+#define HAVE_LCD_CONTRAST
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_CONTRAST_SETTING        14 /* White screen a bit higher than this */
+#define MAX_CONTRAST_SETTING        63 /* Black screen a bit lower than this */
+#define DEFAULT_CONTRAST_SETTING    27
+
+/* Remote LCD contrast range and defaults */
+#define MIN_REMOTE_CONTRAST_SETTING     5
+#define MAX_REMOTE_CONTRAST_SETTING     63
+#define DEFAULT_REMOTE_CONTRAST_SETTING 42
+
+#define IRAM_LCDFRAMEBUFFER IBSS_ATTR /* put the lcd frame buffer in IRAM */