1 files changed, 190 insertions, 0 deletions

diff --git a/firmware/export/config/ipodnano1g.h b/firmware/export/config/ipodnano1g.h
new file mode 100644
index 0000000000..8483f56613
--- /dev/null
+++ b/firmware/export/config/ipodnano1g.h
@@ -0,0 +1,190 @@
+/*
+ * This config file is for the Apple iPod Nano
+ */
+#define TARGET_TREE /* this target is using the target tree system */
+
+#define IPOD_ARCH 1
+
+#define MODEL_NAME   "Apple iPod Nano 1g"
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 4
+
+/* define this if you use an ATA controller */
+#define CONFIG_STORAGE STORAGE_ATA
+
+/* define this if you have recording possibility */
+#define HAVE_RECORDING
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+#define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_LINEIN)
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_44)
+
+/* define the bitmask of recording sample rates */
+#define REC_SAMPR_CAPS  (SAMPR_CAP_44)
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+/* define this if you have access to the pitchscreen */
+#define HAVE_PITCHSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* LCD dimensions */
+#define LCD_WIDTH  176
+#define LCD_HEIGHT 132
+#define LCD_DEPTH  16   /* 65536 colours */
+#define LCD_PIXELFORMAT RGB565SWAPPED /* rgb565 byte-swapped */
+
+/* LCD stays visible without backlight - simulator hint */
+#define HAVE_TRANSFLECTIVE_LCD
+
+#define CONFIG_KEYPAD IPOD_4G_PAD
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+#define CONFIG_RTC RTC_PCF50605
+
+/* Define if the device can wake from an RTC alarm */
+#define HAVE_RTC_ALARM
+
+/* Define this if you can switch on/off the accessory power supply */
+#define HAVE_ACCESSORY_SUPPLY
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* Define this if you have the WM8975 audio codec */
+#define HAVE_WM8975
+
+#define AB_REPEAT_ENABLE 1
+#define ACTION_WPSAB_SINGLE ACTION_WPS_BROWSE
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+/* We can fade the backlight by using PWM */
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_PWM
+
+/* Main LCD backlight brightness range and defaults */
+#define MIN_BRIGHTNESS_SETTING      1
+#define MAX_BRIGHTNESS_SETTING      32
+#define DEFAULT_BRIGHTNESS_SETTING  16
+
+/* define this if the unit uses a scrollwheel for navigation */
+#define HAVE_SCROLLWHEEL
+/* define to activate advanced wheel acceleration code */
+#define HAVE_WHEEL_ACCELERATION
+/* define from which rotation speed [degree/sec] on the acceleration starts */
+#define WHEEL_ACCEL_START 270
+/* define type of acceleration (1 = ^2, 2 = ^3, 3 = ^4) */
+#define WHEEL_ACCELERATION 3
+
+/* Define this if you can detect headphones */
+#define HAVE_HEADPHONE_DETECTION
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+#define BATTERY_CAPACITY_DEFAULT 300   /* default battery capacity */
+#define BATTERY_CAPACITY_MIN     200   /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX     600   /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC      20    /* capacity increment */
+#define BATTERY_TYPES_COUNT        1   /* only one type */
+
+/* Hardware controlled charging? FIXME */
+//#define CONFIG_CHARGING CHARGING_SIMPLE
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+#define CURRENT_NORMAL     32  /* MP3: ~9h playback out of 300mAh battery */
+#define CURRENT_BACKLIGHT  20  /* FIXME: this needs adjusting */
+#if defined(HAVE_RECORDING)
+#define CURRENT_RECORD     35  /* FIXME: this needs adjusting */
+#endif
+
+#ifndef SIMULATOR
+
+/* Define this if you have a PortalPlayer PP5022 */
+#define CONFIG_CPU PP5022
+
+/* Define this if you want to use the PP5020 i2c interface */
+#define CONFIG_I2C I2C_PP5020
+
+/* define this if the hardware can be powered off while charging */
+//#define HAVE_POWEROFF_WHILE_CHARGING
+
+/* The start address index for ROM builds */
+#define ROM_START 0x00000000
+
+/* The size of the flash ROM */
+#define FLASH_SIZE 0x100000
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ      24000000
+
+#define CONFIG_LCD LCD_IPODNANO
+
+/* Offset ( in the firmware file's header ) to the file length */
+#define FIRMWARE_OFFSET_FILE_LENGTH 0
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_ARC
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+/*Disable USB for the release due to charging issues */
+/*#define USE_ROCKBOX_USB*/
+#define USB_VENDOR_ID 0x05ac
+#define USB_PRODUCT_ID 0x120a
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+/* Define this if you can read an absolute wheel position */
+#define HAVE_WHEEL_POSITION
+
+#define BOOTFILE_EXT "ipod"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+#define ICODE_ATTR_TREMOR_NOT_MDCT
+
+#define IPOD_ACCESSORY_PROTOCOL
+#define HAVE_SERIAL
+
+#endif