1 files changed, 198 insertions, 0 deletions

diff --git a/firmware/export/config/ihifi800.h b/firmware/export/config/ihifi800.h
new file mode 100644
index 0000000000..eb1c2015ad
--- /dev/null
+++ b/firmware/export/config/ihifi800.h
@@ -0,0 +1,198 @@
+/*
+ * This config file is for IHIFI 800
+ */
+
+/* For Rolo and boot loader */
+#define MODEL_NUMBER 109
+
+#define MODEL_NAME   "IHIFI 800"
+
+/* Define bitmask of input sources - recordable bitmask can be defined
+   explicitly if different */
+/* #define INPUT_SRC_CAPS (SRC_CAP_MIC | SRC_CAP_FM) */
+
+/* define the bitmask of hardware sample rates */
+#define HW_SAMPR_CAPS   (SAMPR_CAP_96 | SAMPR_CAP_48 | SAMPR_CAP_44 | \
+                         SAMPR_CAP_32 | SAMPR_CAP_24 | SAMPR_CAP_22 | \
+                         SAMPR_CAP_16 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8)
+
+#define HAVE_ES9018
+#define CODEC_SLAVE
+
+/* define this if you have a bitmap LCD display */
+#define HAVE_LCD_BITMAP
+
+/* define this if you can flip your LCD */
+/* #define HAVE_LCD_FLIP */
+
+/* define this if you have a colour LCD */
+#define HAVE_LCD_COLOR
+
+/* define this if you want album art for this target */
+#define HAVE_ALBUMART
+
+/* define this to enable bitmap scaling */
+#define HAVE_BMP_SCALING
+
+/* define this to enable JPEG decoding */
+#define HAVE_JPEG
+
+/* define this if you can invert the colours on your LCD */
+/* #define HAVE_LCD_INVERT */
+
+/* define this if you have access to the quickscreen */
+#define HAVE_QUICKSCREEN
+
+/* define this if you would like tagcache to build on this target */
+#define HAVE_TAGCACHE
+
+/* define this if you have a flash memory storage */
+#define HAVE_FLASH_STORAGE
+
+#define CONFIG_STORAGE (STORAGE_SD | STORAGE_NAND)
+
+#define CONFIG_NAND NAND_RK27XX
+#define HAVE_SW_TONE_CONTROLS
+
+#define HAVE_HOTSWAP
+
+#define NUM_DRIVES 1
+#define SECTOR_SIZE 512
+
+/* for small(ish) SD cards */
+#define HAVE_FAT16SUPPORT
+
+/* LCD dimensions */
+#define LCD_WIDTH  240
+#define LCD_HEIGHT 320
+/* sqrt(240^2 + 320^2) / 2.4 = 166.7 */
+#define LCD_DPI 167
+#define LCD_DEPTH  16   /* pseudo 262.144 colors */
+#define LCD_PIXELFORMAT RGB565 /* rgb565 */
+
+/* Define this if the LCD can shut down */
+/* #define HAVE_LCD_SHUTDOWN */
+
+/* Define this if your LCD can be enabled/disabled */
+#define HAVE_LCD_ENABLE
+
+/* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE
+   should be defined as well. */
+#ifndef BOOTLOADER
+/* TODO: #define HAVE_LCD_SLEEP */
+/* TODO: #define HAVE_LCD_SLEEP_SETTING */
+#endif
+
+#define CONFIG_KEYPAD IHIFI_800_PAD
+
+/* define this if the target has volume keys which can be used in the lists */
+#define HAVE_VOLUME_IN_LIST
+
+/* Define this if a programmable hotkey is mapped */
+/* #define HAVE_HOTKEY */
+
+/* Define this if you do software codec */
+#define CONFIG_CODEC SWCODEC
+
+/* define this if you have a real-time clock */
+/* #define CONFIG_RTC RTC_NANO2G */
+
+/* Define if the device can wake from an RTC alarm */
+/* #define HAVE_RTC_ALARM */
+
+/* Define the type of audio codec */
+/*#define HAVE_RK27XX_CODEC */
+
+/* #define HAVE_PCM_DMA_ADDRESS */
+
+/* Define this for LCD backlight available */
+#define HAVE_BACKLIGHT
+#define HAVE_BACKLIGHT_BRIGHTNESS
+#define MIN_BRIGHTNESS_SETTING      0
+#define MAX_BRIGHTNESS_SETTING      31
+#define DEFAULT_BRIGHTNESS_SETTING  31
+#define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_SW_HW_REG
+
+/* Define this if you have a software controlled poweroff */
+#define HAVE_SW_POWEROFF
+
+/* The number of bytes reserved for loadable codecs */
+#define CODEC_SIZE 0x100000
+
+/* The number of bytes reserved for loadable plugins */
+#define PLUGIN_BUFFER_SIZE 0x80000
+
+/* TODO: Figure out real values */
+#define BATTERY_CAPACITY_DEFAULT 1400 /* default battery capacity */
+#define BATTERY_CAPACITY_MIN      700 /* min. capacity selectable */
+#define BATTERY_CAPACITY_MAX     1400 /* max. capacity selectable */
+#define BATTERY_CAPACITY_INC       10 /* capacity increment */
+#define BATTERY_TYPES_COUNT         1 /* only one type */
+
+#define CONFIG_BATTERY_MEASURE VOLTAGE_MEASURE
+
+/* Hardware controlled charging with monitoring */
+#define CONFIG_CHARGING CHARGING_MONITOR
+
+/* define current usage levels */
+/* TODO: #define CURRENT_NORMAL
+ * TODO: #define CURRENT_BACKLIGHT  23
+ */
+
+/* define this if the unit can be powered or charged via USB */
+#define HAVE_USB_POWER
+
+/* Define this if your LCD can set contrast */
+/* #define HAVE_LCD_CONTRAST */
+
+/* Offset ( in the firmware file's header ) to the file CRC */
+#define FIRMWARE_OFFSET_FILE_CRC 0
+
+/* Offset ( in the firmware file's header ) to the real data */
+#define FIRMWARE_OFFSET_FILE_DATA 8
+
+#define STORAGE_NEEDS_ALIGN
+
+/* Define this if you have adjustable CPU frequency */
+#define HAVE_ADJUSTABLE_CPU_FREQ
+
+/* Virtual LED (icon) */
+#define CONFIG_LED LED_VIRTUAL
+
+/** Non-simulator section **/
+#ifndef SIMULATOR
+
+/* The exact type of CPU */
+#define CONFIG_CPU RK27XX
+
+/* Define this to the CPU frequency */
+#define CPU_FREQ        200000000
+
+/* I2C interface */
+#define CONFIG_I2C I2C_RK27XX
+
+/* define this if the hardware can be powered off while charging */
+/* #define HAVE_POWEROFF_WHILE_CHARGING */
+
+/* Type of LCD */
+#define CONFIG_LCD LCD_IHIFI800
+
+/* USB On-the-go */
+#define CONFIG_USBOTG USBOTG_RK27XX
+
+/* enable these for the experimental usb stack */
+#define HAVE_USBSTACK
+
+#define USB_VENDOR_ID 0x071b
+#define USB_PRODUCT_ID 0x3202
+#define HAVE_BOOTLOADER_USB_MODE
+
+#define RKW_FORMAT
+#define BOOTFILE_EXT "rkw"
+#define BOOTFILE "rockbox." BOOTFILE_EXT
+#define BOOTDIR "/.rockbox"
+
+/* disabled for now */
+#undef HAVE_HOTSWAP
+
+#endif /* SIMULATOR */