diff options
Diffstat (limited to 'firmware/export/config/gigabeats.h')
-rw-r--r-- | firmware/export/config/gigabeats.h | 216 |
1 files changed, 216 insertions, 0 deletions
diff --git a/firmware/export/config/gigabeats.h b/firmware/export/config/gigabeats.h new file mode 100644 index 0000000000..7f55797a07 --- /dev/null +++ b/firmware/export/config/gigabeats.h | |||
@@ -0,0 +1,216 @@ | |||
1 | /* | ||
2 | * This config file is for toshiba Gigabeat S | ||
3 | */ | ||
4 | |||
5 | #define TARGET_TREE /* this target is using the target tree system */ | ||
6 | |||
7 | #define TOSHIBA_GIGABEAT_S 1 | ||
8 | |||
9 | #define MODEL_NAME "Toshiba Gigabeat S" | ||
10 | |||
11 | /* For Rolo and boot loader */ | ||
12 | #define MODEL_NUMBER 21 | ||
13 | |||
14 | /* define this if you use an ATA controller */ | ||
15 | #define CONFIG_STORAGE STORAGE_ATA | ||
16 | |||
17 | /* define this if you have a bitmap LCD display */ | ||
18 | #define HAVE_LCD_BITMAP | ||
19 | |||
20 | /* define this if you have a colour LCD */ | ||
21 | #define HAVE_LCD_COLOR | ||
22 | |||
23 | /* define this if you want album art for this target */ | ||
24 | #define HAVE_ALBUMART | ||
25 | |||
26 | /* define this to enable bitmap scaling */ | ||
27 | #define HAVE_BMP_SCALING | ||
28 | |||
29 | /* define this to enable JPEG decoding */ | ||
30 | #define HAVE_JPEG | ||
31 | |||
32 | /* define this if you have access to the quickscreen */ | ||
33 | #define HAVE_QUICKSCREEN | ||
34 | |||
35 | /* define this if you have access to the pitchscreen */ | ||
36 | #define HAVE_PITCHSCREEN | ||
37 | |||
38 | /* define this if you would like tagcache to build on this target */ | ||
39 | #define HAVE_TAGCACHE | ||
40 | |||
41 | /* define this if the target has volume keys which can be used in the lists */ | ||
42 | #define HAVE_VOLUME_IN_LIST | ||
43 | |||
44 | /* LCD dimensions */ | ||
45 | #define LCD_WIDTH 240 | ||
46 | #define LCD_HEIGHT 320 | ||
47 | #define LCD_DEPTH 16 /* 65k colours */ | ||
48 | #define LCD_PIXELFORMAT RGB565 /* rgb565 */ | ||
49 | |||
50 | #define CONFIG_KEYPAD GIGABEAT_S_PAD | ||
51 | |||
52 | /* Define this to enable morse code input */ | ||
53 | #define HAVE_MORSE_INPUT | ||
54 | |||
55 | /* Define this if you do software codec */ | ||
56 | #define CONFIG_CODEC SWCODEC | ||
57 | |||
58 | /* define this if you have a real-time clock */ | ||
59 | #define CONFIG_RTC RTC_MC13783 | ||
60 | |||
61 | /* Define if the device can wake from an RTC alarm */ | ||
62 | #define HAVE_RTC_ALARM | ||
63 | |||
64 | /* Define this for LCD backlight available */ | ||
65 | #define HAVE_BACKLIGHT | ||
66 | |||
67 | /* define this if you have a disk storage, i.e. something | ||
68 | that needs spinups and can cause skips when shaked */ | ||
69 | #define HAVE_DISK_STORAGE | ||
70 | |||
71 | /* Define this if you have a software controlled poweroff */ | ||
72 | #define HAVE_SW_POWEROFF | ||
73 | |||
74 | /* The number of bytes reserved for loadable codecs */ | ||
75 | #define CODEC_SIZE 0x100000 | ||
76 | |||
77 | /* The number of bytes reserved for loadable plugins */ | ||
78 | #define PLUGIN_BUFFER_SIZE 0x80000 | ||
79 | |||
80 | /* Define this if you have a SI4700 fm radio tuner */ | ||
81 | #define CONFIG_TUNER SI4700 | ||
82 | |||
83 | /* Define this if you have the WM8978 audio codec */ | ||
84 | #define HAVE_WM8978 | ||
85 | |||
86 | /* Define bitmask of input sources - recordable bitmask can be defined | ||
87 | explicitly if different */ | ||
88 | #define INPUT_SRC_CAPS SRC_CAP_FMRADIO | ||
89 | |||
90 | /* define the bitmask of hardware sample rates */ | ||
91 | #define HW_SAMPR_CAPS (SAMPR_CAP_48 | SAMPR_CAP_44 | SAMPR_CAP_32 | \ | ||
92 | SAMPR_CAP_24 | SAMPR_CAP_22 | SAMPR_CAP_16 | \ | ||
93 | SAMPR_CAP_12 | SAMPR_CAP_11 | SAMPR_CAP_8) | ||
94 | |||
95 | /* define the bitmask of recording sample rates */ | ||
96 | #define REC_SAMPR_CAPS HW_SAMPR_CAPS /* Same as playback */ | ||
97 | |||
98 | /* define default recording levels */ | ||
99 | #define DEFAULT_REC_LEFT_GAIN 0 | ||
100 | #define DEFAULT_REC_RIGHT_GAIN 0 | ||
101 | |||
102 | /* Define this if you have recording capability */ | ||
103 | #define HAVE_RECORDING | ||
104 | |||
105 | /* Define this if your LCD can be put to sleep. */ | ||
106 | #define HAVE_LCD_SLEEP | ||
107 | /* We don't use a setting but a fixed delay after the backlight has | ||
108 | * turned off */ | ||
109 | #define LCD_SLEEP_TIMEOUT (2*HZ) | ||
110 | |||
111 | /* Define this if your LCD can be enabled/disabled */ | ||
112 | #define HAVE_LCD_ENABLE | ||
113 | |||
114 | #ifndef BOOTLOADER | ||
115 | |||
116 | #define HAVE_BACKLIGHT_BRIGHTNESS | ||
117 | |||
118 | /* Main LCD backlight brightness range and defaults */ | ||
119 | #define MIN_BRIGHTNESS_SETTING 1 | ||
120 | #define MAX_BRIGHTNESS_SETTING 24 | ||
121 | #define DEFAULT_BRIGHTNESS_SETTING 12 | ||
122 | |||
123 | /* Implementation-defined fading type with bool settings */ | ||
124 | #define CONFIG_BACKLIGHT_FADING BACKLIGHT_FADING_TARGET | ||
125 | |||
126 | #define HAVE_HEADPHONE_DETECTION | ||
127 | #endif /* BOOTLOADER */ | ||
128 | |||
129 | #define CONFIG_CPU IMX31L | ||
130 | |||
131 | /* Define this if you want to use imx31l's i2c interface */ | ||
132 | #define CONFIG_I2C I2C_IMX31L | ||
133 | |||
134 | /* Define the bitmask of modules used */ | ||
135 | #define SPI_MODULE_MASK (USE_CSPI2_MODULE) | ||
136 | #define I2C_MODULE_MASK (USE_I2C1_MODULE | USE_I2C2_MODULE) | ||
137 | #define GPIO_EVENT_MASK (USE_GPIO1_EVENTS) | ||
138 | |||
139 | /* Define this if target has an additional number of threads specific to it */ | ||
140 | #define TARGET_EXTRA_THREADS 2 | ||
141 | |||
142 | /* Type of mobile power - check this out */ | ||
143 | #define BATTERY_CAPACITY_DEFAULT 700 /* default battery capacity */ | ||
144 | #define BATTERY_CAPACITY_MIN 700 /* min. capacity selectable */ | ||
145 | #define BATTERY_CAPACITY_MAX 1200 /* max. capacity selectable */ | ||
146 | #define BATTERY_CAPACITY_INC 25 /* capacity increment */ | ||
147 | #define BATTERY_TYPES_COUNT 1 /* only one type */ | ||
148 | |||
149 | /* TODO: have a proper status displayed in the bootloader and have it | ||
150 | * work! */ | ||
151 | /* Charing implemented in a target-specific algorithm */ | ||
152 | #define CONFIG_CHARGING CHARGING_TARGET | ||
153 | |||
154 | /* define this if the hardware can be powered off while charging */ | ||
155 | #define HAVE_POWEROFF_WHILE_CHARGING | ||
156 | |||
157 | /* The size of the flash ROM */ | ||
158 | #define FLASH_SIZE 0x200000 | ||
159 | |||
160 | /* Define this to the CPU frequency */ | ||
161 | /* TODO */ | ||
162 | #define CPU_FREQ 264000000 /* Set by retailOS loader */ | ||
163 | |||
164 | /* define this if the unit can be powered or charged via USB */ | ||
165 | #define HAVE_USB_POWER | ||
166 | #define USBPOWER_BUTTON BUTTON_MENU | ||
167 | #define USBPOWER_BTN_IGNORE BUTTON_POWER | ||
168 | |||
169 | /* define this if the unit has a battery switch or battery can be removed | ||
170 | * when running */ | ||
171 | #define HAVE_BATTERY_SWITCH | ||
172 | |||
173 | /* USB On-the-go */ | ||
174 | #define CONFIG_USBOTG USBOTG_ARC | ||
175 | |||
176 | /* enable these for the usb stack */ | ||
177 | #define USE_ROCKBOX_USB | ||
178 | #define HAVE_USBSTACK | ||
179 | /* usb stack and driver settings */ | ||
180 | #define USB_PORTSCX_PHY_TYPE PORTSCX_PTS_ULPI | ||
181 | #define USB_VENDOR_ID 0x0930 | ||
182 | #define USB_PRODUCT_ID 0x0010 | ||
183 | #define HAVE_USB_HID_MOUSE | ||
184 | |||
185 | /* Define this if you have ATA power-off control */ | ||
186 | #define HAVE_ATA_POWER_OFF | ||
187 | |||
188 | /* Define this to add support for ATA DMA */ | ||
189 | #define HAVE_ATA_DMA | ||
190 | |||
191 | #define CONFIG_LCD LCD_GIGABEAT | ||
192 | |||
193 | /* Offset ( in the firmware file's header ) to the file CRC */ | ||
194 | #define FIRMWARE_OFFSET_FILE_CRC 0 | ||
195 | |||
196 | /* Offset ( in the firmware file's header ) to the real data */ | ||
197 | #define FIRMWARE_OFFSET_FILE_DATA 8 | ||
198 | |||
199 | //#define HAVE_SERIAL | ||
200 | #define HAVE_VOLUME_IN_LIST | ||
201 | |||
202 | /*Remove Comments from UART_INT to enable the UART interrupts,*/ | ||
203 | /*otherwise iterrupts will be disabled. For now we will test */ | ||
204 | /*UART state by polling the registers, and if necessary update this */ | ||
205 | /*method by using the interrupts instead*/ | ||
206 | //#define UART_INT | ||
207 | |||
208 | /* Define this if you have adjustable CPU frequency */ | ||
209 | /* #define HAVE_ADJUSTABLE_CPU_FREQ */ | ||
210 | |||
211 | #define HAVE_PCM_DMA_ADDRESS | ||
212 | |||
213 | #define BOOTFILE_EXT "gigabeat" | ||
214 | #define BOOTFILE "rockbox." BOOTFILE_EXT | ||
215 | #define BOOTDIR "/.rockbox" | ||
216 | |||