diff options
Diffstat (limited to 'firmware/export/config/gigabeatfx.h')
-rw-r--r-- | firmware/export/config/gigabeatfx.h | 188 |
1 files changed, 188 insertions, 0 deletions
diff --git a/firmware/export/config/gigabeatfx.h b/firmware/export/config/gigabeatfx.h new file mode 100644 index 0000000000..363312a415 --- /dev/null +++ b/firmware/export/config/gigabeatfx.h | |||
@@ -0,0 +1,188 @@ | |||
1 | /* | ||
2 | * This config file is for toshiba Gigabeat F | ||
3 | */ | ||
4 | #define TARGET_TREE /* this target is using the target tree system */ | ||
5 | |||
6 | #define TOSHIBA_GIGABEAT_F 1 | ||
7 | |||
8 | #define MODEL_NAME "Toshiba Gigabeat F" | ||
9 | |||
10 | /* For Rolo and boot loader */ | ||
11 | #define MODEL_NUMBER 18 | ||
12 | |||
13 | /* define this if you use an ATA controller */ | ||
14 | #define CONFIG_STORAGE STORAGE_ATA | ||
15 | |||
16 | /* define this if you have a bitmap LCD display */ | ||
17 | #define HAVE_LCD_BITMAP | ||
18 | |||
19 | /* define this if you have a colour LCD */ | ||
20 | #define HAVE_LCD_COLOR | ||
21 | |||
22 | /* define this if you want album art for this target */ | ||
23 | #define HAVE_ALBUMART | ||
24 | |||
25 | /* define this to enable bitmap scaling */ | ||
26 | #define HAVE_BMP_SCALING | ||
27 | |||
28 | /* define this to enable JPEG decoding */ | ||
29 | #define HAVE_JPEG | ||
30 | |||
31 | /* define this if you have access to the quickscreen */ | ||
32 | #define HAVE_QUICKSCREEN | ||
33 | |||
34 | /* define this if you have access to the pitchscreen */ | ||
35 | #define HAVE_PITCHSCREEN | ||
36 | |||
37 | /* define this if you would like tagcache to build on this target */ | ||
38 | #define HAVE_TAGCACHE | ||
39 | |||
40 | /* define this if the target has volume keys which can be used in the lists */ | ||
41 | #define HAVE_VOLUME_IN_LIST | ||
42 | |||
43 | /* LCD dimensions */ | ||
44 | #define LCD_WIDTH 240 | ||
45 | #define LCD_HEIGHT 320 | ||
46 | #define LCD_DEPTH 16 /* 65k colours */ | ||
47 | #define LCD_PIXELFORMAT RGB565 /* rgb565 */ | ||
48 | |||
49 | #ifndef BOOTLOADER | ||
50 | /* Define this if your LCD can be enabled/disabled */ | ||
51 | #define HAVE_LCD_ENABLE | ||
52 | |||
53 | /* Define this if your LCD can be put to sleep. HAVE_LCD_ENABLE | ||
54 | should be defined as well. */ | ||
55 | #define HAVE_LCD_SLEEP | ||
56 | /* We don't use a setting but a fixed delay after the backlight has | ||
57 | * turned off */ | ||
58 | #define LCD_SLEEP_TIMEOUT (5*HZ) | ||
59 | |||
60 | #define HAVE_TOUCHPAD_SENSITIVITY_SETTING | ||
61 | |||
62 | #define HAVE_HARDWARE_BEEP | ||
63 | |||
64 | #endif /* BOOTLOADER */ | ||
65 | |||
66 | #define CONFIG_KEYPAD GIGABEAT_PAD | ||
67 | |||
68 | /* Define this to enable morse code input */ | ||
69 | #define HAVE_MORSE_INPUT | ||
70 | |||
71 | /* Define this if you do software codec */ | ||
72 | #define CONFIG_CODEC SWCODEC | ||
73 | |||
74 | /* define this if you have a real-time clock */ | ||
75 | #define CONFIG_RTC RTC_S3C2440 | ||
76 | |||
77 | /* define this if you have a disk storage, i.e. something | ||
78 | that needs spinups and can cause skips when shaked */ | ||
79 | #define HAVE_DISK_STORAGE | ||
80 | |||
81 | /* Define this for LCD backlight available */ | ||
82 | #define HAVE_BACKLIGHT | ||
83 | |||
84 | #define HAVE_BUTTON_LIGHT | ||
85 | |||
86 | #define HAVE_BACKLIGHT_BRIGHTNESS | ||
87 | |||
88 | #define HAVE_BUTTONLIGHT_BRIGHTNESS | ||
89 | |||
90 | /* Main LCD backlight brightness range and defaults */ | ||
91 | #define MIN_BRIGHTNESS_SETTING 1 /* 0.5 mA */ | ||
92 | #define MAX_BRIGHTNESS_SETTING 12 /* 32 mA */ | ||
93 | #define DEFAULT_BRIGHTNESS_SETTING 10 /* 16 mA */ | ||
94 | |||
95 | /* Define this if you have a software controlled poweroff */ | ||
96 | #define HAVE_SW_POWEROFF | ||
97 | |||
98 | /* The number of bytes reserved for loadable codecs */ | ||
99 | #define CODEC_SIZE 0x100000 | ||
100 | |||
101 | /* The number of bytes reserved for loadable plugins */ | ||
102 | #define PLUGIN_BUFFER_SIZE 0x80000 | ||
103 | |||
104 | #define AB_REPEAT_ENABLE 1 | ||
105 | |||
106 | /* Define this if you have the WM8975 audio codec */ | ||
107 | #define HAVE_WM8751 | ||
108 | |||
109 | /* Define this if you want to use the adaptive bass capibility of the 8751 */ | ||
110 | /* #define USE_ADAPTIVE_BASS */ | ||
111 | |||
112 | #define HW_SAMPR_CAPS (SAMPR_CAP_88 | SAMPR_CAP_44 | SAMPR_CAP_22 | \ | ||
113 | SAMPR_CAP_11) | ||
114 | |||
115 | /* All exact rates for 16.9344MHz clock */ | ||
116 | #define CODEC_SRCTRL_11025HZ (0x19 << 1) | ||
117 | #define CODEC_SRCTRL_22050HZ (0x1b << 1) | ||
118 | #define CODEC_SRCTRL_44100HZ (0x11 << 1) | ||
119 | #define CODEC_SRCTRL_88200HZ (0x1f << 1) | ||
120 | |||
121 | #define HAVE_HEADPHONE_DETECTION | ||
122 | |||
123 | #define BATTERY_CAPACITY_DEFAULT 830 /* default battery capacity */ | ||
124 | #define BATTERY_CAPACITY_MIN 830 /* min. capacity selectable */ | ||
125 | #define BATTERY_CAPACITY_MAX 830 /* max. capacity selectable */ | ||
126 | #define BATTERY_CAPACITY_INC 25 /* capacity increment */ | ||
127 | #define BATTERY_TYPES_COUNT 1 /* only one type */ | ||
128 | |||
129 | /* Hardware controlled charging with monitoring */ | ||
130 | #define CONFIG_CHARGING CHARGING_MONITOR | ||
131 | |||
132 | /* define current usage levels */ | ||
133 | #define CURRENT_NORMAL 46 /* 18 hours from an 830 mah battery*/ | ||
134 | #define CURRENT_BACKLIGHT 30 /* seems reasonable */ | ||
135 | #define CURRENT_RECORD 0 /* no recording on the gigabeat F/X */ | ||
136 | |||
137 | /* define this if the unit can be powered or charged via USB */ | ||
138 | #define HAVE_USB_POWER | ||
139 | |||
140 | /* define this if the unit has a battery switch or battery can be removed | ||
141 | * when running */ | ||
142 | #define HAVE_BATTERY_SWITCH | ||
143 | |||
144 | #define HAVE_LCD_FLIP | ||
145 | |||
146 | /* Define this if your LCD can set contrast */ | ||
147 | #define HAVE_LCD_CONTRAST | ||
148 | |||
149 | #define MIN_CONTRAST_SETTING 0 | ||
150 | #define MAX_CONTRAST_SETTING 63 | ||
151 | #define DEFAULT_CONTRAST_SETTING 47 /* Match boot contrast */ | ||
152 | |||
153 | /* LCD invert - does not currently work */ | ||
154 | /* #define HAVE_LCD_INVERT */ | ||
155 | |||
156 | /* Define this if you have a Motorola SCF5249 */ | ||
157 | #define CONFIG_CPU S3C2440 | ||
158 | |||
159 | /* Define this if you want to use coldfire's i2c interface */ | ||
160 | #define CONFIG_I2C I2C_S3C2440 | ||
161 | |||
162 | /* define this if the hardware can be powered off while charging */ | ||
163 | #define HAVE_POWEROFF_WHILE_CHARGING | ||
164 | |||
165 | /* The size of the flash ROM */ | ||
166 | #define FLASH_SIZE 0x400000 | ||
167 | |||
168 | /* Define this to the CPU frequency */ | ||
169 | #define CPU_FREQ 16934400 | ||
170 | |||
171 | /* Define this if you have ATA power-off control */ | ||
172 | #define HAVE_ATA_POWER_OFF | ||
173 | |||
174 | #define CONFIG_LCD LCD_GIGABEAT | ||
175 | |||
176 | /* Offset ( in the firmware file's header ) to the file CRC */ | ||
177 | #define FIRMWARE_OFFSET_FILE_CRC 0 | ||
178 | |||
179 | /* Offset ( in the firmware file's header ) to the real data */ | ||
180 | #define FIRMWARE_OFFSET_FILE_DATA 8 | ||
181 | |||
182 | /* Define this if you have adjustable CPU frequency */ | ||
183 | /* #define HAVE_ADJUSTABLE_CPU_FREQ */ | ||
184 | |||
185 | #define BOOTFILE_EXT "gigabeat" | ||
186 | #define BOOTFILE "rockbox." BOOTFILE_EXT | ||
187 | #define BOOTDIR "/.rockbox" | ||
188 | |||