1 files changed, 122 insertions, 122 deletions

diff --git a/manual/getting_started/ipod_install.tex b/manual/getting_started/ipod_install.tex
index 6c36edead3..5bd320b618 100755
--- a/manual/getting_started/ipod_install.tex
+++ b/manual/getting_started/ipod_install.tex
@@ -28,20 +28,20 @@ you wish. Note that these files should be saved onto your computer's hard disk,
   
   \item Next, download the following file to the installation folder: 
 
-    \opt{ipodvideo}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
+    \opt{ipodvideo}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-ipod
     video.ipod}} 
     \opt{ipodnano}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    nano.ipod}} 
+    ipodnano.ipod}} 
     \opt{ipodmini}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    mini1g.ipod} or \url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    mini2g.ipod} depending on which generation your \dap{} is.  \fixme{Describe 
+    ipodmini1g.ipod} or \url{http://download.rockbox.org/bootloader/ipod/bootloader-
+    ipodmini2g.ipod} depending on which generation your \dap{} is.  \fixme{Describe 
     how to identify 1/2G}} 
     \opt{ipodcolor}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    color.ipod}} 
+    ipodcolor.ipod}} 
     \opt{ipod4g}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    4g.ipod}} 
+    ipod4g.ipod}} 
     \opt{ipod3g}{\url{http://download.rockbox.org/bootloader/ipod/bootloader-
-    3g.ipod}}
+    ipod3g.ipod}}
 
   \item Next, open a command prompt (Windows) or terminal window (Mac OSX and Linux).
   
@@ -57,121 +57,121 @@ you wish. Note that these files should be saved onto your computer's hard disk,
   
   \item Connect your ipod to your computer.
 
-                If you haven't already done so, you should now plug your iPod into your 
-                computer (via either the USB or Firewire cable).
-
-                \fixme{Notes about closing itunes, enabling the ``show ipod as disk'' option 
-                in ipod, anything else?}
-
-        \item Find your ipod with ipodpatcher (Windows users only)
-
-                Windows users:  Type the following command to search for ipods attached to 
-                your computer: 
-                        \begin{code} 
-                                ipodpatcher \-\-scan 
-                        \end{code}
-                
-                When ipodpatcher finds your ipod, remember the number it displays - this 
-                will    be the number you use to access your ipod in the following steps.
-
-                \note{Windows users require administrator rights for running    ipodpatcher. 
-                Either re-login as administrator, or open a command prompt running under an 
-                administrator account by using one of the "Run as" features     of Windows XP.}
-
-        \item Find your ipod (Mac OS X users only)
-
-                Attach your iPod to your Mac (using either USB or Firewire) and wait for 
-                iTunes to open. When iTunes opens, close it down.  In your Terminal window, 
-                type the command mount and press enter. This will list all the disks (and 
-                other devices) that are "mounted" on your computer. The last    drive in the 
-                list should be your iPod. For example: 
-                \begin{code}
-                         /dev/disk1s2 on /Volumes/DAVE_S IPOD 1 (local, nodev, nosuid) 
-                \end{code}
-
-                In order to install the ipod bootloader, you need to "unmount" this disk 
-                using   the following command: 
-                        \begin{code} 
-                                diskutil unmount /dev/disk1s2 
-                        \end{code}
-                        
-                replacing ``/dev/disk1s2'' with the device name Mac OS has assigned to your
-                ipod. This may take a few seconds, after which Mac OS will say ``Volume 
-                /dev/disk1s2 unmounted.''       ``/dev/disk1s2'' refers to the second partition on 
-                /dev/disk1 - remember   ``/dev/disk1'' for the next step.
-
-                It's possible that itunes will try to be ``helpful'' and remount your ipod 
-                after you modify it with ipodpatcher. If this happens, you need to unmount 
-                it again using the above command. 
+    If you haven't already done so, you should now plug your iPod into your 
+    computer (via either the USB or Firewire cable).
+
+    \fixme{Notes about closing itunes, enabling the ``show ipod as disk'' option 
+    in ipod, anything else?}
+
+  \item Find your ipod with ipodpatcher (Windows users only)
+
+    Windows users:  Type the following command to search for ipods attached to 
+    your computer: 
+      \begin{code} 
+        ipodpatcher --scan 
+      \end{code}
+    
+    When ipodpatcher finds your ipod, remember the number it displays - this 
+    will  be the number you use to access your ipod in the following steps.
+
+    \note{Windows users require administrator rights for running  ipodpatcher. 
+    Either re-login as administrator, or open a command prompt running under an 
+    administrator account by using one of the "Run as" features of Windows XP.}
+
+  \item Find your ipod (Mac OS X users only)
+
+    Attach your iPod to your Mac (using either USB or Firewire) and wait for 
+    iTunes to open. When iTunes opens, close it down.  In your Terminal window, 
+    type the command mount and press enter. This will list all the disks (and 
+    other devices) that are "mounted" on your computer. The last  drive in the 
+    list should be your iPod. For example: 
+    \begin{code}
+       /dev/disk1s2 on /Volumes/DAVE_S IPOD 1 (local, nodev, nosuid) 
+    \end{code}
+
+    In order to install the ipod bootloader, you need to "unmount" this disk 
+    using   the following command: 
+      \begin{code} 
+        diskutil unmount /dev/disk1s2 
+      \end{code}
+      
+    replacing ``/dev/disk1s2'' with the device name Mac OS has assigned to your
+    ipod. This may take a few seconds, after which Mac OS will say ``Volume 
+    /dev/disk1s2 unmounted.'' ``/dev/disk1s2'' refers to the second partition on 
+    /dev/disk1 - remember   ``/dev/disk1'' for the next step.
+
+    It's possible that itunes will try to be ``helpful'' and remount your ipod 
+    after you modify it with ipodpatcher. If this happens, you need to unmount 
+    it again using the above command. 
   
-        \item Create a backup of your ipod's firmware partition
-
-                Type the following command, replacing "[device]" with the number (for 
-                Windows users) or the device name (Mac OS X and Unix users) assigned to 
-                your ipod that  you found in the previous step: 
-                        \begin{code} 
-                                ipodpatcher [device] -r bootpartition.bin (Windows) 
-                        \end{code}
-
-                        or
-
-                        \begin{code}
-                                ./ipodpatcher [device] -r bootpartition.bin (Mac OS X/Unix)
-                        \end{code}
-        
-                This should create a file in the current folder called bootpartition.bin 
-                (approximately 40MB for the iPod 3G, 4G and Color/Photo, 80MB for the Nano 
-                1st gen and 30GB Video, and 112MB for the 60GB Video) containing a copy of 
-                the ``firmware partition'' from your iPod.
-
-                If it ever becomes necessary (i.e. your ipod refuses to start), you can 
-                restore this backup to your ipod using the command ipodpatcher [device] -w 
-                bootpartition.bin (Windows) or ./ipodpatcher [device] -w bootpartition.bin 
-                (Mac OS X/Unix).   
-        
-        \item Install the bootloader.
-
-                Windows users should now type:
-                \begin{code}
-                        ipodpatcher [device] -a 
-                                \opt{ipodvideo}{bootloader-video.ipod}
-                \opt{ipodnano}{bootloader-nano.ipod}
-                          \opt{ipodmini}{bootloader-mini1g.ipod 
-                                \end{code} 
-                                or
-                                \begin{code}
-                                        ipodpatcher [device] -a bootloader-mini2g.ipod
-                                }
-                \opt{ipodcolor}{bootloader-color.ipod}
-                    \opt{ipod4g}{bootloader-4g.ipod}
-                    \opt{ipod3g}{bootloader-3g.ipod}
-                \end{code}
-
-                and Mac OS X/Unix users should type:
-                \begin{code}
-                        ./ipodpatcher [device] -a 
-                        \opt{ipodvideo}{bootloader-video.ipod}
-                \opt{ipodnano}{bootloader-nano.ipod} 
-                          \opt{ipodmini}{bootloader-mini1g.ipod 
-                                \end{code} 
-                                or
-                                \begin{code}
-                                        or ipodpatcher [device] -a bootloader-mini2g.ipod
-                                }
-                \opt{ipodcolor}{bootloader-color.ipod}
-                    \opt{ipod4g}{bootloader-4g.ipod}
-                    \opt{ipod3g}{bootloader-3g.ipod}
-                \end{code}
-
-        Replace [device] with the number (Windows users) or device name (Mac OS X/Unix 
-        users) you've been using to access your ipod.
-
-        You can now disconnect your ipod from your computer in the normal way. This 
-        should cause your iPod to reboot and start Rockbox.
-
-        \item Troubleshooting.
-
-        \fixme{Add some notes here about common problems - "rockbox error -1" is the 
-        main one. Or maybe have a new troubleshooting page.}
+  \item Create a backup of your ipod's firmware partition
+
+    Type the following command, replacing "[device]" with the number (for 
+    Windows users) or the device name (Mac OS X and Unix users) assigned to 
+    your ipod that  you found in the previous step: 
+      \begin{code} 
+        ipodpatcher [device] -r bootpartition.bin (Windows) 
+      \end{code}
+
+      or
+
+      \begin{code}
+        ./ipodpatcher [device] -r bootpartition.bin (Mac OS X/Unix)
+      \end{code}
+  
+    This should create a file in the current folder called bootpartition.bin 
+    (approximately 40MB for the iPod 3G, 4G and Color/Photo, 80MB for the Nano 
+    1st gen and 30GB Video, and 112MB for the 60GB Video) containing a copy of 
+    the ``firmware partition'' from your iPod.
+
+    If it ever becomes necessary (i.e. your ipod refuses to start), you can 
+    restore this backup to your ipod using the command ipodpatcher [device] -w 
+    bootpartition.bin (Windows) or ./ipodpatcher [device] -w bootpartition.bin 
+    (Mac OS X/Unix).   
+  
+  \item Install the bootloader.
+
+    Windows users should now type:
+    \begin{code}
+      ipodpatcher [device] -a 
+        \opt{ipodvideo}{bootloader-video.ipod}
+        \opt{ipodnano}{bootloader-nano.ipod}
+        \opt{ipodmini}{bootloader-mini1g.ipod 
+          \end{code} 
+          or
+          \begin{code}
+            ipodpatcher [device] -a bootloader-mini2g.ipod
+          }
+        \opt{ipodcolor}{bootloader-color.ipod}
+        \opt{ipod4g}{bootloader-4g.ipod}
+        \opt{ipod3g}{bootloader-3g.ipod}
+    \end{code}
+
+    and Mac OS X/Unix users should type:
+    \begin{code}
+      ./ipodpatcher [device] -a 
+      \opt{ipodvideo}{bootloader-video.ipod}
+        \opt{ipodnano}{bootloader-nano.ipod} 
+        \opt{ipodmini}{bootloader-mini1g.ipod 
+          \end{code} 
+          or
+          \begin{code}
+            or ipodpatcher [device] -a bootloader-mini2g.ipod
+          }
+        \opt{ipodcolor}{bootloader-color.ipod}
+        \opt{ipod4g}{bootloader-4g.ipod}
+        \opt{ipod3g}{bootloader-3g.ipod}
+    \end{code}
+
+  Replace [device] with the number (Windows users) or device name (Mac OS X/Unix 
+  users) you've been using to access your ipod.
+
+  You can now disconnect your ipod from your computer in the normal way. This 
+  should cause your iPod to reboot and start Rockbox.
+
+  \item Troubleshooting.
+
+  \fixme{Add some notes here about common problems - "rockbox error -1" is the 
+  main one. Or maybe have a new troubleshooting page.}
   
 \end{enumerate} 
\ No newline at end of file