Optional dual-boot support in iAudio X5 and M5 bootloader, based on FS#5289.

In order to enable it, #define HAVE_DUALBOOT when building the bootloader.
Do not use the automatically created x5_fw.bin or m5_fw.bin, but use mkboot
to create a new firmware file from an OF x5_fw.bin resp. m5_fw.bin and
bootloader.bin.

The dual-boot bootloader boots the OF when pressing Play (main or remote) for
more than 3 seconds. Hold it a bit longer because the OF also checks buttons.
Short press boots rockbox.

As a bonus, the Play button read (for hold check) is done a bit earlier for
single-boot mode as well.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30018 a1c6a512-1295-4272-9138-f99709370657

1 files changed, 8 insertions, 8 deletions

diff --git a/bootloader/iaudio_coldfire.c b/bootloader/iaudio_coldfire.c
index 5639a0e59b..9c829c4a34 100644
--- a/bootloader/iaudio_coldfire.c
+++ b/bootloader/iaudio_coldfire.c
@@ -123,6 +123,10 @@ void check_battery(void)
     }
 }
 
+#if defined(IAUDIO_M5) || defined(IAUDIO_X5)
+int initial_gpio_read;
+#endif
+
 void main(void)
 {
     int i;
@@ -144,17 +148,13 @@ void main(void)
     if ((GPIO_READ & 0x80000000) == 0)
         rc_on_button = true;
 #elif defined(IAUDIO_M5) || defined(IAUDIO_X5)
-    int data;
-
     or_l(0x0e000000, &GPIO_FUNCTION); /* main Hold & Power, remote Play */
     and_l(~0x0e000000, &GPIO_ENABLE);
-    
-    data = GPIO_READ;
-    
-    if ((data & 0x04000000) == 0)
+
+    if ((initial_gpio_read & 0x04000000) == 0)
         on_button = true;
-        
-    if ((data & 0x02000000) == 0)
+
+    if ((initial_gpio_read & 0x02000000) == 0)
         rc_on_button = true;
 #endif